SESCOM HUMX2 Professional 2 Channel Passive Hum Eliminator User Manual
- June 9, 2024
- Sescom
Table of Contents
SESCOM HUMX2 Professional 2 Channel Passive Hum Eliminator
PROFESSIONAL 2-CHANNEL PASSIVE HUM ELIMINATOR
The Sescom HUMX2 is a professional 2-channel passive hum eliminator with dual ¼” and XLR inputs and outputs designed to eliminate 60Hz AC signal caused by ground loops. A 1:1 isolating transformer breaks ground loops and makes it nearly impossible for signal lines to pick up the AC hum and noise. The HUMX2 can also act as an unbalanced to balanced signal converter or as a balanced to unbalanced signal converter.
FEATURES
- 2-Channel Professional Hum Eliminator
- Dual 1/4″ and XLR Inputs and Outputs
- Designed to Eliminate 60Hz AC Signal Caused by Ground Loops
- Reduces Ground Loop Hum by Approximately 10dB
- 1:1 Transformer Coupling to Break Potential Ground Loops
- Converts Balanced Signal Into an Unbalanced Signal & Converts Unbalanced Line Signal Into a Balanced Signal
- All Grounds Connected to Chassis
SES-HUMX2 CONNECTIVITY
- Channel1/2 IN: 6.35mm/XLR input connector, connecting to console or microphone amplfier such devices.
- Channel1/2 OUT: 6.35mm/XLR output connector, connecting to headphone amplifier or recorder such devices.
CONNECTION DIAGRAM
SPECIFICATIONS
- Frequency Response: 20Hz – 20kHz
- Distortion: 0.0027% dB at 1kHz
- Total Harmonic Distortion: 0.0029% dB at 2.5kHz
- Crosstalk: > 103dB
- Output Impedance: 600 ohms
- Input Impedance: 1.2 kohm – 18 kohm
- Ground Loop Blocking: -10dB
- Dimensions (LxWxH): 4.5 x 3.25 x 1.62″
- Weight: 1.01 lbs (456 grams)
SERVICE
If your product needs servicing, follow these instructions.
Contact us if your unit is not working properly.
Reach us at sales@sescom.com or by phone at
845-246-1915
Copyright © Sescom. All rights reserved. Specifications and appearance subject to change without notice.
SESCOM
Phone: 845-246-1915
Email: sales@sescom.com
PO Box 720
Mount Marion, NY 12456
www.sescom.com