MONDOLUX MO15FR Revenna Downlight Installation Guide
- June 3, 2024
- MONDOLUX
Table of Contents
MONDOLUX MO15FR Revenna Downlight
Dimension
Notes
- This fitting requires 100-240V AC/50HZ power input to the driver.
- Do not interchange any parts of this fitting.
- A minimum distance of 75mm is required around the fitting to allow for air ventilation.
- Allow a minimum distance of between the fitting and the illuminated subject of 800mm.
- Do not touch fitting when in use.
- Do not cover with any form of heatproof material.
- Do not install any inductive loads such as exhaust fans etc. within the same lighting circuit of the current fitting. Issues caused by such connections will not be covered under our warranty policy.
- If you have any questions about the installation of this product, please contact Mondolux.
Installation Steps
- Ensure the mains’ power is turned off.
- Cut the required holes in the ceiling. Ensure minimum space requirements between fitting and driver. See picture 1.
- Pass the driver power supply wires through the cutout and plug them into a mains socket.
- Connect the driver to the light fitting using the quick connector. See picture 2.
- Mount fixture to the ceiling and secure using the spring-loaded clips.
- Installation is complete.
Installation Diagram
Manufacturer and Importer Details
Manufacturer: Mondolux
Address: 10 Plane Tree Ave, Dingley Village
VIC, 3172, Australia
Phone: +61 9551 3748
Web: www.mondolux.com.au.
Importer: Lovisa Germany GMBH
Address: RichmondStrasse 6, Neumarkt-Galeri
50667 Cologne, Germany
TIN: DE340001753
EORI: DE895514661097043.
References
- Mondolux | Innovative Commercial Lighting Supplier Australia
- Mondolux | Innovative Commercial Lighting Supplier Australia
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>