actto B703 Bluetooth Mechanical Keyboard User Manual

actto B703 Bluetooth Mechanical Keyboard

Bluetooth connection method (3 devices connected)

(CH 1) Connecting to the first Bluetooth device

1. To activate the Bluetooth CH 1 indicator, turn the mode switch dial. (Blue LED blinking / ready to pair) 2. Activate the Bluetooth function on the device to be connected, and then select “ActtokB- tem No. (B703 or B705). (EBlue LED ights up) dial

(CH 2) Connecting to the second Bluetooth device

1. To activate the Bluetooth CH 2 indicator, turn the mode switch dial (Blue LED Blinking/ ready to pair) 2. Activate the Bluetooth function on the device to be connected, and then select “ActtokB- tem No. (B703 or B705)”. (Blue LED ights up)

(CH 3) Connecting to the third Bluetooth device

1. To activate the Bluetooth CH 3 indicator, turn the mode switch dial. (Blue LED blinking / ready to pair) 2. Activate the Bluetooth function on the device to be connected, and then select “ActtokB – Item No. (B703 or B705)”. (Blue LED ights up)

Note: An LED WIl remain lluminated on the corresponding channel once paining has been completed.
(How to re-pair) You can re-pair your device with another device by pressing Fn + K together tor approximately three seconds. [How to change Bluetooth channel] Rotate the ” mode switch dial” to change. (AutomatiC connection to devices registered to each channe.)

Bluetooth connection method (Mac PC)

1. Clck “System Preferences”> “Bluetooth on your computer.
2. Click “Turn Bluetooth On.”
3. The Bluetooth channel is selected by rotating the “mode switch dial” (CH 1 to 3). (Bue LED binking/ready to pair)
4. Activate the Buetooth function on the device to be connected, and then select “ActtokB-Item No. (B703 or B705)”. (Blue LED lights up)

Bluetooth connection method (Windows 10/11)

Before using this product, make sure your computer is equipped with a built-in Bluetooth receiver. LASYou may not be able to use this product if the Blu you purchase and install a Bluetooth recever after instaliaton is not installed, so it is imperative that

1. Bluetooth receivers appear in the taskbar of your Windows computer when they are connected to the computer via Bluetooth.
2. Hover over the Bluetooth icon and right-click.
3. Cick “Add Bluetooth Device
4. Select the type of device you want to search. (Select “Bluetooth) 5. Rotate the mode switch dial to select the Bluetooth channel (CH 1 to 3). (Blue LED blinking / ready to pair) 6. Activate the Bluetooth function on the device to be connected, and then select “ActtokB – ltem No. (B703 or B705)”. (Blue LED lights up)

How to reset Bluetooth pairing
It is possible to delete all device information connected to CH 1 to 3 by pressing and holding Fn +C for approximately 3 seconds.
Delete the pairing history (forget device and remove the device) from each existing connected device. You must delete the pairing history without disabling the Bluetooth function.

System conversion

Ensure that the keyboard and the device to be used are connected to each other at all times

• Android: Fn +Q
• Windows: Fn +w
• ios, Mac: Fn+E

Some keys may not work depending on the device and system. If the OS connected to each device is different, please use [System Conversion] according to the corresponding OS.

Backlight settings

Status Indicator LED

1. Battery indicator (Over 70% – Green LED, 10-70% – Blue LED, Below 10%- Red LED, Charging-Green LED blinks, When fully charged – Green LED on)
2. Caps Lock indicator (Upon pressing the Caps Lock key. the LED turns on)
3. Num Lock indicator (Press the Num Lock key to tun on the LED)
   Note: The Num Lock feature is not supported on i0S devices, and the LED is not switched on.

18 function keys (12 hot keys)

1. Fn+F1 (screen brightness reduction)

2. Fn+F2 (increased screen brightness

3. Fn+F3 (multitasking)

4. Fn+F4 (Android: Email
   Windows: File Explorer, Mac: Program List)

5. Fn+F5(backight brightness reduction)

6. Fn+F6 (backlight brightness increased)

7. Fn+F7 (previous song)

8. Fn+F8 (play/ pause music)

9. Fn+F9 (next song)

10. Fn+F10 (mute)

11. DFn+F11 (volume-)

12. 12 Fn+F12 (volume +)

13. Fn+PrtSc / PgUp (reduced backlight speed)

14. Fn+Insert/ PgDn (increased backlight speed)

15. Fn+Del (change backight mode – 20 types)

16. Fn+ESC (factory reset)

17. Fn+Win (ock key)

18. Fn+ Back (backlight off
    No 0S support

Note: When using the product, hold down the Fn key and press the corresponding key to use. Performing “System Conversion” according to your device’s operating system is a recommended precaution before using a bluetooth keyboard. Some keys may not work depending on the device and system.

Volume control

Volume control dial make it convenient and easy to adjust the volume.

Power on/off

• Power on: Push the power button to the right to turn on the power
• Power off: Push the power button to the left to turn off the power.

Charging method

1. Connect the supplied USB to C cable to the charging port.
2. Charging starts when the USB port part is connected to the charging adapter.

Note:

• Make sure to check charging voltage before you charge.
• Please use 5V/1A Low power adapter only.
• Do not use 5V/2A-9V/2A High power adapter.

Battery power saving mode

After approximately 5 minutes of inactivity, the device enters sleep mode. You can switch to operating mode automaticaly by pressing any key.

Cautions
Head the product’s user manual caretuly betore using it, Ihe presence of many Bluetooth devices may result in requency contusion,- Make sure the product is not disturbed by other Bluetooth devices. Ihe shats (Switches) of this product are very diticut to exchange.

• Do not aisassemble or assemble arbitrarily. We recommend that you remove the keyboard and keycap with the power off before cleaning. 5)t does not support waterproof or dustproot functions, – Be careful trom contact with water or contamination Such as dust. (6 Can be used at a distance of up to 10 meters. (There may be a disconnection phenomenon occurrence when interterenoe occurs between obstructions and devices using the same trequency band or Wi-F1 SIgnal t you intend to connect

• Bluetooth to a PC throgh a laptopor UsB dongle, you should download and install the latest Bluetooth drver from the manutacturer belore starting the connecton,8Please turn off the power after use. – he battery may run out quickly it the power is not tumed off, 9Use the approved charging cable that came with the product. 9 Do not overcharge for up to 24 hours or more.

• Charging time may vary depending on the charging environment (output). Use while charging is not recommended. ln the event that the batteryy is too hot or too cold, it will shorten our battery’s lifespan and may cause it to become temporarly unresponsive.

• Do not store in places with high temperatures and humicity.
  It may cause a maltunction,

• Be careful not to hurt your hands when opening the package. Injuries may occur to the cut portion,

• To improve performance, specifications may change without notice.

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interferen ce that may cause undesired operation.

FCC ID: 2A3GJ-B703
www.acto.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>