CAMMHD DSJ-E3 1080P Full HD Portable Body Camera Instruction Manual
- June 15, 2024
- CAMMHD
Table of Contents
Mini Portable Camera
DSJ-E3 Product Manual
VER1.0 A
Prompt before use
This is a camera with a built-in lithium battery.
Before first use, charge the camera, about an hour.
Note:
Please use our company’s data cable for charging first, although other data
cables can also be charged, you may face a situation where the red light does
not turn off after the product is completely charge.
This product supports recording while charging.
Charging status: red light is always on.
Fully charged state: red light is off.
Charging indicator: the red light is always on– loading-
Charging indicator: the red light is off, the light blue is on- full charge–
Format micro TF card
If you want to format the memory card, please read the memory card with a
card reader on the computer, click the removable disk, format, and then format
the memory card to FAT32-32KB.
- The camera can support up to 64GB TF memory card.
- If it is less than 64G, format it on the computer directly, if it is more than 64G, you need to download third-party software and format it as “FAT32-32KB”.
Make use of suggestions
- Description of function keys
| 
---|--- - Install the micro TF card
Simple operation: the text on the memory card faces the back of the product, insert it directly into the card slot and press it with your finger. - How to use the product
The main function:
a.Video recording
b. Individual registration
c. photograph
d. motion detection
e. Hidden light
Record mode indicator: blue;
While recording: the blue light flashes slowly;
Record mode indicator: yellow; recording: yellow light flashes slowly;
Photo mode indicator: yellow; during the photo: the yellow light flashes for 5 seconds.
a. Use the “Video” function:
Long press the “Start / Video button” for 2 seconds to turn on, short press the “Start / Video button”, the blue light flashes slowly to start recording; Short press the “Start / Video button” again to stop recording, the blue light will stay on.
The video file is automatically saved in sections, 5 minutes during a period; If you need to turn off, please press and hold the power button to turn off.
b. Use the “One-time
registration” function:
Long press “Start / Video button” for 2 seconds to power on, short press “record button”, yellow light flash slowly to start recording; Short press the “record button” again to stop recording, the blue light will stay on.
Separate recording files are automatically saved in sections, one section per hour;
If you need to turn off, please press and hold the power button to turn off.
c. Use the “photography” function
：
Long press “Power / Video Key” for 2 seconds to turn on the phone, short press “Photography” button to start taking photos. The yellow light will flash after 5 seconds to complete the photo; the blue light will stay on.
The taken photo is automatically saved, short press to take one photo at a time.
d. Use the “motion detection” function:
Press and hold the “power / video button” for 2 seconds to turn on, and hold the “photography button” for 3 seconds. The blue light flashes slowly and the file continues to record for one minute. When there is an object passing near the camera, it will continue to record; When there is no passing object, the camera will be at 1 The video will stop after 5 minutes, and the blue light will stay on.
e. Use the “hide indicator light”
function:
When the camera is working, if you need to turn off the blinking light, press and hold for 3 seconds.
The “record button” indicator goes out; If you need to turn on the flashing light, press and hold again for 3 seconds; The “record button” can turn the flashing indicator back on; this operation will not affect the working state of the camera in operation.
Advice:
- When the battery is too low, the indicator light will flash quickly, it will automatically stop recording or recording, automatically save the file, and turn off.
- There is no card when booting up, the blue light will keep blinking.
- The machine will automatically turn off after 3 minutes of inactivity (no recording / recording state).
Product description
a. Camera reset operation:
When the camera is frozen and cannot be turned off.
As shown in the figure: Press the needle vertically and press the reset button
into the reset hole to complete the forced shutdown.
b. Overview of camera functions
This product has strong absorption of iron, can be adsorbed and fixed on iron
objects, and has clip function.
Camera time and resolution settings
Please insert the camera into the TF card and connect it to the computer via
the data cable. After about 8 seconds, after the computer recognizes the
removable disk, click to open the removable disk;
Edit and rename the file name “Settime” to “settings”. After deleting the
contents of the file, enter the Arabic numerals “zero spaces one space one”
(011) to save the text file and exit. Register the camera again to finish
Settings, the “Settings” text document will disappear. This product default
setting 011
When the first number is set to 0, the resolution of the video file is 1280
720 and the number of frames is 30.
When the first number is set to 1, the resolution of the video file is 1920
1080 and the number of frames is 30.
When the second number is set to 0, the loop recording function is disabled.
When the TF card recording files are full, the machine will stop recording.
When the second number is set to 1, turn on the loop recording function. Once
the TF card recording files are full, the new recording file will overwrite
the original recording file and the machine will continue recording.
When the third number is set to 0, the recording video does not display the
recording time watermark.
The third number is set to 1: The year / month / day of the recording video
display time: minute: second:
About the time watermark setting method:
Connect your computer and camera with the data cable, open the “settime” text
file, it will show 2018042118:28:08 after opening;
If you need to set 23:59:59 on 24 December 2020, please edit the number and
save the text file. After disconnecting from the computer and re-recording,
the time watermark will show the modified time.
Once the camera is powered off, the time watermark will automatically change
back to the default time. If you need the time watermark, it is recommended to
change the time before using it.
Product parameters
| Photo format: | JPG |
|---|---|
| Recording mode: | WAV |
| Video format: | AVI |
| Image encoding: | M-JPEG |
| Image ratio: | 0.672916667 |
| Playback software: | The operating system comes with a consumer audio and video |
player
Video resolution:| 1080P@ 30fps, 720P CO 3ofps
Support system:| Windows XP / 7Nsta / 8/10; Mac os x10.4 or higher; Linux
Battery type:| high capacity lithium polymer battery, capacity 560 mAh
Charging voltage:| DC-5V = 500mA
Light source frequency:| 50Hz / 60Hz
Interface support:| Micro USB 5 pin
Charging time:| About 1 hour
Video working time:| about 3 hours
Recording working time:| about 7 hours
Product size:| 32X28X91 (mm)
Product weight:| about 348g
Storage support:| Maximum support 64G TF card
Safety tips
Please follow the following basic safety precautions when using your device.
-
This product uses lithium batteries. Please avoid direct sunlight for a long time when using this product.
The high temperature radiant heat source is not suitable for use in high humidity and dusty environment during the delivery period. -
Please charge the product before using the product if it is stored for a long time.
-
Do not disassemble the machine or repair it by yourself.
Nanjing AiCheWu Intelligent Technology co.,Ltd
Address: Dongheng Building, Shuanglong Road, Jiangning
District，Nanjing City, Jiangsu Province, China
Email:[email protected]