TENMARS TM-223 Mini Pocket UVAB Light Meter User Manual

June 9, 2024
TENMARS

TENMARS TM-223 Mini Pocket UVAB Light Meter

TM-223 Mini Pocket UVAB Light Meter

Introduction

Please, read the operating instructions in details before you use this UVAB optics meter, so you will operate the meter correctly. This meter can be used in industry and home.

Application:
  • Monitoring blue light radiation hazards in welding.
  • UV sterilization.
  • Graphic arts.
  • Photochemical matching.
  • UV EPROM erasure.
  • Photos resist exposure.
  • Curing of inks, adhesives and coatings.
  • Convenient, no need to adjust, data displayed clearly.
  • Weathering “degradation studies”.
  • UV sterilization.
  • Virology.
  • Microbial genetics.
  • DNA research.
  • Biologic hoods.
  • General laboratory use.

Accessories

  • 1 Meter
  • 1 Carrying case
  • 1 User’s Manual
  • 2 Battery 1.5V( AAA MN2400 LR03 AM4)

Safety Precaution

| Caution! Please refer to this manual. Improper use may damage the meter and its components.
---|---
| Complies with European Directive.

  • Do not operate in environments with flammable gas or humid environments.
  • Operating altitude: up to 2000M.
  • Operating environment: Indoor use; Pollution degree 2.
  • Clean with soft cloth when dirty, such as glasses cloth.
  • Do not clean with chemicals and other solvents.
  • EMC: EN61326-1:CISPR 11:Group 1, Class B
  • Class B – Equipment for use in all establishments other than domestic.
  • Group 1 – RF energy generated is needed for internal functioning.

Instrument Description

The LCD display SHOWS
  1. Main display
  2. Reading lock.
  3. ZERO display.
  4. Low power reminder display.
  5. uW/cm2 unit display.
  6. mW/cm2 unit display.
  7. Decimal point display.
Buttons:
  1. Power button.
  2. Backlight button.
  3. Data hold button.
  4. Zero button.
  5. UNIT buttons

General Specifications:

  • Zero function.
  • 1uW/cm2 or 1.00mW/cm2 unit selection.
  • Data hold.
  • Back light: it will turn off automatically after turned on for 15 seconds .
  • Low battery indication
  • Overload display: “OL”.
  • Low battery indication” “:
  • Auto power off of 15 minutes.
  • Operating : Temperature 5℃~40℃, below 80%RH.
  • Storage temp. & RH : -10℃~60℃, below 70%RH.
  • Sensor: UV light sensor

Electrical Specifications

DISPLAY 3-3/4 digits LCD with maximum reading 4000
Measuring range 4000μW/cm2 ,20mW/cm2
Resolution 1μw/cm2 ,0.01mW/cm2
Accuracy ± 4(%FS + 2dgt) FS: full scale 15%:sunlight ultraviolet.
Spectrum Range 290~390nm
Calibration Point 365nm
Sample Time Approx. 3 sec.
Power Supply 2 batteries 1.5V
Battery life approx. 50 hr
Weight approx. 90g..
Size 133(L) x 48(W) x 23 (H)mm

Operation

Power button

Press the “ ” button to turn ON or turn off.

Button

Press the “ “button for the zero adjustment if any digits are appearing. When the lid of the light receiving part is not opened, if it is found that it is not zeroed

Button

Press“ ”key backlight light on.
Backlight light turns off automatically after 15 seconds.

button

Press the “ ” button to switch from uW/cm2 to mW/cm2 .

Data hold button

Press to enable or disable the data hold function.

Maintenance or Repair

  1. When the When “ ” symbol is displayed on the  LCD, it means that there is insufficient power; please
    change the battery immediately in order to ensure its accuracy.

  2. Do not place the meter in locations that have high temperature, humidity or that are exposed to direct sunlight.

  3. Remember to turn off the power after usage; remove the battery if not used for a long period of time in order to prevent battery leakage and causing damages to internal components.

  4. When the instrument failure, only by the authorized service provider or return the original repair.

Battery Replacement

  1. Turn off the power.
  2. Open the battery cover at the back of the meter, remove the batteries.
  3. Please insert new 1.5V x 2 batteries according to the polarities.
  4. Put the battery cover back in place.
    Battery Replacement

Product Disposal

Note: This symbol indicates that the meter and its accessories must be separated and processed properly.

Professional Electrical and Environment
Test & Measurement Instruments:
Professional Electrical and Environment Test &
Measurement Instruments:
LED light meter, Temperature & Humidity meter, Infrared
Thermometer, Sound level meter, Light meter, EMF meter, UV Light meter, RF meter, Hot wire Anemometer, Co meter, Anemometer, Lan cable tester, Co2 meter, Solar power meter, Radiation meter,
Clamp meter, Multimeter, Phase Rotation test, Digital Insulation tester
Our products of high quality are selling well all over the world

TENMARS ELECTRONICS CO., LTD.
6F, NO.586 Ruiguang Rd, Neihu Dist.
Taipei City, Taiwan
E-mail:service@tenmars.com
http://www.tenmars.com

Documents / Resources

| TENMARS TM-223 Mini Pocket UVAB Light Meter [pdf] User Manual
TM-223, TM-213, TM-223 Mini Pocket UVAB Light Meter, TM-223, Mini Pocket UVAB Light Meter, Pocket UVAB Light Meter, UVAB Light Meter, Light Meter, Meter
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals