Hamilton Beach 19901 Steam Iron & Vertical Steamer User Manual
- June 3, 2024
- Hamilton Beach
Table of Contents
Hamilton Beach 19901 Steam Iron & Vertical Steamer
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
- Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
- Only use an iron for its intended use.
- To avoid the risk of electric shock, do not immerse the iron in water or other liquids.
- Always turn the iron to OFF ( ) before plugging or unplugging the iron from the electrical outlet. Never pull on the cord to disconnect the iron from the electrical outlet; instead, grasp the plug and pull on the plug to disconnect the iron.
- Do not let the cord touch hot surfaces. Let the iron cool completely before putting the iron away. Loop cord loosely around iron for storing.
- Always disconnect the iron from the electrical outlet before filling the iron with water, emptying the water from the iron, and when the iron is not in use.
- Do not operate the iron with a damaged cord or in the event the iron has been dropped or damaged or there are visible signs of damage or it is leaking. To avoid the risk of electric shock, do not disassemble the iron. Take it to a qualified serviceman for examination and repair. Incorrect assembly might result in a risk of electric shock when the iron is used after reassembly.
- The iron must be used and rested on a stable surface.
- When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
- Do not leave the iron unattended while the iron is connected or on an ironing board.
- Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down—there might be hot water in the reservoir.
- To avoid a circuit overload, do not operate an iron on the same circuit with another high-wattage appliance.
- If an extension cord is absolutely necessary, a cord with an ampere rating equal to or greater than the maximum rating of the iron shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating. Care shall be taken to arrange the cord so that it cannot be pulled or be tripped over.
PARTS AND FEATURES
- Spray Nozzle
- Water Tank Cover
- Steam Switch
- Temperature Settings Button
- Temperature Settings/Auto Shutoff Indicator
- Spray and Steam Burst Buttons
- Soft Touch Grip
- Cord
- Heel Rest
- Self-Clean Button
- Dura thon Nonstick Soleplate
- Retractable Cord
HOW TO DRY IRON
- Set steam switch to
- Press and hold the temperature settings button until desired temperature is illuminated. Allow 2 minutes to reach desired temperature.
HOW TO STEAM IRON
-
Unplug iron. Then, using a measuring cup with a small pour spout, pour tap water into water fill opening and fill iron to MAX Fill line. If you have extremely hard water, alternate between tap water and distilled water for use in the iron. Plug iron into outlet.
-
Press temperature settings button to select desired fabric setting in the steam range. Allow 2 minutes for the iron to reach the desired temperature.
CAUTION! Burn Hazard: Attempting to steam iron on a lower temperature setting or failing to allow the iron to preheat for 2 minutes can result in hot water dripping from the soleplate. -
Set adjustable steam switch to desired steam setting.
CARE AND CLEANING IRON
- Press temperature settings button until OFF ( ) is illuminated. Unplug and let cool.
- Drain water and secure cord.
- Store in an upright position.
SOLEPLATE
- Never iron over zippers, pins, metal rivets, or snaps, since these may scratch the soleplate.
- To clean buildup on soleplate, wipe with a sudsy cloth. Do not use abrasive cleansers or metal scouring pads.
LIMITED WARRANTY
This warranty applies to products purchased and used in the U.S. and Canada.
This is the only express warranty for this product and is in lieu of any other
warranty or condition.
This product is warranted to be free of defects in material and workmanship
for a period of five (5) years from the date of original purchase in Canada
and one (1) year from the date of original purchase in the U.S. In addition,
the Durathon™ nonstick covering on the soleplate is warranted not to wear out
for a period of ten (10) years from the date of original purchase. During this
period, your exclusive remedy is repair or replacement of this product or any
component found to be defective, at our option; however, you are responsible
for all costs associated with returning the product to us and our returning a
product or component under this warranty to you. If the product or component
is no longer available, we will replace with a similar one of equal or greater
value.
This warranty does not cover glass, filters, wear from normal use, use not in
conformity with the printed directions, or damage to the product resulting
from accident, alteration, abuse, or misuse. This warranty extends only to the
original consumer purchaser or gift recipient. Keep the original sales
receipt, as proof of purchase is required to make a warranty claim. This
warranty is void if the product is used for other than single-family household
use or subjected to any voltage and waveform other than as specified on the
rating label (e.g., 120V ~ 60 Hz).
