multibrackets 7350105213120 M Motorized Public Floorstand Dual Pillar 180 HD Installation Guide
- June 3, 2024
- MULTIBRACKETS
Table of Contents
- 7350105213120 M Motorized Public Floorstand Dual Pillar 180 HD
- WARNING!
- Parts List
- Installation of wheelbase
- Columns to base installation
- Column electric wire management
- TV plate installation
- How to use the control panel
- Fix the vertical rails onto the back of the TV
- TV assembly to cart installation
- Video tray installation
- **Safety instructions
- Troubleshooting
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
M Motorized Public Floorstand Dual Pillar 180 HD
EAN: 7350105213120
Installation manual
7350105213120 M Motorized Public Floorstand Dual Pillar 180 HD
IMPORTANT!
Your Plasma. LCD, TV, Projector, Projector Screan or other HiFi equipment
represents a considerable value.
If screws are included they may not be suitable for the material of your wall,
ceiling or floor.
Replace the screws with sultable ones If needed.
In case you are unsure regarding any aspects of the mounting of this product
please Consult a professional.
Warning!
Always check the depth of the holes bafore starting an installation.
Can fit smaller or larger TVs depending upon VESA and TV weight.
WARNING!
Severe personal injury and property damage can result from improper
installation or assembly.
Read the following warning carefully before beginning.
- If you do not understand the instructions or have any concerns or questions, please contact a qualified local installer.
- Do not install or assemble if the product or hardware is damaged or missing, if you require replacement parts, please contact your local distributor for assistance.
- This product fits most 65″-11 O” LCD / plasma screen; maximum weight of LCD/plasma screen:135kg
- Do not use this product for anything other than the original design.
- This product contains moving parts, please use with caution.
- The manufacturer disclaims any liability for the modifications, improper installation, or installation over the specified weight range. The manufacturer will not be liable for any damages arising out of the use of, or inability louse, the product.
- Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child lo climb on the furnishing and as a result the furnishing may tip over on to the child.” or equivalent.
- Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment may result in death or serious injury due to the furnishing collapsing or over turning onto a child.” or equivalent.
- Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
All images are for reference, lo prevail in product.
Manual
Parts List
Installation of wheelbase
Columns to base installation
Column electric wire management
TV plate installation
How to use the control panel
Reminder:
Please initialize this cart before a TV/Display is mounted on.
After a current o f 100~240V is switched on, press button R for two seconds,
the cart starts the process of initialization, the cart can be used properly
only after 1200 displayed on the control panel.
Height Adjustment| Columns run upwards when button is pressed and down wards
when button is pressed.
---|---
Memory Setting| Press button to switch the function of memory setting or
distance setting. When “M” is lightened, memory setting can be operated. Press
or to your desired height, and press button “S” for two seconds, when
“S–“flashes, you can press either button 1, 2, 3 , and the height setting is
done. Press the number button for two seconds, the preset height is active to
use.
Interval Setting| Press button , when is lightened, distance setting can be
operated. Press button “S” for two seconds, when “S-up” flashes on the control
panel, press to the upper limit. Press button for two seconds to confirm this
top height. When “S-dn” flashes, press to the lower limit. Press button for
two seconds to confirm this bottom height.(If the interval is less than 50mm,
or the upper and lower position are set upside down, “SErr” will be displayed
to remind you setting invalid. Please re-set it)
Child Lock| Press “ ” for two seconds , all the keys become invalid. To resume
the function , please press “ ” for two more seconds. Please enable child lock
after you adjust the productto your desired height, to avoid any potential
accidents by unaware touch on control keys.
Initialization| Press button R for two seconds, initialization is active and
will complete after 1200 displayed on the control panel.
Fix the vertical rails onto the back of the TV
TV assembly to cart installation
Video tray installation
**Safety instructions
**
(Read carefully)
Pay attention when use
- Make sure TV weight within 135kg;
- Make sure TV mounted in the middle, avoiding any damage or loss caused by uneven loading weight.
- Cart shall be free of knock when operation.
- Electric wire should be long enough when moving cart up, avoiding any damage to the wires by over-stretching, i n case of accidents like creepage or electric shock.
