SESSAK K48818-1 REMI Instructions

June 3, 2024
SESSAK

SESSAK K48818-1 REMI

SESSAK-K48818-1 REMI-PRODUCT

Read the entire instructions before installing the luminaire Save the instructions for potential future need. Disconnect the electrical power-supply before installation or service. If the electrical cord of the luminaire becomes damaged, the Jumnaire must be discarded.

Symbols that POTENTIALLY can be found on the luminaire and their meaning. CHECK the luminaire.

  • Class I. The luminaire must be connected to protective earth.
  • Class II. The luminaire is double-insulated and is not to be connected to protective earth.
  • The product conforms with health, safety, and environmental protection standards for products sold within the European economic Area (EEA)
  • The protective earth cable (usually yellow-green) is connected to the terminal identified by this symbol.
  • The phase (live) cable (usually brown) is connected to the terminal identified by this symbol (L)
  • The neutral cable (usually blue) is connected to the cable identified by this symbol (N)
  • States the minimum distance in meters to the area that is to be
  • illuminated, TAKE INTO ACCOUNT doors, widows etc., that
  • could possibly come within this distance when they are opened.
  • Ingress Protection class 21 (protection against dripping water)
  • Ingress Protection class 44 (protection against splashing water)
  • The HIGHEST ALLOWED power of the bulbs in Watts
  • Only for indoor use
  • Is NOT to be thrown away with household waste. You can help in the protection of the environment by taking discarded products to a recycling station intended for them.

INSTALLATION

SESSAK-K48818-1 REMI-FIG1

SESSAK OY AB PORVOO – FINLAND – www.sESSAK.FI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals