omega OCI903FTZ 90cm Induction Cooktop User Guide
- August 6, 2024
- Omega
Table of Contents
omega OCI903FTZ 90cm Induction Cooktop
Overview
- A. Cooktop Controls
- B. Ø 220mm Zone × 2
- C. Ø 280mm Zone × 2
- D. FlexZone × 2
Cut-Out Diagram
Shown below are dimensions for your cooktop’s benchtop cut-out, as required
for its installation.
For minimum distance requirements and safety advice, please refer to your
supplied User Manual.
Details
Product Dimensions (W, D, H): 900 × 520 × 58mm
Cut-Out (W, D): 860 × 490mm | Warranty : 3 Years
Cooktop Controls
Zone Selection
Used to select and monitor which zones you would like to cook with.
FlexZone Select
This function combines two smaller zones to create a larger cooking surface.
Temperature Slider
Touching the slider increases or decreases the selected zone’s temperature setting.
Timer Function
A kitchen timer and a way to automatically shut off zones after a set period of time.
Start/Pause Button
This function is used to temporarily pause cooking, without having to power off.
Keep Warm
This function lowers a zone’s heat setting to keep food warm after cooking.
Child Safety Lock
Disables cooktop controls to prevent use, such as accidental activation by children.
Boost Function
Used to increase a zone’s heat setting to the maximum level for up to 5 minutes.
Power Button
This button is used to easily power the cooktop both on and off.
Support
Telephone: 1300 11 HELP (4357)
Email: support@residentiagroup.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>