LECTRON V2L Adapter User Manual
- June 3, 2024
- LECTRON
Table of Contents
LECTRON V2L Adapter
About the V2L Adapter
The Lectron V2L (Vehicle-To-Load) Adapter converts your EV charger port into a standard AC outlet (US), so you can use your EV to power your electronic devices, lights, appliances and more.
In the Box
Compatibility
Hyundai Ioniq 5 (2022 and 2023)
Introduction to Parts
- Standard AC outlet (US)
- J1772 plug
Warnings: Do not use in wet conditions, such as rain or snow.
How to Use
- Firmly plug the adapter into the J1772 charger port.
Note: The adapter must be plugged in within 1 minute of opening the charger door. Once it’s plugged in, the adapter will automatically lock to prevent theft.
-
Open the hatch at the back of the adapter and plug the electric cord into the AC outlet.
-
When finished, unplug the electric cord from the adapter.
-
Press the ‘unlock’ button on the vehicle door to unlock the adapter. Then, press the button on the top of the adapter and pull it out.
Troubleshooting
-
Why won’t the adapter power my device?
Make sure both the adapter and the electric cord are firmly plugged in. -
Why did my adapter suddenly stop during use?
It could be an overload or a low EV battery. Check your EV.
Specifications
- Compatibility: J1772
- Outlet: NEMA 5-15 (AC)
- Current: 15A Max
- Contact resistance: 0.5 m Ω Max
- Weight: 10.6 oz
- Dimensions: 8.1 x 2.9 x 2.1 in
Get More Support
Scan the QR code below or email us at: [email protected].