BEZGAR TD203 Remote Control Car User Manual
- June 12, 2024
- BEZGAR
Table of Contents
BEZGAR TD203 Remote Control Car
Product Information
Product Name: REMOTE CONTROL CAR
Model: TD203
Manufacturer: SHANTOUSHI CHENGHAIQU XIONGMUWANJUSHANGHANG
Address: NO.3-2, BLDG 4, NORTH OF THE XINXIN LU, XIMEN, CHENGHUA, CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG, CHINA 515800
Note: This equipment has been tested and found to comply with the limits for a Class B.
Product Usage Instructions
- Ensure the remote control car is fully charged before use.
- Remove the car from its packaging and place it on a flat surface.
- Turn on the remote control car by switching the power button located on the car’s body.
- Use the remote control to steer and control the movement of the car.
- The remote control car can move forward, backward, and turn left or right.
- When not in use, turn off the remote control car to conserve battery life.
- If the car stops responding to the remote control, check the batteries in both the car and the remote control for proper installation and charge.
- Keep the remote control car away from water and other liquids to prevent damage.
- Do not attempt to disassemble or modify the remote control car as it may void the warranty.
- Store the remote control car in a cool, dry place when not in use.
- PRODUCT NAME: REMOTE CONTROL CAR
- MODEL: TD203
- MANUFACTURER: SHANTOUSHI CHENGHAIQU XIONGMUWANJUSHANGHANG
- ADDRESS: NO.3-2, BLDG 4, NORTH OF THE XINXIN LU, XIMEN, CHENGHUA, CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG, CHINA 515800
The product can use in all European members without restrict.
Hereby, SHANTOUSHI CHENGHAIQU XIONGMUWANJUSHANGHANG declares that the radio
equipment type 2.4g SRD is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://bezgar.com/pages/doc
Temperature category II (Portable): -10 °C to +55 °C; The operation
frequency range is 2410MHz~2473MHz the max RF power is 0.011 mW.
Note
-
Electronic control product
This product is suitable for children aged six or above. Please pay attention to and prevent electric shock when using electronic products. -
Please use the product under the supervision of adults.
Warning: Please do not disassemble or modify this product, or it may not function properly due to any change.
Operation tips
- Only the original batteries and charging device provided by our company are recommended.
- A full charge takes 90 minutes. The LED indicator turns red when charging, and turns off when charging is complete.
- Do not mix new and old batteries.
- Do not mix alkaline, standard (carbon-zinc, or rechargeable nickel-cadmium) batteries.
Basic controls
Inserting The Remote Control Batteries
- Observe the polarity markings on the battery compartment to ensure that the batteries are inserted in the correct polarity.
- Attach the cover to the battery compartment as shown in the diagram below.
- Insert rechargeable batteries into the battery compartment.
- Use a screwdriver to secure the battery compartment cover in place.
Inserting the battery compartment into the vehicle
WARNING: The charger used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and that, in the event of such damage, the toys must not be used with this charger until the damagehas been repaired.
The following instructions should be marked for checking:
Non-rechargeable batteries are not to be recharged The batteries should be
charged under adult supervision Different types of batteries or new and used
batteries are not to be mixed Batteries are to be inserted with the correct
polarity (+ and -) Exhausted batteries are to be removed from the toy The
supply terminals are not to be short-circuited.
The Statement of compliance is available at the following address.
https://bezgar.com/pages/doc
RSS:
CAN ICES-003(B)/NMB-003(B)
This device contains license-exempt transmitter(s)/receiver(s)that comply with
the Innovation, Science and Economic Development of Canada’s license exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Produce name: REMOTE CONTROL CAR
Model: TD203
Manufacturer: SHANTOUSHI CHENGHAIOU XIONGMUWANJUSHANGHANG
Address: NO.3-2,BLDG 4,NORTH OF THE XINXIN LU,XIMEN, CHENGHUA, CHENGHAI\
DISTRICT,SHANTOU CITY, GUANGDONG,CHINA 515800
FCC STATEMEMT
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user IS encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.