GAIZERL AS10P1 Solar Fountain with 2000mAh Battery User Manual

May 15, 2024
GAIZERL

GAIZERL AS10P1 Solar Fountain with 2000mAh Battery

GAIZERL AS10P1 Solar Fountain with 2000mAh Battery

Thank you

Thank you for purchasing this solar fountain. Please read the product manual before using this product.

Product Specifications

Product Name Solar Fountain
Size of Solar Panel 7.3*4.9 inch
Power of Solar Panel 3.5W
Voltage of Solar Panel 7V
Battery Capacity 2000mAh
Quantity of LED Light 6
Cord Length 16.4ft

Product Diagram

Parts Name Quantity
A Solar panel 1
B 81 Nozzle 1
82 Nozzle 2 1
83 Nozzle 3 1
84 Nozzle 4 1
85 Nozzle 5 1
86 Nozzle 6 1
87 Nozzle 7 1
88 Connection pipe 1
C Water pump 1
D Ground stake 1
E Filter sponge 3

Product Diagram

Install Instructions

Step 1: Assemble the connecting pipe B8 with the nozzles B5, B6 or B7 into F (as shown in fig.1)
install Instructions

Step 2: Insert the nozzles B1, B2, B3, B4 or F in to the solar fountain. (as shown in fig.2)
Install Instructions

Step 3: Insert D into A to install the ground stake and solar panel. (as shown in fig.3)

Install Instructions

Step 4 : Connect the end of the water pump power cable to the solar panel power cable, and screw it firmly. (as shown in fig.4)
Install Instructions

Step 5: Insert the stake in ground, and adjust the solar panel angle, so that the solar panel under direct sunlight. (as shown in fig.5)
Install Instructions

Step 6: Take enough water in bird bath to make sure the water pump is fully submerged. The fountain will spay water automatically.

Note: There are two ways to install the solar panel: vertical direction and horizontal direction.(as shown in fig.6)
Install Instructions

Product Features

  1. During the day, the fountain will spray water and store power. The height of the spraying water will change with the intensity of sunlight.

  2. The fountain can work at cloudy days (The battery power will be enabled and the working time depends on the power stored in the battery).

  3. At night, the fountain will light up and spay water, and the spray height will remain constant until the battery runs out.

  4. The solar panel angle is adjustable. You can turn the nut to adjust the solar panel angle to appropriate angle.
    Product Features

  5. The product has a water shortage protection function.
    When the water of the birth bath runs low, the pump and LED light will stop working automatically.

  6. Here are are seven spraying patterns:
    Product Features

Notes:

  1. Don’t cover the solar panel with any sundries or shade

  2. Keep the bird bath have enough water so that the pump can be submerged.
    Product Features

  3. Insert the stake in ground firmly to avoid skewing.

  4. When the product is used for the first time at night or the product is out of the water for more than 4 hours at night, it is necessary to use strong light to irradiate the solar panel for more than 30s, then wait for 1 minute, the fountain will work.

  5. Please change water, clean rotor and filter sponge regularly in case of any blocking. (as shown in the fig.7)
    Product Features

Steps to Clean the Rotor:

Step 1 : Take out the water pump and take off the lamp base
Step 2 : Remove the front cover
Step 3: Clean the filter sponge and rotor
Step 4 : Reassemble the fountain

FAQ

Q: Why does the fountain stop working in the day? A: Two reasons may cause the fountain to stop working: The wire connector is loose. The pump is blocked by sundries. Please screw the wire connector firmly and clean the filter sponge and rotor regularly. Q: Why don't the LED lights come on at night? A: Two reasons may cause the problem: The led light is broken There isn't enough battery Please feel free to contact us to get help, and you can also try to take the fountain out of water and put it under direct sunlight in the day, and use it at night to check whether the light can work or not. Q: Why does the water sprayed from high to low? A: Please check if there is debris blocking the water pump or any cover on the solar panel.

A: Two reasons may cause the fountain to stop working: 1.The wire connector is loose. 2.The pump is blocked by sundries. Please screw the wire connector firmly and clean the filter sponge and rotor regularly

Q: Why don't the LED lights come on at night?

A: Two reasons may cause the problem: 1. The led light is broken 2. There isn't enough battery Please feel free to contact us to get help, and you can also try to take the fountain out of water and put it under direct sunlight in the day, and use it at night to check whether the light can work or not.

Q: Why does the water sprayed from high to low?

A: Please check if there is debris blocking the water pump or any cover on the solar panel.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals