eufy 318T8422J2 Security Floodlight Cam 2 User Guide
- June 4, 2024
- Eufy
Table of Contents
eufy 318T8422J2 Security Floodlight Cam 2
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
What’s in the Box
Install Floodlight Cam to the junction box outdoors (you need to have a
junction box and wires already installed).
In order to stream video from Floodlight Cam, you need to make sure the Wi-Fi
signal strength is strong at the location you want to install Floodlight Cam.
To avoid risk of shock, injury or death, always be cautious when working with
electricity. Remember, do hire a professional electrician if you are
uncomfortable working with electrical wiring.
Power On the Floodlight Cam Indoors
- Connect Floodlight Cam to a power source, and then wait 1 minute or until the LED indicator blinks red.
Set up the Floodlight Cam
Download the eufy Security app from the App Store (iOS devices) or Google Play
(Android devices).
Login or sign up for a eufy Security account, then follow the onscreen instructions to complete setup.
To avoid risk of shock, injury or death, always be cautious when working with
electricity.
Make sure you can livestream video from Floodlight Cam before mounting.
Mount Floodlight Cam Outdoors
Step 1
Unplug Floodlight Cam.
Step 2
Unscrew the power cord; wire nuts will be used later.
The power cord is not required when mounting the Floodlight Cam outdoors.
Step 3
Shut down the circuit breaker in your house. Switch on/off the lights to make
sure the electricity in your house is properly shut off.
To avoid risk of shock, injury or death, always be cautious when working with electricity.
Step 4
Remove the old Floodlight from the junction box and install the mounting plate
to the junction box.
The junction box and existing electrical wires are required to Floodlight Cam installation.
The
concaved side of the mounting plate must face outwards.
Step 5
- User can hang Floodlight Cam upside down or install it vertically on the wall. Select the installation method that best suits the position of your junction box.
To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.
If you plan to install the Floodlight Cam on the wall, please skip to Step 6.
- For upside down installation, turn the cam down to the end when it’s placed vertically, then turn the camera 180° in clockwise direction.
To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.
Step 6
-
Hang Floodlight Cam on the junction box with the hook provided.
To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring. -
Connect both ground wires(yellow or green) from the junction box and Floodlight Cam, join the wires by using a wire nut.
If the existing ground wire has been connected to the junction box or there’s no ground wire, connect the ground wire of the Floodlight Cam to the junction box or mounting plate directly.
To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.
- Use wire nuts to connect Floodlight Cam wires to the rest of the wires from junction box. Connect the white wire on the Floodlight Cam to the white wire(neutral) from junction box. Connect the black wire on the Floodlight Cam to the black wire(hot) from junction box.
To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.
Step 7
Insert the central screw through the center of Floodlight Cam and screw it
tightly.
Use the central screw cap to cover the central screw to prevent the central screw from rusting.
Step 8
After installation is complete, you can turn the cam knobs on Floodlight Cam
to adjust the camera to your desired angle.
Step 9
Switch on the main circuit breaker in the house.
To check whether Floodlight Cam is operating, check if the LED indicator has
turned solid white.
In case Floodlight Cam is not powered on, switch off the circuit breaker
before checking the wiring of Floodlight Cam.
To avoid risk of shock, injury or death, always be cautious when working with
electricity. Remember, do hire a professional electrician if you’re
uncomfortable working with electrical wiring.
In case Floodlight Cam keeps blinking red, it means the floodlight is not
connected to the Internet. Please make sure the Wi-Fi signal is strong at the
desired location. You may consider moving the wireless router closer to
Floodlight Cam or using a Wi-Fi range extender.
For troubleshooting, check the Help section in the Eufy Security app.
Refer to the app page for what the LED indicator status lights mean.
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation
distance is 20cm.
Notice : Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-800-988-7973
This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU.For the declaration of conformity, visit the Web site
www.eufylife.com
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is -20°C-50°C.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human
body. To maintain compliance with RF exposure requirement, use product that
maintain a 20cm distance between the device and human body.
Wi-Fi Operating Frequency Range:2412~2472MHz Wifi Max Output Power:
16.09dBm(EIRP for 2.4G). Bluetooth Operating Frequency Range:2402~2480 MHz;
Bluetooth Max Output Power: 8.61dBm(EIRP). Anker Technology (UK) Ltd I Suite
B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich,
Germany
This product is designed and manufactured with high quality materials and
components, which can
be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be
delivered to an appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human health and the
environment. For more information on disposal and recycling of this product,
contact your local municipality, disposal service, or the shop where you
bought this product.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.”
This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>