IQ sound IQ-170BT Wireless Headphone with FM Radio and Phone Mic User Manual
- June 13, 2024
- IQ sound
Table of Contents
IQ sound IQ-170BT Wireless Headphone with FM Radio and Phone Mic
Product Information
- Model Number: IQ-170BT
- Micro USB Charge Port
- LED Indicator
- Bluetooth Version: 5.1
- Functions: BT, FM, Hands-free, AUX
- Output Power: 30mW
- Speaker: 40mm
- SNR: 58dB
- Working Distance: 10 Meters
- Battery: 3.7V/200mAh Lithium battery (Non-replaceable)
- Charging Time: Approx. 1-2 Hrs
- Play Time: 5-6 Hrs
- Product Size: 180 x 80 x 185mm
- Frequency Response: 20Hz – 20KHz
Note: Battery life & charging time may vary based on usage & types of devices used.
Product Usage Instructions
To activate Google / Siri:
- Locate the button labeled “8” on the device.
- Press the button shortly to activate Google / Siri.
Environmental Protection:
Do not dispose of waste electrical production with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.
Warranty Information
Supersonic Inc. provides a ninety (90) day warranty from the date of
original purchase for this product. The warranty covers defects in materials
and workmanship under normal use. Proof of purchase (receipt) is required. For
additional information, please visit http://www.supersonicinc.com/warranty.
SAFETY INSTRUCTIONS
- For indoor use only.
- Do not use this product near sources of water.
- Clean only with dry cloth.
- Do not block any ventilation openings.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/ accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power-supply cord or plug is damaged, objects have fallen into the apparatus, does not operate normally. or has been droned.
WARNING!
This is not a toy. Adult supervision is recommended. Do not allow small
children to use this product. The presence of small parts may present a
choking hazard. Do not use this product with non-compatible stereo devices.
Using earphones at high volumes may affect your hearing. For traffic safety,
do not use this product whilst crossing roads, driving or cycling.
BATTERY INFORMATION
WARNING: The device is equipped with an integrated lithium battery. The
battery cannot be replaced.
Do not attempt to remove the battery from the device.
ICON AND FUNCTION DESCRIPTION
- – Power ON/OFF
- – (+) Increase the Volume/Next Song
- – (-) Decrease the Volume/Previous Song
- – Micro USB Charge Port
- – AUX Port
- – LED Indicator
- – Built-in Mic
- _ Activate Siri
OPERATION
CHARGING THE HEADPHONE
- The headphone has a built in rechargeable battery. When the battery is out of power the headphone wil automatically turn OFF.
- Please recharge the headphone when battery is low.
- Plug the Micro USB cable end of the USB charging cable included into the product charge port.
- Plug the opposing end of the cable into the USB port of your computer or other device made for USB charging.
- A RED LED light will illuminate indicating that the device is being charged.
- It is recommended to fully charge the device before first use.
POWER ON/OFF THE HEADPHONE
- Long press U about 2 seconds on, the blue red light flashes, then enter the wireless pairing state.
- Activate the Bluetooth function on your source device (Smart Phone or Tablet)
- Search for available Bluetooth devices and you will find ” IQ-170BT “, pair it with this device.
- Once paired successfully, you will hear another indication tone.
- Long press U about 3 seconds to turn off. the red light flashes three times.
TIPS:
- If not connected wireless mode, it will turn off automatically after 5 minutes, so don’t worry about waste of electricity for standby.
- When the unit is not in use, turn OFF the device to save the battery power.
LISTENING TO MUSIC WIRELESSLY
- Please ensure that your device (Smart Phone, Tablet or Other device) is paired with the Bluetooth Headphone to stream music wirelessly. Once it is paired, play music from your device. You can either control the music playing through your device or through the headphone.
( Note: An indication tone will alert you when the volume is adjusted to
the maximum level.)
GOOGLE / SIRI ACTIVATE
Shortly press the button 8 to activate Google / Siri.
PHONE CALL FUNCTIONS
- Please ensure that your cell phone is paired with the Bluetooth Headphone to use the below functions.
- Answer Incoming Call: Short press the button* O “once to answer an incoming call.
- Reject Incoming Call: Press and hold the button O”for 2 seconds.
- End Call Incoming Call: After your phone conversation, short press the button” O”to end a phone call.
- Redial last number: Double click the button O” to redial last number.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be us ed in portable exposure condition without restriction.
LISTENING TO FM RADIO
- Three press the “O” to switch to FM radio mode. Plug in the Micro USB charging cable to the charging port to act as the radio antenna.
- Double-press the button “O to search all the stations.
It will take a few minutes to get all stations scanned and registered in
memory automatically.
AUX INPUT
-
When you put in the audio cable, the headphone will power off automatically and than you can use it as it
wired headphone. -
Use the audio cable contact to the digital music player, mobile phone and other audio-visual products SO on all kinds of audio source.
CHANGE FROM WIRELESS TO ORDINARY HEADPHONE
- Insert the 3.5mm audio line jack into the audio input ports, the wireless headphone will automatically power off, can use the wireless headphone as ordinary headphone now, at the same time the function of the wireless headphone are useless (power off status) to save electricity.
Warranty
Basic Warranty StatementSupersonic Inc. “Supersonic”) warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use, for ninety (90) DAYS from the date of original purchase. Proof of purchase (receipt) required. Please visit htto://www supersonicinc.com/warrantv for additional information.
FCC
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>