BEZGAR HQ051 Mini Drone for Kids User Manual

BEZGAR HQ051 Mini Drone for Kids

REGISTERING YOUR MODEL

In order to serve you better as our customer, please register your product within 15 days of your purchase on line at www.bezgar.com–Register your drone .

IMPORTANT INSTRUCTION

1. This product is not a toy but a precision equipment with integrated mechanics and electronics. This product requires expertise in aerodynamics and high-frequency transmitting. This product needs to be correctly assembled and debugged to avoid accidents. The product owner should operate and control it in as safe manner. Please note that we are not liable or responsible for any accidents that may result in injury, damage or loss of property. We urge you to handle with care.
2. This product is suitable for users that have prior operating experience or users no less than the age14.
3. The flying ground suggested is an open space that is legally viable for remote drone control.
4. To avoid the drone losing control, we recommend indoor use only!
5. If you encounter any problems while operating or repairing this product, kindly contact us. We will provide you with the technical support and after-sale service .

BATTERY REPAIR & MAINTENANCE

1. DO NOT mix new and old batteries.
2. DO NOT mix alkaline, standard(carb con-zinc, or rechargeable nickel-cadmium) batteries.
3. Battery should be put in the dry or well ventilated area with a room temperature of about 18-25°C.
4. In order to prolong the battery life,please avoid repeatedly charging or excessive discharging.
5. If the battery needs to be stored away for while, please charge the battery first. The battery needs to be charged to at least 50-60% of its capacity.
6. If you do not use it for more than a month, it is highly recommended that you need to check the battery voltage every month to make sure the voltage is no less than 3V. Otherwise please do not follow step N0.(5).

GET TO KNOW YOUR TRANSMITTER

HOW TO CHARGE DRONE BATTERY

1. Pull the battery out of the drone.
2. Take out the USB charging cable and insert into the battery power port. (Make sure the ports are connected correctly)
3. Connect the USB charger to the computer USB port, then connect the charging socket to the lithium battery. While charging, the LED will light up; when fully charged, the LED will turn off.
4. Reconnect the battery to the drone.

CAUTIONS WHEN CHARGING

1. Charging by using power socket can cause fire! Please always charge the battery by using the USB port from your computer and not a telephone or tablet wall charger.
2. When charging, please put this product in a dry or well ventilated area. Keep it away from any heat sources or explosive products.
3. Before charging, remove the batteries from the drone. Charging process should be supervised by an adult to prevent an accident.
4. After flying, please do not charge the battery if the surface temperature is still not cool. Otherwise it may cause the battery to swell, this could be a fire hazard.
5. Please make sure that you use the original USB charging cable provided. If the battery has been used for a long time, or appears to be swollen, please replace them.
6. If you do not play with the drone for a long time, please remove the battery.

READY TO FLY YOUR DRONE

• Slide open the battery cover on the drone. Insert the battery, connect the battery cable into the drone plug point. Make sure it fits correctly, then slide the battery cover to close. Turn the switch on the drone to ON, and place it down onto a flat surface making sure the drone is facing away from you.
• Make sure the drone is switched on, turn on the controller power switch, and you will hear beeping sounds. Then push the left stick to the top and pull it down to bottom (as photo 1 & 2), the drone will automatically connect with the controller. All the LEDs will flash and stay on. Now it is ready to fly. Click the one key takeoff button (as photo 3) to start your flight!

FLIGHT CONTROL

SPEED CONTROL

The first time you turn on the drone, the initial speed is set to 40%. You will hear one beep. When you press the speed button, you will hear two beeps which will increase the speed level to 60%. Pressing the speed button again you will hear three beeps and this will increase the level to 100%. Pressing again will bring you back to 40% speed and you will hear one beep. Always learn to fly at 40% speed, and then you can increase it as you get better at flying.

FLIGHT ADJUSTMENT SECTION

When you lift your drone into the air, without the use of any control levers, it should hover in one spot. If it doesn’t, you can follow the instructions below to bring your drone back to a perfect hover.

HOW TO LAND YOUR DRONE

• After playing, control the drone to the ground and keep the throttle at the lowest position for 3-4 seconds or until the motor stops working. Finally switch off the transmitter and drone.
• For a fast turn off, press the one key landing button, the drone will slowly land on the ground and motor will shut down.

RESETTING THE DRONE

• Pull the left stick to lower left quarter, and pull the right stick to lower right quarter (as photo), you will hear beeping sound and the LED lights begin to flash and stay on the gyro will auto reset and keep better balance. Please notice that the drone should be put on the flat surface.

HOW TO DO A 360 FLIP

1. Make sure the drone is flying at least 1.5 meters above the floor, or 1.5 meters below a ceiling.
2. Press the flip button on the controller, the controller will make a “beep” sound, then flick the right hand lever in any direction, the drone will flip in that direction.
3. You may need to push up on the Up/Down lever after the flip, if your battery is low on power to keep the drone high in the air after the flip.

HEADLESS MODE

When drone successfully enter the headless mode, the indicator light will flicker repeatedly.

ONE KEY RETURN

BLADE REPLACEMENT INSTRUCTION

The drone comes with replacement blades, if the originals are broken or badly damaged. It is extremely important to use the correct blade (A or B) for replacement. The marking can be found on the blades. Using the incorrect blade will make it impossible to control the drone. (Assembly of the blades: Clip the small cap of the blade, and then aim at the shaft of the motor and press it. It may require a little force. Please be careful so you don’t break it .)

PRECAUTIONS

Adult’s Supervision Required
This product needs to be used in a safe environment in order to avoid electric shock. Users aged 14 or below are better to play it under adults accompanied.

CUSTOMER SUPPORT

If you have any questions about your model or its operation, call BEZGAR Customer Support at +1 833-325-1118 or E-mail: [email protected].

References

• Fast Remote Control Trucks for Adults and Kids | BEZGAR

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>