- Do not locate cart on inclined or uneven surface, avoiding any damage or loss caused by cart tipping over.
- Unlock the caster brakes before moving cart. Push and move cart slowly to the specific location. Must lock the caster brakes after move!
- No use of worn-out wires.
- Pull out the power plug from socket by holding plug head. It is strictly forbidden t o drag wires.
- The maximum load parameter of the power adapter is 29V/6A, The continuous working time of the product can not exceed 3 minutes.
- This appliance can be used by children aged from 16 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance i n a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. If the supply cord is damaged, i t must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- ①Disconnect the supply when carrying out maintenance and cleaning;
②Examine the appliance frequently for signs of wear or damage. If there are such signs or if the appliance has been misused or does not work, contact t h e supplier for further information.
③®Do not allow children to play with fixed controls and remote controls.
④When operating a switch that initiates and maintains the movement of the Product or terminates the movement of the Product or causes a change of the direction of the movement of the Product, make sure that other persons are kept away.
Troubleshooting
Guidance on Malfunction Code:
When cart works abnormally, there will be a malfunction code flashing on the
control panel, indicating you the possible problem. Please take action advised
below to solve the problem.
| Code | Problem | Action |
|---|---|---|
| E01 | Left electric motor unconnected | Check and make sure the left electric |
motor is well connected with the control wire.
E02| Right electric motor unconnected| Check and make sure the right electric
motor is well connected with the control wire.
E03| Over current in Left electric motor| Over-weight on left side. Locate TV
to the middle.
E04| Over current in Right electric motor| Over-weight on right side. Locate
TV to the middle.
E05| Over current in Main electric motor| Over-weight on cart. Make sure all
weight loaded on cart within capacity.
E06| Electric motor overheat| Operate too long period of time. The motor will
be enforced to cool down after 3 minutes continuous work, and it cools after
15 minutes.
E08| Out of balance| At least 4mm height difference between two columns when
they slide.Restore factory settings
M Motorized Public Floorstand Dual Pillar 180 HD
WARRANTY CARD
MULTIBRACKETS.COM
MULTIBRACKETS™Limited Warranty
Multibrackets warrants its products to be free of defects in material and
workmanship for the product’s Warranty Period. The Warranty Period commences
on the original purchase date of the product.
All Multibrackets products are covered by a limited product warranty:
- FIVE (5) years for metal video monitor mounts; all racks and non-electrical rack accessories
- TWO (2) years for gaslifts and sit-stand workstations
- ONE (1) year for all motorized and/or automated products, plastic speaker mounts; all speaker stands; all furniture; all wood (MDF) accessories
For warranty claims made during the Warranty Period, MULTI-BRACKETS will
replace any defective product part free of charge. Should a part on your
Multibrackets product fail, please create an RMA case on
www.multibrackets.com/support to
make a warranty claim. We will await your documentation and then discuss the
problem with you and once we confirm the product is under war-ranty, we will
ship replacement parts to you.
This Limited Warranty does not cover the costs of removing and replacing
defective parts from your Multibrackets product. So, if your problem requires
a repair technician, you must pay any labor charges. This Limited Warranty
extends only to the original purchaser of the product and is automatically
void if your Multibrackets product is modified in any way, improperly
installed, taxed beyond its stated weight capacity or otherwise misused or
abused. All Multibrackets products are intended for indoor use only and any
outdoor use voids this Limited Warranty. The Limited Warranty for wall and
ceiling mounts is void if the mount is moved from its initial installation. To
the maximum extent permitted by applicable law, Multibrackets disclaims any
other warranties, express or implied, including warranties of fitness for a
particular purpose and war-ranties of merchantability. Multibrackets will not
be liable for any damages whatsoever arising out of the use or inability to
use its products, even if Multibrackets has been advised of the possibility of
such damages To the maximum extent permitted by applicable law, Multibrackets
disclaims any responsibility for incidental or consequential damages.
Multibrackets TM Stockholm Sweden 2016,
www.multibrackets.com
The content of this manual is subject to change without further notice. The
latest version of this manual can be found online under the product name on
the website: www.multibrackets.com
2 PERSONS RECOMMENDED
FOR INSTALLING THIS PRODUCT.
www.multibrackets.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>