LawMate PV-CHG30i Smartphone Charging Dock DVR User Guide

Table of Contents

LawMate PV-CHG30i Smartphone Charging Dock DVR User Guide

Product Overview

No microphones are available for USA market!
Do not remove serial number sticker! Warranty is invalid if the sticker is tampered.

Insert memory card into memory card slot 11 .
Connect one side of the adapter into 12 , and plug the other side into an electrical outlet.
Slide power switch 1 to turn on the device. Blue LED 3 will be on and system initialization will take around 40 seconds.
After system initialization, with the presence of the red LED 4 , it indicates that the recording mode is on.
To turn on Wi-Fi, slide 7 to the left and orange LED 5 will be blinking. Device is ready for Wi-Fi (P2P) connection. For more details about the P2P and IP connection guide, please refer to IP Quick Guide.
Default
- To set the password & SSID back to default settings, press default button 8 longer than 4 seconds and less than 10 seconds. You will see the red 4/ orange 5/ green 6 LED turning on and off at the same time. After 40 seconds, the presence of the flashing orange LED indicates that the unit is ready to start P2P connection again. (P2P password: 88888888)
- To set all the settings back to factory default, press the default button longer than 10 seconds. You will see the red 4/ orange 5/ green 6 LED turning on and off at the same time. After 40 seconds, all the settings will be back to factory default settings.

Please note that the operation less than 4 seconds will be invalid.

Please note that each time the device is switched to P2P or IP connection, the system initialization will take around 40 seconds.

For Continuous Recording Mode, please swipe 2 to the left.
For Motion Detection Recording Mode, please swipe 2 to the right. After 10 seconds of system initialization, the unit will be ready for motion detection recording. Once the unit detects a moving object, it will start the recording and the red LED 4 will be on.
For snapshot function, please refer to IP Quick Guide.

Beyond being a hidden camera, the unit can actually function as a working smartphone charger. It charges your phone like a normal docking.
Please note that when you try to charge your phone through the unit, the power your phone receives will be less than when connecting to its original charger.
To remove the charging tip (Illustration A), pull back the release catch (a) and take out the charging tip (b).
To install a charging tip (Illustration B), pull back the release catch (c) and insert charging tip (d).

Video files are stored in the memory card, there are two ways to retrieve.

Remove memory card from DVR and insert memory card into a card reader or memory card slot in your PC. Computer detects the storage and user may browse and operate the storage as typical folder directory.
Connect the micro USB end of a USB cable to the device, and the other end to your PC. Computer will detects the storage

Please note that video files will be named as V+year+month +time; e.g. V20210716010101

From the desktop, right-click to open Notepad, create a text file named settime.txt
On the first line of the file, enter date and time information as year. month. day hours. minutes. seconds. For example, suppose the time is July 16, 2021 14:30. Then enter 2021.07.16 14:30:00
Save the file to the root directory of the memory card.
Insert the memory card into the slot, and power on the device. The date and time setting is now completed.

Please note that when date and time setting is completed, the settime.txt file should not be visible when you connect the device to computer again.