SESSAK K53318-1 Rusetti Riippuvalaisin Instruction Manual
- May 15, 2024
- SESSAK
Table of Contents
JENNI INKEROINEN
**FOR SESSAK
K55318-1
220-240V ~ 50/60Hz
1x E27 Max. 15W**
K53318-1 Rusetti Riippuvalaisin
Read the entire instructions before installing the luminaire Save the
instructions for potential future need. Disconnect the electrical power-supply
before installation or service.
If the electrical cord of the luminaire becomes damaged, the lumnaire must be
discarded.
Symbols that POTENTIALLY can be found on the luminaire and their meaning.
CHECK the luminaire.
| Class I. The luminaire must be connected to protective earth.
---|---
| Class II. The luminaire is double-insulated and is not to be connected to
protective earth.
| The product conforms with health, safety, and environmental protection
standards for products sold within the European Economic Area (EEA)
| The protective earth cable (usually yellow-green) is connected to the
terminal identified by this symbol.
L| The phase (live) cable (usually brown) is connected to the terminal
identified by this symbol (L)
N| The neutral cable (usually blue) is connected to the cable identified
by this symbol (N)
| States the minimum distance in meters to the area that is to be illuminated,
TAKE INTO ACCOUNT doors, widows etc., that could possibly come within this
distance when they are opened.
IP21| Ingress Protection class 21 (protection against dripping water)
IP44| Ingress Protection class 44 (protection against splashing water)
MAX_W| The HIGHEST ALLOWED power of the bulb(s) in Watts
| Only for indoor use
| Is NOT to be thrown away with household waste. You can help in the
protection of the environment by taking discarded products to a recycling-
station intended for them.
SESSAK OY AB – PORVOO – FINLAND – WWW.SESSAK.FI
sessak_lighting
Documents / Resources
|
SESSAK K53318-1 Rusetti
Riippuvalaisin
[pdf] Instruction Manual
K53318-1 Rusetti Riippuvalaisin, K53318-1, Rusetti Riippuvalaisin,
Riippuvalaisin
---|---