SUNCO LIGHTING GIE-LF-2FT-25W-L-H LED Linear Hanging Suspended Light User Guide
- June 1, 2024
- Sunco Lighting
Table of Contents
SUNCO LIGHTING GIE-LF-2FT-25W-L-H LED Linear Hanging Suspended Light
Product Information
Specifications:
- Model: GIE-LF-2FT-25W-L-H
- Size: 2FT
- Power: 15/20/25W
- Input Voltage: AC100-277V
- Dimmable: Yes
- PF: >0.9
- Efficacy: 130lm/w
- Ra: 80
- CCT: 3500/4000/5000/6500K
- CCT Tunable: Yes
- Watt Tunable: 2FT – 3500K, 4000K, 5000K, 6500K at 15W, 20W, 25W
Product Features:
- CCT tunable from 3500K to 6500K
- Watt tunable
- Dimension: A – 23.94in/608mm, B – 2.76in/70mm, C – 3.28in/82mm
Installation Instructions:
- Preparation: Take out the fixture and accessories package from the box.
- Fixing Cable to Canopies:
- Release the locknut pass the cable through canopy A and tighten the nut. Repeat for canopy B.
- Attach the Power Cord to the Fixture:
- Remove the down-light lens and end cover.
- Connect the power cord to the connector inside the housing and fix it to the outlet hole.
- Reinstall the end cover.
- Install Canopy B and Hang the Fixture:
- Position mounting holes with a positioning plate.
- Hang the fixture with the cable and adjust it to the desired height.
- Install Canopy A and Connect to Main Power Wires:
- Pass the power cord through canopy A and connect it to the main power wires.
- Fix canopy A to the crossbar to cover the J-box.
- Hang the Fixture Left End: Ensure the fixture is securely hung.
Frequently Asked Questions
Q: Can I install the fixture myself?
A: The installation and maintenance must be completed by electricians or professionals.
Q: What should I do before installing or maintaining the fixture?
A: Please cut off the power before installation and maintenance.
Q: Can the fixture be covered with thermally insulating material?
A: The fixture is not allowed to be covered with thermally insulating material.
Q: How do I clean the fixture?
A: Please keep away from corrosive substances and keep the fixture clean.
Product Features
- ETL, CETL & DLC listed
- 2ft 15W-20W-25W
- Lumen efficiency: 130lm/w
- 0-10V dimmable driver
- Input voltage: 100-277VAC
- Suspension mounting installation
- 5-year warranty
Dimension
Testing Report
LUMINOUS INTENSITY DISTRIBUTION DIAGRAM
Simulation Chart
Specification
Model| Size| Power| Input
Voltage
| Dimma
ble
| PF| Efficacy| Ra| CCT
---|---|---|---|---|---|---|---|---
GIE-LF-2FT-25W-L-H| 2FT| 15/20/25W| AC100-277V| 0-10V| >0.9| 130lm/w| 80|
3500/4000/5000/6500K
Installation
Pendant Mounting, Drywall Ceiling (Offgrid)
-
Preparation
Take out the fixture and accessories package from the box.
-
Fix cable to canopies
Release the locknut, pass the cable through canopy A and tighten the nut to fix the cable. Repeat to fix the cable to canopy B.
-
Attach the power cord to the fixture
Remove the down-light lens with a suction cup. Remove the end cover nearby the outlet hole by removing the 4 screws as shown. Connect the power cord to the connector inside the housing and fix it to the outlet hole with a Rubber cable sheath. Then reinstall the end cover.
-
Install canopy B and hang the fixture right end
Install the canopy B after positioning the mounting holes with the positioning plate. Hang the right end of the fixture with cable and adjust it to the desired height. Make sure that the fixture is securely hung.
-
Install canopy A
Pass the power cord through the canopy A and connect it to the main power wires. Mount the cross-bar onto the J-box and fix canopy A to the cross-bar to cover the J-box.
-
Hang the fixture left end
Make sure that the fixture is securely hung. The installation is completed .
CAUTION
Please isolate two dimming wires (pink and purple) by P2 terminal individually
if no need for dimming; MUST connect wires with corresponding colours.
Important Notes
- The installation and maintenance must be completed by electricians or professionals.
- Please cut off the power before installation and maintenance.
- The fixture is not allowed to be covered with thermally insulating material.
- Please keep away from the corrosive substance and keep the fixture clean and dry.
- Working temperature: -4°F to 104°F, storage temperature: -22°F to 140°F.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>