i-PRO WV-QCL102 Universal Camera Mounting Bracket Instruction Manual
- June 3, 2024
- i-PRO
Table of Contents
i-PRO WV-QCL102 Universal Camera Mounting Bracket
Operating Instructions
- Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use.
- The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.
i-PRO Co., Ltd. cannot be held responsible for accidents or damages caused by installation using methods not described in the instruction manual or not using specified parts. In addition, any malfunction caused by such installation is not covered by the product warranty.
“<Control No.: C****>” used in these documents should be used to search for
information on our technical information website
(https://i-pro.com/global/en/surveillance/training-support/support/technical-
information) and will guide you to the right information.
i-PRO Co., Ltd. https://www.i-pro.com/
© i-PRO Co., Ltd. 2022
Caution:
- Before attempting to connect or operate this product, please read these instructions carefully.
Notice:
- This product is not suitable for use in locations where children are likely to be present.
- Do not install this product in locations where ordinary persons can easily reach.
- For information about screws and other parts required for installation, refer to the corresponding section of this document.
Precautions
-
Do not use this bracket except with suitable cameras.
Failure to observe this may cause a drop resulting in injury or accidents. -
Do not install equipment that exceeds the maximum loading weight.
Failure to observe this may cause a drop resulting in injury or accidents.
Be sure to observe the maximum loading weight. -
Refer installation work to the dealer.
Installation work requires technique and experience.
Failure to observe this may cause fire, electric
shock, injury, or damage to the product.
Be sure to consult the dealer. -
The measures of protection against a fall of this product shall be taken.
Failure to observe this may cause a drop resulting in injury or accidents.
Be sure to install the safety wire. -
The screws and bolts must be tightened to the specified torque.
Failure to observe this may cause a drop resulting in injury or accidents. -
Install the product securely on a ceiling in accordance with the installation instructions.
Failure to observe this may cause injury or accidents. -
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
When using this product, also read the “Precautions” described in the operating instructions for the camera to be attached.
Preface
This product is a mounting base for the camera. The camera can be installed by attaching this fixture to the ceiling. Two colors, white and black, are available for installation in consideration of the surrounding landscape.
The latest information about the supported cameras
Specifications
- Ambient operating temperature: –50°C to +60°C {–58°F to +140°F}
- Dimensions: Max. diameter: ø120 mm / Height: 130 mm {ø4-23/32 inches × 5-1/8 inches} (not including camera mounting screw)
- Mass: Approx. 240g (0.53 lbs)
- Finish: Aluminum/steel plate, ABS, white/black
- Max. loading weight: 2 kg
Precautions for installation
-
In order to prevent injury, the product must be securely mounted to the ceiling according to the Installation Guide of this product.
-
This product is designed to be used indoors.
This product is not operable outdoors. Do not expose this product to direct sunlight for hours and do not install the product near a heater or an air conditioner. Otherwise, it may cause deformation, discoloration and malfunction. Keep this product away from water and moisture. -
Make sure to remove this product if it will no longer be used.
Standard Accessories
- Operating Instructions (this document)…….. 1 pc.
- Template……………………………………………………. 1 pc.
Other items that are needed (not included)
- Mounting Screws(M6) or Anchor bolt………..4 pcs.
- Hexagonal wrench (3 mm on each side)……. 1 pc.
- Mounting Screws(M4) or Anchor bolt………..4 pcs.
IMPORTANT
- Minimum pull-out strength: 562 N {126.34 lbf} (per screw)
- For information about the minimum pull-out strength, refer to our technical information website
. - Select screws according to the material of the location that the camera will be mounted to. In this case, wood screws and nails should not be used.
Installation
Refer to the operating instructions of the camera for details on the camera installation (including the cable connection and adjustment).
-
Step 1: Preparations
- Refer to the operating instructions of the camera for details on installing the safety wire (camera accessory).
- Refer to the operating instructions of the camera for details on installing the safety wire (camera accessory).
-
Step 2: Machining the installation surface
-
Step 3: Fixing the bracket
Mounting Screw (4 pcs.) (M6:locally procured)
Minimum pull-out strength: 562 N {126.34 lbf} (per 1 pc.)
-
Step 4: Fixing the camera
1. Turn the hexagonal hole with a hexagonal wrench to loosen the fixation of the movable part. Hexagonal wrench (3 mm on each side) (procured locally)
The following is an illustration of an indoor box type camera as an example.
2. Attach the camera to the head portion of this product.- Step 5: Put the mounting hole of the mounting chassis on the anchor bolt.
1. With power connected to the camera, connect a monitor to the MONITOR OUT terminal to bring up the screen. For models without a MONITOR OUT terminal, use a PC to connect the camera to the network and display the shooting screen.
2. Adjust the camera orientation.
3. Turn the hexagonal hole with a hexagonal wrench to tighten the fixation of the movable part. Hexagonal wrench (3 mm on each side) (procured locally)
Recommended tightening torque:
1.97 N·m {1.45 lbf·ft} (Max. 2.95 N-m{2.17 lbf·ft})
- Step 6: Fixing the safety wire (camera accessory)
Mounting Screw (M4:locally procured)
Minimum pull-out strength: 562 N {126.34 lbf} (per 1 pc.)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>