Shopper Cab-PC-08363 Outdoor Smart Plug User Manual
- June 3, 2024
- Shopper
Table of Contents
Shopper Cab-PC-08363 Outdoor Smart Plug
Specifications
- 125 VAC 60H
- 15A 1875W Resistive
- BA max. 1000W tungsten load
- Wi-Fi: 802.11 b/g/n, 2.4GHz (not compatible with 5GHz Wi-Fi)
- Mobile device running IOS 9.0/watchOs2.0/Android 4.4 or higher
Features
Get started with your smart life journey by downloading the S+ Smart APP. Manage all devices on your smartphone or tablet. Easily connect to your home Wi-Fi and control multiple devices only with your fingertips. Save energy by creating your exclusive daily or weekly schedule to turn your devices on/off automatically. Use Alexa or Google voice control to turn your devices off without opening the APP.
Download App
Scan the QR code below or search’S+ Smart ‘ in the APP store or Google Play.
Register
Register an account on the S+ Smart APP.
-
Register with your email
-
Enter the verification code
Enter Verification Code -
Create a password that should contain both alphabets and letters.
Plug-in
Plug the smart plug device into the wall. Make sure the indicator light on the device is flashing rapidly blue, indicating the device is ready to connect. If the indicator light is not flashing, press and hold the power button located in the front side for 3 seconds.
- Reset one time(Press and hold) to reach Easy Mode(Fast blink blue, 2x per second).
- Reset again(press and hold) to reach AP Mode(Slow blinking blue, every 3 seconds).
Add Device(Easy Mode)
In S+ Smart APP, on the top right corner of the main page, click (+), or Add Device’ in the center, and choose ‘Socket’ or Power Strip.
Make sure the indicator light on the device is rapidly blue, indicating the device is ready to connect using Easy Mode. If not, press and hold the button for 3 seconds until the indicator light is flashing rapidly press ‘Next Step.
Setup Wi-Fi
Enter your Wi-Fi network password.
The S+ Smart will try to connect to your device. If the connection fails, try to connect with AP mode.
Add Device (AP Mode)
Make sure the device is in AP mode, blinking slowly. (See reset instructions in step 3).
- Select AP Mode:
- Go to the Wi-Fi setting, and connect to SmartLife- XXXX.
- Back to S+ Smart, start adding devices till complete.
Support
For any further support or help, please contact us at
1-866-979-7463.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>