COMIX SP1123UW Vertical Power Socket User Manual
- June 3, 2024
- COMIX
Table of Contents
COMIX SP1123UW Vertical Power Socket
Important Safety Instructions
Read these instructions carefully and retain them for future use. If this
product is passed to a third party, then these instructions must be included.
DANGER Risk of suffocation! Keep any packaging materials away from
children – these materials are a potential source of danger, e.g. suffocation.
WARNING Risk of electric shock! Do not use in or near wet locations such
as kitchens or baths.
- Connect the product directly to a grounded power outlet only.
- Do not connect this product in series.
- Do not operate this product covered.
- This product is voltage-free only when unplugged.
Disposal
The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of Ilife. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling. For information about your recycing drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service. The status light of your Koosla Surge Protector indicates its current operating status, and this feature will help you determine if your surge protector Is operating normally and that there are no wiring IsSues with your outlet.
Protected
The Protected light indicates that your surge protector is functioning correctly and is providing protection to the devices you have connected to it. This light should remain ON as long as the surge protector is plugged into anoutlet and is turned ON. If this light goes out at any time, it means that your surge protector has served its purpose on protecting your equipment against damaging voltage fluctuations, surges, or spikes. If this happens, your surge protector should be replaced.
Grounded/Earthed
The Grounded or Earthed light indicates that your surge protector is connected to a properly grounded outlet. If this light is not ON, you may have a ground- wiring problem and shoud contact an electrician to inspect and properly ground the outlet. Not Grounded/ Not Earthed Light The Not Grounded or Not Earthed light indicates that your surge protector is not connected to a properly grounded outlet. If this light is ON, you may have a ground-wiring problem and should contact an electrician to inspect and propely ground the outlet.
SPECIFICATION
OVERVIEW
- AC Outlets
- USB Power Indicator
- USB Charging Ports
- AC Outlet ON/OF Switch
- AC Outlet Power switch indicator
- Surge Protection Indicator
- Grounded Protection Indicator
FCC
This device complies with part 15 of the FCC rules. Operations subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.