F F SHUTTER Wi-STR1S2-P Blinds Controller 230 V User Manual

June 9, 2024
F F

F F SHUTTER Wi-STR1S2-P Blinds Controller 230 V

System Capabilities

  • Communication via home Wi-Fi network;
  • Remote access to devices via the Polish F&F cloud;
  • Integration with Google and Google Home voice assistant;
  • Ability to work autonomously, without a Wi-Fi connection;
  • Advanced programmable timers based on online calendars and enhanced with astronomical functions;
  • Free mobile applications for Android and iOS.

Properties

  • Control of a single roller shutter with a 230 V AC motor with a load of up to 320 W;
  • Ability of local connection of one or two buttons for direct con-trol of the roller shutter operation;
  • Controlling the level of the roller shutter opening and ability to control the degree of the slat tilt;
  • Set the desired level of roller shutter opening and slat tilt using the mobile app and time programmers;
  • Built-in clock with power backup and backup copy of the work program guarantees proper operation also without a Wi-Fi connection;
  • REST API support enabling integration of the controller also with other home automation systems;
  • Electric protection of the roller shutter motor;
  • Built-in thermal protection;
  • Convenient installation in an installation box with a diameter of ø60 mm.

Configuration

For the initial configuration of the Fox module, it is necessary to download and run the free Fox application available for mobile devices running the system:

  • Android, version 5.0 or higher;
  • iOS, version 12 or higher.

You can download the app directly from the stores:F-F-SHUTTER-Wi-STR1S2-P
-Blinds-Controller-230-V-fig-1

or via the website: www.fif.com.pl/fox

On the above page, you can also find detailed information on how to configure and operate the devices and the Fox mobile app.

Wiring diagram

F-F-SHUTTER-Wi-STR1S2-P-Blinds-
Controller-230-V-fig-3

Description of terminals

S1 input of local control button
(default – Down direction)
S2 input of local control button
(default – Up direction)
L power supply – phase wire
N power supply – neutral wire
↓ output to connect the blind motor (Down direction)
output to connect the blind motor (Up direction)

Note: One or more parallel-connected buttons can be connected to the local inputs. It is required to use mono-stable (momentary) buttons without a backlight.

First launch

After connecting the device to the power supply, it is recommended to personalize the device.
Personalization is the process of assigning passwords to access the device and setting up a connection to the home Wi-Fi network and (optionally) remote access to the device via the F&F cloud.

Note:

  • Do not leave the device switched on without performing the personalization. There is a risk that another user of the Fox application will gain access to your device. If you lose access to your Fox device, follow the procedure described in the Restore factory settings section.
  • For a detailed description of how to use the Fox application, see the context-sensitive help for the application (available under the „i” key in the mobile application) or go to www.fif.com.pl/fox/shutter.
  1. Start the Fox application.
  2. Open the program menu ( symbol in the upper left corner of the screen) and select the Start command.
  3. In the system selection window, press the wireless system icon and follow the directions in the following screens:

Remote access

Remote access configuration is necessary when you need to be able to access and control your Fox devices from outside your home when your phone app and Fox modules are not connected to the same local network. If you do not have a remote access account, create one by pressing Create Account button and follow the instructions displayed by the application. If you are adding an existing account to the application, you need to enter its parameters into the application: the email address used to create an account in the cloud and a password to access the cloud and add more devices. In the first field (Name), enter the name under which the account will be displayed in the application. After entering the data, press the Add button.

Note:

  • Adding an account is a one-time action. The created account is visible in the list at the bottom of the screen and can be used to personalize subsequent devices. In this case, you can skip the Remote Access screen by pressing the Next button.
  • Remote access can be set independently for each device in a further customization step. Lack of remote access does not block the functionality of the device, it can still be accessed within the local Wi-Fi network.

Password manager

Each Fox device allows you to enter two passwords: an administrator who has full configuration and device con-trol rights, and a user who can control devices but without access to configuration settings.
First, add passwords to the password manager. One or two predefined passwords are then substituted for the personalized controllers. To add a new password to the password manager, you must:

  • In the Enter name field enter a description of the password under which it will be visible on the device manager list (such as Home administrator, living room user),
  • In the Enter password field, enter the content of the password,
  • Press the Add button.

Note:

  • The password is the key to access the device. Devices can be grouped using the same passwords, and permis-sions to these groups can be delegated in the form of an assigned access password. This way, by deciding which passwords go to which users, you can freely manage access to devices.
  • For more information on the role of passwords and their use in user management, go to: www.fif.com.pl/fox.
  • To remove user rights to a selected device, change the access passwords on it.
  • Deleting a password from the Password Manager will lose access to all devices using the deleted password.

Calendar manager
Allows you to add links to online calendars that can be used to program the operating cycle of Fox controllers. More information can be found at: www.fif.com.pl/fox.

