TRIM-TEX Medium Chamfer Bead Splayed Installation Guide
- June 11, 2024
- TRIM-TEX
Table of Contents
TRIM-TEX Medium Chamfer Bead Splayed
Product Information
The Medium Chamfer Bead is a popular style among architects, finishers, and interior designers. It is designed to give your corners a modern look with crisp lines and stark shadows. This splayed version of the bead is a stylish choice for finishing off-angles, fitting a standard 135-degree outside corner.
Setback : Medium Chamfer
Scan Below for Installation Video
Technical Specs:
- Material: PVC
- Length: 8 feet
- Width: 1 1/4 inches
- Thickness: 1/16 inch
Product Usage Instructions
- Step 1: Before Installation, coat both the bead and edge of drywall with Trim-Tex 847 Spray Adhesive.
- Step 2: Press the bead in place, applying pressure to the mud legs.
- Step 3: Finish with drywall compound.
- Step 4: Sand and paint the finished surface as desired.
Note : For best results, use Trim-Tex brand drywall compound and sanding products.
Watch the installation video below for additional guidance: If you have any questions or concerns regarding the installation process, please contact our customer service team for assistance.
Medium Chamfer
Bead® Splayed
A popular style among architects, finishers and interior designers alike,
Medium Chamfer Bead gives your corners a modern look with crisp lines and
stark shadows. This splayed version of the bead is a stylish choice for
finishing ff-angles, fitting a standard 135-degree outside corner.
Installation Guide
Before Installation:
Measure, cut, and dry fit the bead, leaving a ½” gap at the floor.
- Step 1: Coat both the bead and edge of drywall with Trim-Tex 847 Spray Adhesive.
- Step 2: Press the bead in place, applying pressure to the mud legs.
- Step 3: Staple every 6”-8” using ½” staples.
- Step 4: Finish with drywall compound.
3700 W Pratt Avenue, Lincolnwood, IL 60712 • 800-874-2333 • trim-tex.com