Fix-A-Floor FIXPRO6 Fix Loose Tiles with Our Injection Adhesive User Manual
- June 3, 2024
- Fix-A-Floor
Table of Contents
Fix-A-Floor FIXPRO6 Fix Loose Tiles with Our Injection Adhesive User Manual
Introducing The NEW Fix-A-Floor Micro Syringe Injector PRO PACK:
Fix-A-Floor’s revolutionary “Patent Pending” design with the 14-gauge blunt Steel injection needle with re-sealable cap, directly attaches to the Fix-A-Floor tube now allowing for additional injection into super narrow or no grout line flooring like marble, tile & stone.
The included 2.5mm diamond drill bit allows for the smallest 2mm holes to be drilled, creating professional, undetectable results! Of course, It’s also great for fixing those squeaky wood floors too! Don’t Remove or Replace, Just Drill & Fill!
The Original Fix-A-Floor the Brand you know and trust worldwide. Fix Your floor today!
How-To Directions
- Unscrew the Tip off the tube.
- With 1/8” bit drill a hole straight into the top of tube nub to open the tube.
- Screw Black Adaptor onto the tube. Remove Resealable Cap for future use if needed.
- Screw down the 14-gauge needle onto the adaptor.
- Using the included 2.5mm diamond drill bit; drill 2-3 holes into the grout lines closest to the problem area.
- Vacuum out any debris.
- Using our recommended caulk gun; a 10:1 thrust ratio, it’s very important to squeeze gently on the trigger allowing for minimum of an 8-10 second stoke each time. If you move too fast or press down too hard with the gun, adhesive can escape out the back of the tube; so nice and slow. No Rush!
- After filling holes, tap on tiles they will usually sound solid ensuring the void has been filled.
- Place weighted object on top of tiles and allow to dry for 24 hrs.
- Then fill holes with matching grout. Your floor is Fixed with Fix-A-Floor
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>