MARTEC Lighting MLXCO34610 LED Bunker Oval Shape Installation Guide
- June 5, 2024
- MARTEC Lighting
Table of Contents
MARTEC Lighting MLXCO34610 LED Bunker Oval Shape
We strongly recommend that you read this manual carefully before installation. Installation MUST be carried out by a qualified and licensed electrician.
Models Parameters
- MLXCO34610 10W IP54 Tricolour LED Bunker Oval PIR Motion Sensor White
- MLXCO34615 15W IP54 Tricolour LED Bunker Oval PIR Motion Sensor White
Installation Instructions
Step 1
Switch off the mains
Step 2
Remove the diffuser
Step 3
Mark on the desired mounting surface.
Step 4
Drill holes and put the expansion nuts into the hole
Step 5
Mount the housing onto the wall, select desired CCT, and connect to power as shown above, Plug the power connector between the housing and the light fitting.
Step 6
Put the diffuser back on
Step 7
Put the trim back on
Step 8
Switch on the mains
Data Table
Models| Power (W)| PF| CCT (K)| Weight
(KG)| Operation Temperature (Degree)| IP| In-rush Current
(A)
---|---|---|---|---|---|---|---
MLXCO34610| 10| ≧0.5| 3000
4000
6500
| 0.4| +40° -20°| 54| 5
MLXCO34615| 15| ≧0.5| 3000
4000
6500
| 0.4| +40° -20°| 54| 5
WARNING
- Installation of product MUST follow SAA standards and meet local authority regulations.
- Installation MUST be carried out by a qualified and licensed electrician.
- Light MUST be earthed.
- Light MUST be firmly installed on a flat solid surface, wall, or ceiling.
- DO NOT immerse any part of the light fitting into water or any form of liquid.
- DO NOT look directly into the LED light.
- The warranty is VOID if the product is not installed according to this installation guide.
Warranty
2 Year Replacement Warranty
Visit our website for details https://www.martecaustralia.com.au/warranty-
statement/.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>