Arealer i09 True Wireless Stereo Earphones User Manual

i09 True Wireless Stereo Earphones
User manual
Imported Wireless 5.0 chips

Compatibility This product is compatible with all Bluetooth-enabled mobile phones (iOS/Android/Windows Phone), tablet PCs, smartwatches, notebooks, and desktop computers.

Product details :

1.8.Earphone LED Indicator
2.9. Microphone
3.7. Touch Button| 4. Charging bin digital display
5.6.Headphone digital display
10. Type-C charging port
---|---

Usage:
For the Best Audio experience, it is recommended your right size silicone earcaps and, please put your cellphones on the same side of the left earphones outdoor.

Powering ON:
Method 1: Take out the earphones from the charger case, and they will “power on”

Method 2：When the earphones are OFF, touch and hold both earphones for 3-5 seconds.The themed light flashes once and with a sound prompt: “power on”

Powering OFF:
Method 1: The earphones will switch off when put into the charger case.
Method 2: Keep the earphones touch button pressed for 3-5 seconds until the Blue LED flashes with a sound prompt: “power off”.
Note: If the earphones were disconnected from the device, the earphones will be powered off automatically after 5mins.

Stereo Mode:

1. Take out the earphones from the charger case, The two earphones turn on and paired automatically, when pairing L/R earphones, the led lights are blinking, after connected successfully, the R earphone light off,and the L earphone still flash .

2. Open the Bluetooth devices page inside settings. Search for “i09” and select it to pair, the Earphone lights be off after the earphones are connected with the device.

Note: If the earphones connected the device once, and the  Bluetooth functions of the device were open, the earphones will be reconnected with the last device automatically

Play Music:
1 Touch the button once to Pause/Play.
2 Keep press the touch button for 1 second and release it (“L” for previous song, “R” For next song)
3 Touch the button twice to adjust the volume(“L”for decreasing,” R” for increasing)
Voice Assistant:
Touch the button three times to activate the Siri voice assistant
Calling:
1 When a call comes in, short press one of the touch buttons in order to answer the call or long press it to reject it.
2 During a phone call, short press the earphone button to end the call, and the earphone will resume its previous working state.
3 During a call, the volume can be controlled via the mobile phone.
4 Stereo mode: both ears have a voice.

Specifications:

• Bluetooth version: V5.0
• Voltage rating and energy capacity: 3.7V/2600mAh
• Battery capacity: 2*3.7V/60mAh
• Charge time: Around 2 hours
• Music playing time: About 5-6h*23Times
• Bluetooth profiles supported: HFP/A2DP/AVRCP
• Operating frequency: 2.40 GHz-2.48 GHz
• RF Sensitivity: -92dBm
• Working temperature range: -10-50℃
• Maximum transmission range: ≤15M

Packing list:

• Earphones *2
• USB cable *1
• Charging case *1
• Earcaps *4(L\ S)
• User manual *1

Important:

1. The host device is a connection between the second device and your mobile phone, it is normal status under high power condumption.
2. When not connected to any device, the earphones will power off automatically after 5 minutes.
3. On iPhones, the battery level of the earphones will be displayed in real-time.
4. When the earphones and the charger case are not used for long periods of time, it is recommended to keep them in a dry place and to recharge them at least every 2 months.

Fault:

Fault

| Cause|

Solutions

---|---|---
Can’t power on| Earbuds are low battery/ Crash| Charge the Earbuds/Keep the earphones touch button pressed for 8 seconds
No charging indication| The Earbuds are not well put into| Adjust Earbuds position
Automatically shut down| Earbuds are low battery| charge the Earbuds
The Earbuds have an echo| The volume is too high or the environment is too noisy| Adjust the volume or change position
The Earbuds are noisy| Outside environment interference or too far away from mobile phone| Change position,or move closer to the mobile phone
Small sound| wearing Earbuds incorrectly or the volume is too low| Adjust the Earbuds position or the mobile phone volume
Signal intermittent| Outside environment interference or too far away from mobile phone| Change to a better environment or move closer to the mobile phone
Earbuds have no sound| Pairing unsuccessful between L and R Earbuds| Put the earphones into the charger case

Warranty card
Warranty period:
12 months from the date of purchase Free of charge service:
During the warranty period, if there is any breakdown caused by the products’ build quality please contact the seller and provide this warranty card together with the sales invoice. The product will be repaired or replaced by a new one. The warranty does not apply under the following circumstances:
1, The product label is broken.
2, Damage caused due to the product being disassembled by a non-authorized repair agent.
3, Damage caused by external force or when it is visible deformation of any of the external parts.
4, The product has been improperly used or stored.
5, Damage or breakdown caused by force majeure.
6, Other situations similar to the above.

Customer service information：

Customer Name|
---|---
Customer Phone|
Customer Address|
Model Number|
Purchase Date|
Dealer|
Invoice number|

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>