Guangdong Shuoqiang Electronics GS510 Wireless Headset User Manual
- June 6, 2024
- Guangdong Shuoqiang Electronics
Table of Contents
GS510 wireless headset
Extreme version
Headphone connection instructions
Connect with USB receiver
- Long press the headset power button ****for 2 seconds, release it after the headset light is on, and the power on is successful;
- The headset has been paired with the USB receiver when it leaves the factory, plug the USB receiver into the USB port of the device, and the headset will automatically connect after turning on the headset. After the USB receiver and the headset are successfully connected, the indicator light of the USB receiver will be blue Steady on, the headphone power-on indicator is steady blue;
- If the USB receiver cannot be connected, please confirm whether the headset is connected to your mobile phone. If it is connected to the mobile phone, please disconnect the Bluetooth connection of the mobile phone first, and then insert the USB receiver into the USB of the computer To restart the connection of the headset;
- If the pairing is still not possible, please insert the USB receiver into the USB port of the device. After the device is recognized, the indicator light of the transmitter will flash blue every 2 seconds. Use a needle to press the inside through the small hole of the shell. The pairing button for 2 seconds, the USB receiver enters the pairing state, the indicator light of the USB receiver flashes blue quickly, and the headset is turned off, press and hold the power button ****for 6 seconds to enter the pairing mode and emit the “pairing’ prompt sound, The headset can be paired and connected when it is close to the USB receiver. When the USB receiver and headset are successfully paired and connected, the blue indicator light stays on and the headset power-on indicator light is blue.
Note:
- Power-on fails, please retry after charging.
- 1f you need to restore the factory settings, press and hold the power button for 10 seconds in the shutdown state. After hearing the music, it means that the factory settings have been restored.
Features
Power on/off
In the off state, long-press the power button for 2 seconds, the headset
will automatically turn on;
In the power-on state, press and hold the power button for 3 seconds, the
headset will automatically turn off;
Mode switch
Short press the mode switching key mode once to switch the sound effect
mode;
Music pause/play
Short press the power button ****once to pause/play the music;
Call mode
When a call comes in, short press the power button once to answer the
call;
When a call comes in, short press the power button twice to reject the
call;
During a call, short press the power button ****once to hang up the call;
Wired mode
Insert the 3.5mm audio cable into the AUX interface of the earphone, and
connect the other end to the device to be used.
Note: In wired mode, all functions are disabled except for volume adjustment and microphone function.
Light on/off
Three-click the light touch key to turn on/off the headset light.
Light color switch
Press and hold the light touch key for 2 seconds to switch the light color.
Charge
- When the headset is charging, the battery indicator shows a steady orange light; When the headset is fully charged, the battery indicator shows steady green.
- When the power of the headset is less than 10%, the headset will emit a “Please Charge” prompt, please charge it in time.
Note
- This product is compatible with Microsoft Windows 7/8/10, Apple Mac OS system, Android system, and IOS system;
- If it is not available on the operating system or equipment that is not listed, you can contact the after-sales service for a solution;
- During the use of the product, if there is no sound from the microphone or headset, it may be caused by compatibility problems or improper use, and you can contact the after-sales service to find a solution;
- During the use of the product, if any part is damaged, such as a broken cable, please stop using it and contact the after-sales service for a solution to avoid unnecessarily
- During the use of the product, if the headset does not respond for a long time, you can use a sharp object such as a paper clip to press the headset reset button for 1 second, and the headset can be forced to shut down.
- If you want to know more information, please visit Somic’s official website itsomic.com.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>