PYDEEN CM-AHD1 AHD Backup Camera Owner’s Manual
- June 3, 2024
- PYDEEN
Table of Contents
Owner’s Manual
CM-AHD1 AHD Backup Camera
Included Items
| AHD Backup Camera
---|---
| AHD Camera Extension Cable
| Allen Key
Specifications
| Model | CM-AHD1 |
|---|---|
| Sensor | SONY IMX307-LQR |
| Resolution | 1920*1080 |
| Frames | 30fps |
| Min Illumination | 0.1 Lux |
| Viewing Angle | D 140°, H 118°, V 61.5°(±5°) |
| Power Voltage | 5V |
| Video Output Signal | AHD |
| Image | Mirror Image(default) |
| Camera Lens Construction | 2G4P+1IR |
| Water Proof | IP67 |
| Operation Temperature | -20°C ni +80°C |
| Storage Temperature | -30°C r‘i +85°C |
Product Introduction
Thank you for purchasing the Rydeen CM-AHD1. The CM-AHD1 is a high definition backup camera which is compatible with the following Rydeen rear view mirrors ( TOMBO 360, TOMBO 360X, 360 VIEW, SM1 & DC1).
Installation of Camera Brackets
The CM-AHD1 can be mounted using any of the following methods. Choose the
configuration that best suits your vehicle.
Use Wing Mount attached on camera (pre-installed)
Camera Installation Position Option
Rear windshield mounting location (Interior Top Mounted)
Above license plate mounting location (Exterior Mounted)
Electrical Connection
Note: The mirror should be the Rydeen products, please contact RYDEEN Technical Support for more details.
One Year Limited Warranty
RYDEEN MOBILE (a manufacturer of “RYDEEN” products) warrants products (CM-
AHD1) only to the original purchaser as described following:
Warranty Period
Rydeen warrants this product for a period of one (1) year from the original
purchase date.
Warranty Coverage
This warranty covers all defects in material and workmanship except as
specified below.
- Any products distributed outside of the USA by Rydeen North America, Inc. (Rydeen) or which is not purchased in the USA or Canada unless the product is purchased through the USA Military Exchange Service.
- Any product(s) which are purchased from an unauthorized retailer (in store or online).
- Any products in which the serial number label or the model number label are removed, torn, modified or replicated.
- Any damage defects or malfunctions resulting from any of following:
a) When defect occurs during shipment of product (freight carrier’s responsibility).
b) Installation or removal of product.
c) Accidents, act of nature, misuse, abuse, neglect, unauthorized product modification or failure to follow product owner’s manual instructions.
d) Any repair or attempt to repair without RYDEEN authorization.
e) Any other cause which is not related to product defect.
f) Any cosmetic damages due to normal wear and tear.
g) Any consumable items (such as fuse or batteries).
If any problems develop with your Rydeen products during or after the Limited Warranty Period, or if you have any questions regarding the operation or installation of the product, you should contact your Rydeen retailer. If the problem or your question is not handled to your satisfaction, please contact Rydeen Customer Service Department at 1-877-777-8811 (within the USA only) Monday-Friday between 9:00 AM to 4:00 PM Pacific Standard Time or visit_ www.rydeenmobile.com.
Technical Support Contact Info
For any questions about CM-AHD1, please contact your retailer or RYDEEN Technical Support:
- Phone: 1-877-777-8811 (within USA only) or 1-310-787-7880
- Email: [email protected]
- Web: https://rydeenmobile.com/contact-support/