actto ABM-01 Edge Bluetooth Mouse User Manual
- June 4, 2024
- actto
Table of Contents
actto ABM-01 Edge Bluetooth Mouse
LED color
- DPI LED
- 800 DPI: Red
- 1200 DPI: Blue
- 1600 DPI: Green
- Pairing led & operation LED (Blue)
Power saving mode
- Standby mode: enter the computer mode when the mouse does not act
- Sleep mode: switch to sleep mode after entering standby mode for about 1 O minutes
- In standby/sleep mode, dick the mouse button to switch to the operation mode.
Product characteristics
Bluetooth 5.2, unique design of ACTTO, visual pairing with a low-noise optical mouse & operation of LED, power on/off button (power saving function), excellent grip, three-step resolution adjustment (800DPl-1200DPl–1600DPI) with a maximum transmission range of 10 meters, KC-certified products
Product specification
Version Bluetooth 5.2 size 60xl 10×33.5mm weight 57.Sg (excluding batter ) Key
life 3million times resolution 3 stage (800/1200/1600 OP) LEO color dpiled
(red blue green), pairing and operation led (blue) Input power AA battery 1
battery duration 8 hours per day continuous use of reagent for 3 months
(depending on your environment.) Transmission range within 1 Om Power
consumption {operating mode)”‘= 19mA/H, (standby mode) < 2.5-3mA/H, (sleep
mode) < 30-40 µ A/H OS Android 4.2/ios 13/windows 8/mac 103 or later
Product Configuration
Bluetooth optical mouse+ AA Battery+ instruction manual
Matters needing attention
- Please read the instruction manual before using the mouse.
- If there are many Bluetooth devices around, there will be frequency confusion.
- Do not be disturbed by other Bluetooth devices.
- Use the mouse on a monochrome table, and the battery will last longer.
- The mouse cannot work normally in environments:such as tables, glasses and 3D mouse pads with uneven surfaces.
- Please cut off the power supply in order to use the mobile or long-term unused high-efficiency battery
- Please try again after replacing the misoperation battery of the mouse
- Optical sen son: provide optimum performance on precision surfaces without light reflection.
- There is no need to install drivers and utilities separately.
- Do not U”ie in place”i with high temperature, humidity or du”it.
- Prevent the mouse from falling or being impacted strongly.
- Please be careful not to hurt your hands when opening the package.
- The cut part may be injured.
- Do not disassemble at will.
- To improve performance, product specifications may be changed without prior notice.
Note: Hector’s products can be found on our website at www.actto.com. H .. d Office 9 Hector Building, No.355 Road, Shashang Road, S hashang District, Busan Customer consulting room080-302-9981
Battery insertion method
- Please open the battery cover at the bottom of the mouse
- Check the(+,-) positive electrode of an AA battery and insert it correctly.
- After Inserting the battery, close the battery cover. (It turns off completely with a click.)
Bluetooth connection method (Android)
- Press the pairing button at the bottom of the mouse to enter the pairing mode. ( Blue LED)
- Activate the Bluetooth function of the device to be connected.
- Connect “ACTTO BT mouse” and use the mouse.
Bluetooth connection method (Windows)
- Press the pairing button at the bottom of the mouse to enter the pairing mode. ( Blue LED)
- When you connect a Bluetooth receiver to your computer, the Bluetooth icon appears in the window taskbar.
- Right click Add Bluetooth device.
- Select the type of device to scan (select Bluetooth)
- Actto BT Mouse “to connect the device.
- If the words 11Device was ready to use11 appear, click Finish, and then use the mouse.
Bluetooth connection method (iphone/ipad)
- Settings > Easy to Use > Touch > Assist Touch > Activation.
- Select assistive touch> Devices > Bluetooth devices.
- Connect “Actto BT Mouse” on the Blue tooth device, and then use the mouse.
Resolution adjustment method
Press the dpi resolution adjustment button to enter section 800 DPl>1200 DPl>1600 DPI.
- 800 DPI: The cursor moves at a moderate speed.
- 1200 DPl: The cursor moves quickly.
- 1600 DPI: The cursor moves very fast.
Power on/off button
Use the on/off button at the bottom of the mouse to minimize battery power
consumption.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference. and
- this device must accept any interference received, including interference that may cause undesired operation
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and rf not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>