Search
Based on the previously entered information (remote access and password list), the application will start searching for devices.

Note: Before you start searching, you need to enable the Blu-etooth function on your phone and agree to access the location. This will allow you to directly search for nearby Fox devices.

The app searches for:

  • available devices nearby that are in factory mode;
  • devices available on your local network or connected to cloud accounts for which passwords were previously entered into Password Manager.

Note: The gray icon and gray device description indicate de-vices detected nearby via a Bluetooth connection. To add such a device click on the Bluetooth icon on the right side of the description and wait for the connection to be established. Once the connection is established, the icon and description turn white.

Pressing the “+” button adds device support to the application. For controllers in factory mode, the customization mechanism for the selected module is started here and the instructions in the Device Configuration window must be followed:

  • Enter the name under which the device will be displayed;

  • From the drop-down list of passwords, select the password for the administrator and user;

  • Set the parameters of the Wi-Fi network (network name and password) to which the device will connect;
    Note: Fox controllers can only connect to Wi-Fi networks operating in the 2.4 GHz band.

  • Set other configuration parameters as necessary: user password, remote access account, link to the programmer’s calendar, and the time zone and location of the device necessary for proper operation of the programmers;

  • After entering all the data, press the OK button and wait for the configuration to be sent to the device. The application will continuously display messages about the progress of saving the configuration and inform about possible errors;

  • When the configuration is saved correctly, the device disappears from the list of retrieved devices and is moved to the list of devices visible in the application.
    Note: If you personalize more devices, you can use the Set Defaults option at the top of the Device Configuration screen. Pressing this button will substitute all recently entered data (passwords, Wi-Fi settings, remote access, calendar, location, and time zone) into the new device.

Configuration and calibration of blinds

The controller is configured from the device settings in the Fox application. In order to do this, open the roller shutter view, expand the menu in the upper right corner and select the Settings menu. In the settings menu, select and expand the Advanced settings, and in the available options select (if necessary) the ability to control the slat tilt and perform calibration of the roller shutter travel time.

Note: The time of opening and closing of the roller shutters can be set automatically (Autocalibration button) or by manually entering of the travel time value (for this purpose un-check the box Auto position detection). The slat opening time is set manually using the Slat movement time slider.

LED signaling

The status of the module can be directly assessed by the STATUS light located on the front of the device.

Note: The grey color actually corresponds to the green LED and the black color to the red LED.

  1. The controller factory mode
  2. Connecting to a Wi-Fi network
  3. Connection to Wi-Fi network established
  4. No connection to the Wi-Fi network
  5. Restoring firmware

Restore factory settings

In case of a lack of access to the controller, for example, due to lost passwords, it is recommended that you reset the access passwords and then reconnect and configure the controller using the Fox application.

To reset passwords:

  1. While the controller is operating, press and hold the PROG button on the front of the controller. When the button is pressed, the green LED will start to flash rapidly.
  2. After about 5 seconds, the LED will turn off and you should release the PROG button.
  3. Press the PROG button briefly, the green LED will light up again.
  4. Press and hold down the PROG button. After about 3 seconds, the previously switched-on green LED control light will start to flash. After another 3 seconds, it will go out and the red LED light up.
  5. Release the button – after a few seconds the indicator LED will turn green and the controller will restart.
  6. After completing this procedure, the access passwords and parameters for remote access have been cleared. You can now search for your device again in the app and personalize it again.

Technical data

  • power supply

    • 85÷265 V AC
  • control input

    • control voltage 85÷265 V AC
    • control pulse current <1 mA
  • maximum load current (AC-1)

    • AC motor max
    • 320 W
  • maximum current (instantaneous)

    • AC-1 6 A
    • AC-3 1.5 A
  • power consumption

    • standby <1.2 W
    • operation (relay on) <2.2 W
  • communication

    • radio frequency 2.4 GHz
    • transmission Wi-Fi
    • radio power (IEEE 802.11n) <13 dBm
    • receiver sensitivity -98 dBm
  • terminal

    • 2.5 mm² screw terminals
  • tightening torque

    • 0.4 Nm
  • working temperature

    • 0÷45°C
  • humidity

    • <90%
      (no condensation of steam and aggressive gases)
  • dimensions

    • ø54 (size 48×43 mm), h= 25 mm
  • mounting

    • in ø60 flush-mounted box
  • ingress protection

    • IP20

Warranty

F&F products are covered by a 24-month warranty from the date of purchase. The warranty is only valid with proof of purchase. Contact your dealer or contact us directly.

CE declaration

F&F Filipowski sp. j. declares that the device is in conformity with the essential requirements of Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonization of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC.
The CE Declaration of Conformity, along with the references to the standards in relation to which conformity is declared, can be found on www.fif.com.pl on the product page.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals