amazon basics 36-68 1 Inch Curtain Rod with Cap Finials Instruction Manual
- June 17, 2024
- amazon basics
Table of Contents
amazon basics 36-68 1 Inch Curtain Rod with Cap Finials
Specifications
Important Information
- Read these important safety instructions carefully before using and keep them for future reference.
- If you are unsure of any part of the process, contact a professional or retailer for assistance. Improper installation can result in injury or damage.
- Examine the wall you want to install the rod on to be sure it can hold the weight and is suitable for this type of hardware.
- Ensure that no pipes, wires or other objects are hidden in the wall that may be punctured during installation.
- Make sure that the installation site only uses the tools listed below and that the wall can hold the corresponding screws and plugs.
- Ensure to tighten screws and nuts correctly but do not over-tighten them.
Installation Diagrams Description
The diagrams show the process for installing a single long curtain rod on a wall.
- Measure the desired location on the wall and mark it with a pencil (X for height, Y for width).
- Identify the required components for installation: 6 wall brackets (A), 6 screws (B), 3 drywall anchors (C), 2 end caps (D), and 2 holdbacks (E).
- Drill holes where marked, insert drywall anchors if necessary, and screw the brackets into place.
- Connect the rod to the brackets ensuring the rod is level and secure the set screws.
- Slide the curtains onto the rod and place the end caps on the ends of the rod.
- Attach the holdbacks to the wall below the rod as shown in the diagram, if included.
Required tools: level, drill, 1/4″ drill bit, screwdriver, and a pencil.
Dimension
Care Instructions
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents, or polishes.
FAQ
- What if I encounter a hidden pipe or wire during installation?
- Stop the installation process and consult a professional to avoid damage or injury.
- How much weight can the rod hold?
- The rod is designed to support up to 22 lbs (10 kg).
- Can I install the rod on any type of wall?
- Ensure the wall is suitable for the hardware and can support the weight of the rod and curtains.
- What should I do if I over-tighten a screw or nut?
- Loosen it slightly to avoid damaging the hardware or wall. If damage occurs, seek professional help.
- Are the installation tools included?
- No, you will need to provide your own level, drill, 1/4″ drill bit, screwdriver, and pencil.
Installation Instruction
- https://www.amazon.co.jp
- amazon.com/AmazonBasics
- 36-72, 48-84, 48-88 IN
- (91-182, 122-213, 122-224 cm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>