Clarke SMD4500 LED 50W Foldable Work Light Instruction Manual

Clarke SMD4500 LED 50W Foldable Work Light Instruction Manual

INTRODUCTION

Thank you for purchasing this CLARKE Worklight.

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.

TECHNICAL INFORMATION

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights.

SAFETY PRECAUTIONS

1. This work light must never be immersed in water.
2. DO NOT look directly into the lamp when switched on as this can harm the eyes.
3. If used with an extension cable always ensure that the extension cable is fully unwound.
4. DO NOT use this work light if it has a broken lens, casing or damaged cable
5. ALWAYS unplug the work light before moving it or performing maintenance. Do not touch the lamp when your hands are wet.
6. DO NOT attempt to disassemble or repair the work light.
7. ALWAYS unplug the work light when it is not in use.
8. NEVER unplug the worklight by pulling the cable, always hold the plug.
9. NEVER use the worklight if the cable or plug are damaged.
10. ALWAYS stand on firm, level ground.
11. DO NOT cover the lamp or place combustible materials on top of the work light.
12. DO NOT place within 1m of combustible materials.

SAFETY SYMBOLS

The following symbols appear on the unit.

Read the manual before use

Do not cover

Protect from rain/water

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general household waste but according to the laws governing Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.

ELECTRICAL CONNECTIONS

  WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY.

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved 13 amp BS 1363 plug, or a suitably fused isolator switch. If the plug has to be changed because it is not suitable for your socket, or because of damage, it must be removed and a replacement fitted, following the wiring instructions shown below. The old plug must be discarded safely, as insertion into a power socket could cause an electrical hazard.

  WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: BLUE = NEUTRAL BROWN = LIVE YELLOW AND GREEN = EARTH.

If the colors of the wires in the power cable do not agree with the markings on the plug.

• The BLUE wire must be connected to the terminal which is marked N or coloured black.
• The BROWN wire must be connected to the terminal which is marked L or coloured red.
• The YELLOW AND GREEN wire must be connected to the terminal which is marked E or or coloured green.

Plug must be BS1363/A approved.

Ensure that the outer sheath of the cable is firmly held by the clamp.

We strongly recommend that this product is connected to the mains supply through a Residual Current Device (RCD).
If you are not sure, consult a qualified electrician.

OPERATION

1. The light has four adjustment positions, each at 45o and can be positioned to direct the light as required.
2. Only use extension leads that are of an appropriate power rating and suitable for the work environment. Inspect the extension lead regularly and replace if damaged.
3. Before working with the work light, check that the voltage shown on the light’s model plate is the same as the mains voltage being used.
4. Plug the work light into a grounded electrical outlet.
5. Position the work light near the work. Adjust to direct the light beam.

CARE & STORAGE

1. When not in use, switch off & unplug from the power supply.
2. Store this work light folded flat in a secure, dry place, out of the reach of children. DO NOT leave it exposed to the elements and avoid direct sunlight, direct heat, rain/moisture etc.
3. Keep the external surfaces clean. Avoid impact damage & DO NOT allow the work light to come into contact with abrasive or corrosive materials.
4. DO NOT use solvents, thinners or alcohol for cleaning as these will damage the finish. With the worklight unplugged from the power supply, use a dry cloth to wipe over the components.The LED light source cannot be replaced but has a life expectancy of approximately 30,000 hours.
5. NEVER use unauthorised accessories or attachments which can cause personal injury or damage to the product.
6. DO NOT attempt to replace or change or the LEDs if the protective glass is cracked or broken it must be replaced before the work light is used again.
7. DO NOT attempt to repair or modify this product or attempt any electrical repair yourself. Consult the CLARKE Service Department.

COMPONENT PARTS

DECLARATIONS OF CONFORMITY

PARTS & SERVICE

0208 988 7400
Parts Enquiries
Parts@clarkeinternational.com
Servicing & Technical Enquiries
Service@clarkeinternational.com
SALES: UK 01992 565333 or Export 00 44 (0)1992 565335
Clarke INTERNATIONAL Hemnall Street, Epping, Essex CM16 4LG www.clarkeinternational.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>