woojer Strap Series 3 Device User Manual
- June 3, 2024
- woojer
Table of Contents
Woojer Strap Series 3 User Manual
What’s in the Box
- Woojer Strap Series 3™
- USB-C cable
- Soft pouch
- User manual
Woojer Strap Series 3™ Overview
- Power/Bluetooth button
- Power/Bluetooth source indicator
- Charging indicator
- Bluetooth Headphones indicator
- Bluetooth headphones indicator
- Volume Up button
- Volume Down button
- Volume indicator
- Sensation Up button
- Sensation Down button
- 3.5mm audio-in port
- Digital USB-C input Port/charging port
- Headphone output jack
First time usage
Woojer app
Scan the following QR to install Woojer app on your mobile or browse to
www.woojer.com/woojerapp Follow the
onscreen instructions to set up your Woojer.
Woojer app lets you easily control your Woojer, pair it with other devices,
update its firmware, finetune your experience, get updates for content,
special deals, news and much more. For the best experience, it’s highly
recommended to install Woojer app on your mobile.
Update your firmware
It’s very important that you update your Strap’s firmware to the latest
available version. This makes sure your Strap supports all up-to-date features
and bugfixes. To update your Strap, run Woojer app and follow the update
instructions.
Find Content
Find amazing content, for great Woojer experience at
www.woojer.com/content
Get Support
All current information about your Strap is to be found on our Support Portal
at www.woojer.com/support. You can also find
there technical-related articles and videos to help you utilize and
troubleshoot your Strap. If you still need help, please contact us using
Woojer app or through Woojer Support Portal.
Woojer Strap Series 3™ LED Indicators
Power Indicator
Solid green – Strap is on, no audio source connected
Solid blue – Strap is on, audio source connected
Bluetooth Source Indicator
Solid blue – Bluetooth audio source connected
Blue, slow blinking – Searching for a Bluetooth audio source
Red/blue, fast alternating blinking – Bluetooth Audio source pairing
Bluetooth Headphones Indicator
Solid blue – Bluetooth headphones connected
Blue, slow blinking – Searching for Bluetooth headphones
Red/blue, fast alternating blinking – Bluetooth headphones pairing mode
Charging indicator
Battery charge meter: Green – Yellow – Orange – Red – Blinking Red
Charging Your Strap
- Connect a standard mobile charger to the USB-C port, using the included USB-C cable. Before first use, fully-charge your Strap.
- While charging, the LED indicator changes its color according to the battery level. Once fully charged, it’ll show in solid green.
- Do not use the Strap while charging.
Connecting to an Audio Source
Woojer Strap Series 3™ can be connected to various audio sources using either
wired connection or wireless Bluetooth. Choose the right diagram according to
your hardware and follow the connection instructions.
For other hardware types, or special hardware setups, please visit our support
portal at
www.woojer.com/support
Gaming Console
- Connect your console’s controller to the Strap’s 3.5mm audio-in port, using an audio cable.
- Adjust the source volume level… [diagram]
PC
- Connect your PC to the Strap’s Digital USB-C input Port using the provided USBC cable.
- Set the Strap as the PC’s default playing device
[diagram]
VR Headset
- Connect your VR headset to the Strap’s 3.5mm audio-in port, using an audio cable.
- Adjust the source volume level…
Note: It’s not recommended to use Bluetooth or USB-C cable to connect your VR headset.
[diagram]
Bluetooth Source
Pair your Bluetooth source (e.g.: your mobile) with the
-
Open Woojer app and follow the pairing instructions (recommended)
OR -
Make sure the Strap is turned off
-
Press and hold the Power button for 5 seconds. The Bluetooth Source Indicator will blink alternately with red and blue.
-
On your source device, enter Bluetooth screen and locate the Woojer Strap Series 3.
-
Pair and connect the Strap with your source device.
[diagram]
Connecting to Headphones
Woojer Strap Series 3™ can be connected to either wired or Bluetooth headset.
When turning on, it will first search for previously paired Bluetooth headset.
Note: For Bluetooth connection, we highly recommend using the Woojer app.
Bluetooth Headset Connection Manually (without Woojer app)
- To enter headset pairing mode, press and hold the Power button and the Volume Up button for 5 seconds. The Bluetooth Headphones Indicator will blink alternately with red and blue.
- Set your Bluetooth headset into pairing mode and place it within proximity to the Strap.
- Both devices should be paired within 30 seconds.
Wired headset connection
Connect your headset to the Strap’s Headphone jack using an audio cable.
Wearing the Strap
- Position your Strap: Around your chest / on your waist / against your spine.
- Adjust size by extending or reducing strap length.
Playing
Once you’ve connected the audio source device and headset to the Strap:
- Play your content from the connected source device.
- Use Woojer app for accurate synchronization between audio and haptic.
- Use the Strap’s control buttons to adjust the headphones output levels and sensation levels.
Care and Maintenance
- Keep the Woojer Strap Series 3™ and accessories device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
- Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
- Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
- Do not attempt to open the device.
- Do not drop. Rough handling can break internal circuit boards and fine mechanics.
- Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
- If the device doesn’t work properly, please contact our technical support team through our website, at www.woojer.com/support
Safety and Warnings (Read carefully before use)
- This product contains a rechargeable Lithium-ion battery and should not be disposed together with household waste. This product must be discarded in accordance with your local legal requirements.
- As with other devices with permanent magnets, Woojer Strap Series 3™ is not suitable for use by persons with pacemakers.
- Do not use Woojer Strap Series 3™ with headphones/earphones while driving, cycling, or operating any motorized vehicle. This may create a traffic hazard and may be illegal.
- It can be dangerous to play your music with headphones/earphones at high volume while walking or engaged in other activities. Exercise extreme caution and discontinue use in potentially hazardous situations.
- Avoid using headphones/earphones at high volume. Hearing experts advise against continuous loud and extended music play. Keep the volume at a moderate level, so that you are better able to hear outside sound.
- Do not use your Woojer Strap Series 3™ while it is charging.
- If Woojer Strap Series 3™ overheats excessively during use, do not use it and contact our technical support team through www.woojer.com/s
- Avoid charging your Woojer Strap Series 3™ at extremely high or low temperatures.
Declaration of Conformity, Certificates, and Safety Protocols
Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interferences that may cause undesired operation .Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirement.
The device can be used in portable exposure conditions without restriction.
Canada-industry Canada (IC)
This radio transmitter has been approved by Industry Canada. This Class B
digital apparatus complies with Canadian standard ICES-003 This device
complies with Industry Canada Licence exempt RSS standard(s). Operation is
subject to the following two conditions. (1) this device may not cause
interference and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. The device has
been evaluated to meet the general RF exposure requirement. The device can be
used in portable exposure conditions without restriction.
Bluetooth
The Woojer Strap Series 3™ Qualified Design Listing was achieved in accordance
with the Bluetooth Qualification Process as specified within the Bluetooth
Specifications.
CE Declaration of Conformity
We, Woojer Ltd., declare under our sole responsibility, that this Woojer Strap
Series 3™ product is in conformity with the standards and other normative
documents.
Warranty
12 months from purchase. You can learn more about the warranty through this QR
code.
Add link to warranty page/paragraph.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2)This device must accept any interference, including interference that may
cause undesired operation of the device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>