MARTEC Fino LED Ceiling Light Installation Guide
- June 3, 2024
- martec
Table of Contents
Fino LED Ceiling Light
Installation Guide
Fino LED Ceiling Light
We strongly recommend that you read this manual carefully before installation.
Installation MUST be carried out by a qualified and licensed electrician.
Models Parameters:
MLFO34516WD 16W LED Ceiling Light 210mm White
MLFO34518WD 18W LED Ceiling Light 280mm White
MLFO34518WS 18W LED Ceiling Light 280mm with
Microwave Motion Sensor White
MLFO34518MD 18W LED Ceiling Light 280mm Black
MLFO34524WD 24W LED Ceiling Light 350mm White
MLFO34524MD 24W LED Ceiling Light 350mm Black
MLFO34532WD 32W LED Ceiling Light 420mm White
MLFO34532MD 32W LED Ceiling Light 420mm Black
MLFO34538WD 38W LED Ceiling Light 500mm White
Part List:
- Lamp cover
- Light body
- Colour temperature switch
- Wall mount screws
- Sealing ring
- Insulation tube
Installation Instructions
Step 1. Switch OFF the mains supply
Step 2. Rotate the wall mounting plate “A” from light body “B” counter-
clockwise to unlock the safety lock “C” and unplug the terminal block “F”.
Step 3. Use the wall mounting plate “A” as a template to drill three holes in
the wall or ceiling, then place the dowel”D” into the holes.
Step 4. Feed mains supply through the insulation tube “I” and connect live “L”
and neutral “N” wires to the terminal block “E”.
Step 5. Use screws “G” and washer “H” provided to secure the wall mounting
plate “A” onto a flat surface.
Step 6. Lock the safety lock “C” and plug the terminal block “F” back on.
Rotate the light body “B” clockwise to refit back to the mounting plate “A”.
NB: Ensure the fitting is firmly tightened to maintain IP rating.
Step 7. Switch ON the mains supply and turn the oyster light on.
Data Table
Models| Power (W)| PF| CCT (K)| Weight (KG)| Operation Temperature (Degree)|
IP
---|---|---|---|---|---|---
MLF034516WD| 16| 0.9| 3000 /4000 /5000| | +40° -20°| 54
MLF034518WD| 18| 0.9| 3000 /4000 /5000| | +40° -20°| 54
MLF034518MD| 18| 0.9| 3000 /4000 /5000| | +40° -20°| 54
MLF034518W5| 18| 0.9| 3000 /4000 /5000| | +40° -20°| 54
MLF034524WD| 24| 0.9| 3000 /4000 /5000| | +40° -20°| 54
MLF034524MD| 24| 0.9| 3000 /4000 /5000| | +40° -20°| 54
MLF034532WD| 32| 0.9| 3000 /4000 /5000| | +40°-20°| 54
MLF034524MD| 32| 0.9| 3000 /4000 / 5000| | +40° -20°| 54
MLF034538WD| 38| 0.9| 3000 / 4000 /5000| | +40° -20°| 54
CCT (Colour Changable Temperature)
Sensor Setting (MLFO34518WS)
Manual Mode
Step 1. Set the fitting in AUTO MODE.
Step 2. Turn the wall switch OFF then turn it back ON twice within 3 seconds.
NB: Timing must be accurate. This cannot be done either too quick (<1s) or too
slow (>3s)
Sensor Mode
Step 1. Turn the wall switch OFF then turn it back ON.
WARNING
- Installation of product MUST follow SAA standards and meet local authority regulations.
- Installation MUST be carried out by a qualified and licensed electrician.
- Light MUST be earthed.
- Light MUST be firmly installed to a flat solid surface, wall or ceiling.
- DO NOT immerse any part of the light fitting into water or any form of liquid.
- DO NOT look directly into the LED light.
- The warranty is VOID if product is not installed according to this installation guide.
5 Year Replacement Warranty
Visit our website for details https://www.martecaustralia.com.au/warranty-
statement/
E: sales@martecltd.com.au | P: 02 8778 7500
www.martecaustralia.com.au