realme RMA2120 Buds Air 5 Pro Truly Wireless In Ear Earbuds User Guide
- June 13, 2024
- realme
Table of Contents
- realme RMA2120 Buds Air 5 Pro Truly Wireless In Ear Earbuds
- Product Information
- Product Usage Instructions
- Enter pairing mode
- Connect earphones
- Wear earphones
- Touch controls
- realme Link
- Overview and packing list
- Packing List
- Basic Parameters
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
realme RMA2120 Buds Air 5 Pro Truly Wireless In Ear Earbuds
Product Information
- Product Name : realme Buds Air 5 Pro
- Product Model: RMA2120
- Bluetooth Version: Bluetooth 5.3
- Bluetooth Protocol: HFP/A2DP/AVRCP
- Bluetooth Codecs: SBC, AAC, LDAC
- Charging Interface: Type-C
- Music Battery Life (Normal Mode): Approximately 10 hours (earbuds)
- Battery Life with Charging Case: Approximately 40 hours
- Charging Time: Approximately 2 hours and 10 minutes
- Bluetooth Communication Distance: Up to 10 meters
- Working Frequency: 2402~2480 MHz
- Max Power Rate: Not specified
Product Usage Instructions
- Enter pairing mode: Press and hold the function key for 3 seconds to enter pairing mode.
- Connect earphones:
- Connect to a realme phone: Turn on the Bluetooth on your phone. Open the headset charging box and place it close to the phone. Follow the personalized pop-up instructions on the screen to complete the connection.
- Connect to a phone of another brand: Turn on the Bluetooth on your phone. Open the headset charging box and place it close to the phone. Then, enter the Bluetooth settings of your mobile phone, search for and connect to “realme Buds Air 5 Pro”.
- Restore factory settings: Put the headset in the charging box and open the box cover. Press and hold the function key for 10 seconds until the indicator light flashes alternately in white and green. The headset will then return to factory settings.
- Wear earphones: Choose the most appropriate ear tips size (M is installed by default). Available sizes are S, M, and L.
- Touch controls:
- Touch twice to play or pause music, answer or end a call.
- Touch three times to skip forward.
- Press and hold for 2 seconds on either side to switch noise control modes or decline an incoming call.
- realme Link: For more functions, please use the realme Link App.
- Earbud fit test: Choose ear tips that make a good seal with your ear canals for better sound effect.
Overview and Packing List
- Packing List:
- Earphone x 1
- User Guide x 1
- Indicator (open cover without charging):
- 20% – The green light stays on for 3 seconds
- 20% – The red light stays on for 3 seconds
- Ear tips (M installed by default) x 6
- Type-C charging cable x 1
Enter pairing mode
Press and hold 3 seconds for pairing.
Connect earphones
Connect phone of realme
Turn on the Bluetooth on phone.
Open the headset charging box, put it close to the phone, then follow the
personalized pop-up instructions on the screen to operate.
Connect phone of other brand
Turn on the Bluetooth on phone. Open the headset charging box, put it close to
the phone. Then enter Bluetooth settings of mobile phone, search and connect:
realme Buds Air 5 Pro
Restore factory settings
Put the headset in the charging box and open the box cover, press and hold the
function key for 10 seconds until the indicator light flashes alternately in
white and green ,the headset then returns to factory settings.
Wear earphones
You can choose the most appropriate ear tips size. (M installed by default)
Touch controls
Touch twice to play or pause music, answer or end a call
Touch three times to skip forward
Press and hold 2 seconds on either side to switch noise control modes, decline an incoming call
realme Link
Overview and packing list
Packing List
- Earphone x 1
- User Guide x 1
- Ear tips ( M installed by default) x 6
- Type-C charging cable x 1
Basic Parameters
Product name | realme Buds Air 5 Pro |
---|---|
Product model | RMA2120 |
Bluetooth version | Bluetooth 5.3 |
Bluetooth protocol | HFP/A2DP/AVRCP |
Bluetooth code | SBC , AAC , LDAC |
Charging interface | Type-C |
music battery life (normal mode) | About 10h (earbuds) |
About 40h (use with charging case)
Machine charging time| About 2h
Bluetooth communication distance| ≤10m
Working frequency| 2402~2480 MHz
Max power rate| <15 dBm
Warning
- Don’t place the product into a liquid environment or avoid the product exposed to high humidity.
- Avoid extrusion to avert the damage to the product.
- Don’t attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if stored for a long time.
- Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized.
- Avoid the dusty, wet and dirty environment where the electronic circuit of the equipment may be damaged if being used.
- Don’t use the equipment at the moment of thunderstorm because the thunderstorm may incur equipment fault or shock hazard.
- Don’t use the equipment when riding a motorcycle or a bicycle, driving a car or crossing the road to ensure your safety.
- Keep the equipment out of reach of children or pets to avert the damage.
- Don’t wash the equipment with chemical, cleanser or strong detergent.
Don’t listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used.
EU Declaration of Conformity (DoC)
Hereby, Realme Chongqing Mobile Telecommunications Corp., Ltd. declares that
this earphone is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.realme.com/global/support/eu-declaration.
