MARTEC Lighting MLXCO34615 Cove LED Bunker Oval Shape Installation Guide

MARTEC Lighting MLXCO34615 Cove LED Bunker Oval Shape

We strongly recommend that you read this manual carefully before installation. Installation MUST be carried out by a qualified and licensed electrician.

Models Parameters
MLXCO34615S :15W IP54 Tricolour LED Bunker Oval PIR Motion Sensor White

Installation Instructions

• Switch off the mains

• Remove the diffuser

• Mark on the desired mounting surface.

• Drill holes and put the expansion nuts into the hole

• Mount the housing onto the wall, select desired CCT and connect to power as shown above, Plug both power and sensor connectors between housing and the light fitting.

• Put the diffuser back on

• Put the trim back on

• Switch on the mains

Data Table

Models| Power (W)| PF| CCT (K)| Weight (KG)| Operation Temperature (Degree)| IP| In-rush Current (A)
---|---|---|---|---|---|---|---
MLXCO34615S| 15| ≧0.5| 3000

4000

6500

| 0.5| +40° -20°| 54| 5

Sensor Settings

• SENS:
  SENS controls the sensing distance of the sensor. When the KNOB is set to:-

  •  “+” (4m) = maximum sensing distance is reached
  • ”-” (1m) = minimum sensing distance is reached

• TIME:

  • TIME duration is adjustable from 3s (±1) to 8min (±1min)
  •  Turn this knob towards “+” (8mins) to increase the delay time
  • Turn this knob towards “-” (3s) to decrease the delay time

• LUX:
  LUX controls the ambient light of the load lamp. When the KNOB is set to:-

  • “Sun” position = Daytime.
    The sensor detects the movement of the human body and triggers the light at night and day.

  • “Moon” position = Evening.
    The sensor detects the movement of the human body at night and triggers the light of the load.
    NB: The sensor does not work during the day. Ambient illumination: 5 – 2000lux

WARNING

• Installation of product MUST follow SAA standards and meet local authority regulations.
• Installation MUST be carried out by a qualified and licensed electrician.
• Light MUST be earthed.
• Light MUST be firmly installed to a flat solid surface, wall or ceiling.
• DO NOT immerse any part of the light fitting into water or any form of liquid.
• DO NOT look directly into the LED light.
• The warranty is VOID if product is not installed according to this installation guide.

2 Year Replacement Warranty
Visit our website for details https://www.martecaustralia.com.au/warranty- statement/

E: sales@martecltd.com.au | P: 02 8778 7500 www.martecaustralia.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>