We exclude all claims for special, incidental, and consequential damages
caused by breach of express or implied warranty. All liability is limited to
the amount of the purchase price. Every implied warranty, including any
statutory warranty or condition of merchantability or fitness for a particular
purpose, is disclaimed except to the extent prohibited by law, in which case
such warranty or condition is limited to the duration of this written
warranty. This warranty gives you specific legal rights. You may have other
legal rights that vary depending on where you live. Some states or provinces
do not allow limitations on implied warranties or special, incidental, or
consequential damages, so the foregoing limitations may not apply to you.
To make a warranty claim, do not return this appliance to the store. Please
call 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada or visit
hamiltonbeach.com in the U.S. or hamiltonbeach.ca in Canada. For faster
service, locate the model, type, and series numbers on your appliance.
FAQs
What are Hamilton Beach 19901 steam iron’s drawbacks?****
It might take some time to iron your fabrics with a steam iron because they don’t produce as much heat as steam generators or other steaming systems, and they also need to be refilled more frequently.
How long does a Hamilton Beach 19901 steam iron typically last?****
Even the priciest steam irons should last 10 to 20 years. You might decide to upgrade before your iron reaches the end of its useful life, though, as there’s a good chance that technology will advance significantly over the next 20 years.
How does a Hamilton Beach 19901 steam iron perform when used without water?****
Yes. To drain the water from your steam iron, simply unplug it, let it cool, and then empty the water tank. If your iron has a dry/steam setting, select it; if not, select “MIN”. If your iron has a dry/steam setting, select it.
Is the Hamilton Beach 19901 steam iron energy-efficient?****
A steam iron or flatiron consumes about 800-2000 watts per day. For instance, if you leave your iron on for 10 minutes per day for a month, it will use approximately 5 kWh of electricity. You can determine the precise amount of electricity that your model uses, despite being one of your appliances with one of the highest rates of electricity usage.
What advantages does a Hamilton Beach 19901 steam iron offer?****
A steam iron is the best tool for giving your clothes a perfectly pressed appearance and comfortable feel. The steam from the iron moistens the fibres of your clothing, making pressing easier. Additionally, the steam maintains the fibres in place for a longer amount of time.
What kind of water works best for steam irons Hamilton Beach 19901?****
In order to lengthen the lifespan of your iron or steamer, it is advised to use distilled or demineralized water (50 percent tap water and 50 percent demineralized water could also be used).
How is the water tank for a Hamilton Beach 19901 steam iron cleaned?****
- Fill the water tank halfway with warm water, then gently shake it. 2) Empty it and thoroughly wash it with water (do not use detergent). Note: Algae may grow in your iron’s tank if water is left there for an extended period of time. Algae or residue won’t grow if you empty the water tank on your Philips steam iron on a regular basis.
What steam iron model, Hamilton Beach 19901, has the best wattage?****
Each iron we recommend has at least 1,500 watts of power output, which is sufficient for the task. My testing shows that low-wattage irons don’t produce enough heat or steam to get rid of tough wrinkles.
How long does it take a steam iron like the Hamilton Beach 19901 to heat up?****
The average time for your iron to heat up is two minutes. By observing the “Wait” and “Ready” indicators, you can determine when your iron has reached the ideal temperature for the fabric type you selected.
How should a Hamilton Beach 19901 steam iron’s base be cleaned?****
Simply combine some baking soda with a little water to make a paste. Then, using a soft brush or towel, scrub the soleplate of the iron with this paste. Just use water to wipe it away.
How is a Hamilton Beach 19901 steam iron that has burned cleaned up?****
Utilizing a clean microfiber cloth dipped in a paste made of equal parts vinegar and baking soda, rub the soleplate in small circular motions. If any paste is still present, completely remove it with a clean microfiber cloth dipped in distilled water (especially important if your water is hard).
Why does brown material leak from my steam iron, a Hamilton Beach 19901?****
When using steam, the reservoir needs to be cleaned if the iron leaves brown water stains on the clothing. After completely emptying the reservoir, refill it with 1/4 cup distilled white vinegar and 3/4 cup distilled water.
How frequently should your Hamilton Beach 19901 steam iron be cleaned?****
It’s recommended to descale your iron every one to two months. Cleaning your iron on a regular basis will ensure that all calcium particles are removed, enhancing its performance and extending its life.
Can you clean stains with a Hamilton Beach 19901 steam iron?****
Use the highest steam setting on your iron, apply it directly to the towel, and move it back and forth over the stain for about ten seconds. As you do this, the iron might hiss and release steam. The stain on the towel should now be visible if you lift it up and look at it without using the iron.
Can you remove wrinkles with the Hamilton Beach 19901 steam iron?****
Usually, when steam ironing, the fabric is misted with steam droplets or moisture to make it moist so that wrinkles can be removed more easily. A steam iron works best on materials like cotton, linen, muslin, and denim.