Battery warning
The built-in lithium battery of the product is forbidden to be disassembled,
impacted, extruded or put into fire. The battery under the very low air
pressure may result in explosion or flammable liquid or gas leakage. Avoid the
battery in a high-temperature environment or being exposed to strong sunlight
to avert explosion. Don’t use the battery continuously in case of serious
ballooning. The battery shall be handled pursuant to the local regulations and
shall not be disposed as household garbage. Don’t try to repair, remove or
refit the battery. The explosion may happen if the battery is replaced by the
one subject to incorrect model. Don’t compress or puncture the battery with
hard object. The battery leakage, overheating or outbreak of a fire may occur
if the battery is destroyed.
Waste Electrical and Electronic Equipment (WEEE)
This symbol (with or without a solid bar) means that according to local laws
and regulations your product and/or its battery shall be disposed of
separately from household waste. When this product reaches its end of life,
user has the choice to give his product to a competent recycling organization.
Proper recycling of your product will protect human health and the
environment.
- realme will seek shared responsibility and cooperation from customers in reducing the environmental impact of their products.
- realme will comply with all the applicable laws related to WEEE Management.
Reduction of hazardous substances
This device and any electrical accessories are compliant with local applicable
rules on the restriction of the use of certain hazardous substances in
electrical and electronic equipment, such as EU REACH, RoHS and Batteries
(where included) regulations, etc.
For declarations of conformity about REACH and RoHS, please visit our website
https://www.realme.com/eu/support/declaration.
Product Warranty Information
I. Service Terms
Thank you for using the realme earphone. We provide our product with
comprehensive warranty services in accordance with applicable national laws
and regulations. In the event of any conflict between the following policies
and national policies or commissions, the national policies shall prevail.
1. It is very important that you fill out the earphone warranty card
completely, correctly and faithfully, or else ask the seller to issue an
invoice or purchase ticket so that you can keep it in a safe place.
- Valid invoice or sales receipt: the invoice should indicate the serial number of the earphone, factory serial number (lot number) of the accessories (battery and charger), the model, the date of sale, the seller’s stamp, the amount, etc.
- The warranty card and valid purchase receipt or invoice is essential to protect your warranty rights. The information filled out on the warranty card must be complete, truthful and correct with no modifications. If you lose the warranty card and/or valid invoice or purchase ticket and cannot provide us with a photocopy of the same, we will provide you with a warranty service from the date of activation of your earphone or from the 90th day after the date of manufacture of your earphone.
- Our warranty does not cover other product accessories (e.g. user manual, warranty card, etc.).
- If the product is under warranty, you hereby agree to transfer the ownership of replaced defective parts and such parts shall automatically become the property of realme.
- Before warranty service is provided, you must take the following steps:
- Follow the service request procedures specified by service provider.
- Back up data and remove any confidential and/or personal information from the product. realme is not responsible for damage or loss of any program, data, or removable storage media.
- Remove all feature, parts, options, alterations, and attachments not covered by the warranty.
- No Dealer/Distributor/Retailer has authority to vary the terms of above warranty.
Notice: The above warranty is only valid for products sold in this country, realme has the power to conduct a final review and interpretation of the warranty policy.
This warranty does not cover the following cases:
- Warranty is expired.
- Without warranty card or purchase invoice, any alter on the warranty card or purchase invoice.
- Unauthorized modifications, repairs or installation conducted by unauthorized persons.
- Loss of, or damage to, your data by the product.
- Problems and malfunctions caused by the user’s self-installing software and improper settings. Failure or damages resulting from misuse, abuse, accident, modification, unsuitable physical or operating environment, power surges, improper maintenance, or use not in accordance with product information materials.
- Damage due to incorrect installation or incorrect connection with peripheral devices (such as monitors, keyboards, etc.)
- Damage due to improper care (accident, misuse or negligence), exposure to water/liquids and damage caused by acts of god such as floods, fires or earthquakes.
- Damage to the product caused by third party software or virus, or there is software loss or data loss that may occur during repair or replacement.
- Products not purchased from realme authorized sellers (we recommend that you contact the point of sale for support). realme reserves the right to interpret the provisions in this warranty information.
The information in this warranty card may change without prior notice. Please visit the realme support site at https://www.realme.com/eu/legal/warranty- terms for current and complete warranty information.
Service contact:
Email: service.eu@realme.com
Website: www.realme.com
FCC statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over gram of tissue. Device
types RMA2120
(FCC ID: 2AUYFRMA2120) has also been tested against this SAR limit.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this equipment.
Such modifications or changes could void the user’s authority to operate the
equipment.
Warranty Card (Stub Copy)
Dear user, thank you for using the product of our company. Please read and
keep properly the warranty card after purchasing the product so that we can
provide better services to you.
- User Information
- User’s name
- Phone Number
- Address
- Product Information
- Product Model
- Product Serial Number
- Sales Information
- Purchase Date
- Invoice Number
- Sales Unit
- Phone Number
- Address
Warranty Card (Customer Copy)
Dear user, thank you for using the product of our company. Please read and
keep properly the warranty card after purchasing the product so that we can
provide better services to you.
- User Information
- User’s name
- Phone Number
- Address
- Product Information
- Product Model
- Product Serial Number
- Sales Information
- Purchase Date
- Invoice Number
- Sales Unit
- Phone Number
- Address
References
- realme (Global) - Make it real
- Warranty Policy - realme (Europe)
- realme EU Declaration - realme (Europe)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>