LIVING basics LB-TB-518 3-in-1 Cute Folding Baby High Chair Instruction Manual

June 3, 2024
LIVING basics

LIVING-basics-LOGO

LIVING basics LB-TB-518 3-in-1 Cute Folding Baby High Chair

LIVING-basics-LB-TB-518-3-in-1-Cute-Folding-Baby-High-Chair-
PRODUCT

BOOSTER SEAT

LIVING-basics-LB-TB-518-3-in-1-Cute-Folding-Baby-High-Chair-
FIG1

  1. Fetch the seat and place on a flat chair.
  2. fasten the belt on the bottom, and keep it tight.
  3. then tie the back belt, also keep it tight.
  4. Tie the safe belt after the child sit well, and adjust the length according to the child. If needed, install the tray the same as the high chair.

CAUTION: YOU CANNOT ALLOW THE CHILD USE THE CHAIR WITHOUT A SUPERVISOR!

HIGH CHAIR MANUAL

LIVING-basics-LB-TB-518-3-in-1-Cute-Folding-Baby-High-Chair-
FIG3

  1. Fetch the seat and put the plate upside, and check the chair whether missing any parts.
  2. High chairs need 8 pcs legs, 4 pcs upper, and 4pcs under. The one that has two different diameter heads is under leg.
  3. Put the upper legs into the plastic chair, the snap spring pop-up means install well, see the picture.LIVING-basics-LB-TB-518-3-in-1-Cute-Folding-Baby-High-Chair-FIG4
  4. After installing the upper legs, then install the suits for footrests in the front legs, The suits have left and right ones. If using the small chair, fetch the anti-mats and install them on the upper legs.
  5. Install the under legs, the snap spring needs pop up.LIVING-basics-LB-TB-518-3-in-1-Cute-Folding-Baby-High-Chair-FIG5
  6. Place the footrest on the suits. Using the screws to fasten it.
  7. Open the chair’s backrest, push it back and you will hear a “Ka” voice then it’s well. Fold the chair need put the two white buttons together when don’t use it.
  8. Install the dining plate. The plate needs two button points connected with the chair on each side at least, to fasten it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals