B605 Actto Curved Bluetooth Keyboard User Manual

B605 Actto Curved Bluetooth Keyboard User Manual

Connect up to 5 devices

Through the knob switch mode, you can connect up to five devices. (cable mode

• bluetooth mode (1, 2, 3 channel + 2.4 G)

Cable mode connection method (USB cable) to C

1. The toggle will switch to CABLE model (CABLE) (green LED lights)
2. Use the attached USB cable to connect the keyboard and the to C  Cable port
3. Set after the completion of the direct use of can.

Bluetooth connection method (connection device)

(BT1) connected to the first bluetooth device
&KRRVHRSHQ%OXHWRRWK%7VDLGWKHODPS%OXH/(‘IODVKLQJOLQNUHDG\
7KHOLQNRQWKHPDFKLQHWRRSHQWKHEOXHWRRWKIXQFWLRQFKRRVH$FWWR.%PRGHO%RU%OLQNWRVXFFHVV
(BT2) connected to the second bluetooth devices

1.  Choose open Bluetooth BT2 said the lamp. (Blue LED flashing/link ready
2. The link on the machine to open the bluetooth function, choose ActtoKB – model (B603 or B605), link to success. (BT3) with the bluetooth connection
3. Choose open Bluetooth BT3 said the lamp. (Blue LED flashing/link ready).
4. The link on the machine to open the bluetooth function, choose ActtoKB – model (B603 or B605), link to succes

After the completion of the match, channel light is put ou

According to the latest matching methods] En + (BT1/2/3) key about 3 seconds to another device to match.
Bluetooth channel] [how to change the rotation mode switch knob to change. (to be automatic connection each channel registration device)

Bluetooth connection method (Mac P

1. Click System Preferences on your computer. Blu t oth(Bluetooth).
2.  Click Bluetooth On(Enable Bluetooth).
3.  Select the Bluetooth channel (BT1 to 3) to enter the pairing mode. The blue light is on for 1 second, and the blue light is off for 2 seconds
4. Enable Bluetooth function on connected machine, select ActtoKB- model (B603 or B605), the LED will be off after successful connectio

Bluetooth connection method (Windows 10/11)

Before using this product, please make sure that a computer with a built-in or install the bluetooth receiver. If not install
bluetooth receiver, cannot use, please buy a bluetooth receiver used after installation.

1. when you connect the bluetooth receiver to your computer bluetooth icon will appear in the taskbar when the window.
2. hovering over bluetooth icon, and then click the right mouse button.
3. Click “Add Bluetooth Devices (Add Bluetooth device
4. choose the types of equipment to search. (select “Bluetooth (Bluetooth
5. .select the bluetooth channel (BT1 to 3). (BlueLED flicker/link ready)
6. the link machine open bluetooth function, choose ActtoKB – model (B603 or B605), link to succe

How to initialize the bluetooth pairing

Press Fn + ESC key about 3 seconds, will delete all devices connected to the BT1 / BT2 or BT3 information.
Removed from each existing connection device matching record and delete paired devices (cancelled).
“You must delete history matching, not disable bluetooth function.

System switching method

Input at a time when the keyboard connected to the equipmen

According to different machines and systems, some keys may not be able to work properly.
If the connection to the operating system of the machine, please system into your machine
operating system, and then use.

2.4G connection method：

Insect the dongle to PC USB port,shortly press FN+F4 and choose the channel connection

Power on/off

Open the power supply to slide around the power button to open the power supply Shut down the power button sliding power shut off the power in the middle.

Charging methods,

1. Will the attached toC USB cable connected to the charging port.
2.  Connect the USB port part to charging adapter, you can start charging.

Battery sleep mode

After about 10 minutes of inactivity, into sleep mode. Press any key to automatically enter the operating mode. Matters needing attention

1. before using this product, please be sure to be familiar with the instruction manual before using.

2. if there are a lot of bluetooth devices around, frequency confusion may occur. – avoid by other bluetooth

3.  Please don’t free disassembly and assembly.

4. suggest that in the case of power off keyboards and keyboard, and then clean.

5. does not support waterproof, dustproof function.
   “For interference

6. can be used within 10 meters range. (when the obstacles and machines using the same frequency or 2.4G signal interference occurs, but
   Avoid contact with moisture or dust pollution landowners using laptop and USB converter during a bluetooth connection with PC, please download the latest bluetooth driver from the manufacturer, after installation Can be caton phenomenon. Use.

7. Turn off the power after use. – If the power is not turned off, the battery can drain quickly.

8. Use the authorized charging cable that comes with the product.

9. . At most Charging time will vary depending on the charging environment (output). It is not recommended to use while charging. 24 hours.
   Do not store it in a hot and humid place. A fault may occur product specifications are subject to change without prior notice.

10. If the temperature of the battery is too high or too low, it may cause the battery to shrink, shorten the battery life, and temporarily stop working. Be careful not to hurt your hand when you open the package. I

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>