ZEBRA ZD220,ZD230 Thermal Transfer Desktop Printer Instruction Manual
- August 7, 2024
- ZEBRA
Table of Contents
ZEBRA ZD220,ZD230 Thermal Transfer Desktop Printer
Specifications
- Model: ZD220/ZD230
- Manufacturer: Zebra
- Print Technology: Direct Thermal
- Maximum Print Width: 4.09 inches (104 mm)
- Resolution: 203 dpi (8 dots/mm)
- Maximum Print Speed: 4 inches per second (102 mm/s)
- Connectivity: USB, Bluetooth (optional)
- Media Type: Roll-fed or fanfold, die-cut or continuous direct thermal labels
- Power Source: AC adapter
Product Usage Instructions
Set Up Your Printer:
-
1. Load Media:- Remove and discard the outer layer of the media.
- Open the printer and place the roll on the holder.
- Power On and Print:
Press the power button to turn on the printer. Perform media calibration by pressing and holding the FEED button until the Status LED flashes. Test print configuration report by pressing and holding the FEED button until the Status LED blinks.
FAQ
- Q: Where can I find genuine Zebra supplies?
- A: Genuine Zebra supplies can be purchased from authorized retailers listed on www.zebra.com/supplies.
- Q: How do I register my Zebra printer?
- A: To register your Zebra printer, visit www.zebra.com/register and follow the on-screen instructions.
Scan for Help
What is Included
Not Included
Genuine Zebra Supplies
Install Software
Download and Install Zebra Setup Utilities
Set Up Your Printer
Load Media
Power On and Print
-
Press and release Power Button. Lights will cycle
-
Printer Ready when Status Light is steady Green
-
Perform Media Calibration:
Press and hold the FEED button until the Status Light blinks off and on TWICE, then release -
Test Print Configuration Report:
- Press and hold the FEED button until the Status
- Light blinks off and on ONCE, then release
Register
This is a Zebra QuickHelp QR Code
You will find them on your Zebra product and documentation. Open the camera app on your smart mobile device and point it at the QR code to view helpful content in a browser
Get Help
Contact
NA and Corporate Headquarters
- +1 800 423 0442
- inquiry4@zebra.com
Asia-Pacific Headquarters
- +65 6858 0722
- contact.apac@zebra.com
EMEA Headquarters
- zebra.com/locations
- contact.emea@zebra.com
Latin America Headquarters
- +1 847 955 2283
- la.contactme@zebra.com
Zebra and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2019 Zebra Technologies Corporation and/or its affiliates. All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>