IQ sound IQ-9000BT Micro Hi-Fi Component System Instruction Manual
- June 6, 2024
- IQ sound
Table of Contents
IQ sound IQ-9000BT Micro Hi-Fi Component System
DEAR CUSTOMER
In order to obtain the best product performance, please read this instruction
manual carefully before use and keep it for future reference.
Security Warning
- The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons
- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
- WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DUE TO THE HIGH RISK OF FIRE OR ELECTRIC SHOCK, DO NOT OPEN THE CABINET DANGEROUS HIGH VOLTAGES ARE PRESENT
- INSIDE THE ENCLOSURE. ONLY QUALIFIED SERVICE PERSONNEL SHOULD ATTEMPT THIS.
- CAUTION: This Digital Video Disc Player employs a Laser System. To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation when open and interlocks defeated. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
- DO NOT STARE INTO BEAM.
- To ensure proper use of this product, please read this owners manual carefully
- Do not put the battery into the remote in conditon of sunshine fire or over hot environment.
WARNING : TO AVOID THE DANGER OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.NEVER OPEN THE CABINET, AS DANGEROUS HIGH VOLTAGES ARE CONTAINED INSIDE.ONLY A QUALIFIED SERVICE TECHNICIAN SHOULD ATTEMPT OPEN THE CABINET.
CAUTION: This Digital Versatile Disc Player employs a laser system. To prevent direct exposure to the laser beam, do not open the enclosure. Visible laser radiation is present when enclosure is open. DO NOT STARE INTO BEAM. Additionally, the use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location, or contact the service center.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
PROTECT YOURSELF!
Record the model and serial numbers for this unit while it is easy to see
them. These numbers are located on the back of the unit”s cabinet. Retain this
information for future reference.
Retain this information for future reference.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE IS NO USER SERVICEABLE PART INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING: Do not dispose of the battery in fire. Or recharge put in
backward may explode or leak.
Basic safety requirements
General Information
Disc handling precautions
- To keep the disc clean, handle the disc by its edge. Do not touch the surface.
- Do not stick paper or tape on the disc. If there is glue (or a similar substance) on the disc, remove the glue completely before using the disc.
- Do not expose the disc to direct sunlight or sources such as hot air ducts, or leave it in a car parked in direct sunlight as there can be considerable rise in temperature inside the car. After playing, store the disc in its case.
- Do not write on the label side with a ball-point pen or other writing utensils.
- Be careful not to drop or bend the disc.
Disc cleaning precautions
- Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.
- Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs. Disc installing precautions
- Do not install more than 1 disc on the disc tray.
- Do not place the disc on the tray upside down.
- Do not try to close the disc tray when the disc is not installed properly.
Introduction and setup
Front panel
Max. 32GB memory size of USB device can be supported.
Unless stated otherwise, the remote control can operate all the features of
the VIDEO Player.always point the remote control directly at the remote sensor
on the front of the VIDEO Player, not the TV
FM Function
- Press “FUN” and then choose FM mode.
- Press “SCAN” on remote controller to search FM radio stations automatically.
- Press “PREV/CH-” “NEXT/CH+” for previous/next FM station
AUX INPUT Description
The CD support Mp3, MP4, CD etc which lower than 2V make sound bigger by AUX
L/R input. Press “FUN” key on the remote control or on the front panel to
change into AUX IN mode, and also can press Volume +,-to control the sound.
Connect via Bluetooth
- Press the FUNCTION button to select BLUETOOTH mode.
- To pair with a smartphone, turn on Bluetooth in your mobile phone and search for devices.
- Select the device named IQ-9000BT.
- You can hear a little sound coming from the unit after successfully pairing via Bluetooth.
- Now you can play music in your mobile phone
Back Panel
Connection
Connection FM aerial
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>