LEVITON OSF20 Fixture Mount PIR Outdoor Integral Luminaire Occupancy Sensor User Manual

June 3, 2024
Leviton

OSF20 Fixture Mount PIR Outdoor Integral Luminaire Occupancy Sensor
User ManualLEVITON OSF20 Fixture Mount PIR Outdoor Integral Luminaire
Occupancy Sensor

Description

The Fixture Mount PIR Outdoor Integral Luminaire Occupancy Sensor (OSF20) is designed to be mounted directly into a luminaire and is ideal for indoor or outdoor  locations. The OSF20 offers a sensor and relay in one device. The wiring and housing of the sensor is installed adjacent to the ballast and hidden from view behind the  reflector cover. Only the PIR detector dome lens and locking ring are visible on the exterior of the fixture. The sensor comes with two interchangeable lenses for use in a  360° high bay general area and low bay applications. It also includes an aisle mask accessory.

Applications

Leviton’s Fixture Mount Outdoor Integral Luminaire Occupancy Sensor is designed specifically for pre-wiring and installing inside of luminaire fixtures including:

  • Supermarket meat departments
  • Food processing plants
  • Parking garages

Operation

The OSF20 utilizes passive infrared (PIR) technology with autoON/auto-OFF operation and an adjustable time delay to detect motion within its field of view. A small  semiconductor heat detector resides behind a multi-zone optical lens, making the sensor sensitive to the heat emitted by occupants. This Fresnel lens establishes dozens of  zones of detection. In order to initially trigger the sensor, the source of heat must move from one zone of detection to another. The OSF20 is most effective in sensing motion across its field-of- view.
Once the device senses motion, the sensor will automatically turn the lights ON. When motion is no longer detected, the sensor will conclude that the space is unoccupied.  This will initiate the delay timer. If the delay timer expires and no motion is detected, the lights will turn OFF. If motion is detected, the delay timer will stop and the lights  will remain ON.

Features

  • Easy installation with 7.5” leads allows for easy connection to any ballast
  • Aisle mask accessory included
  • Low voltage 24V model available—requires a separate power supply
  • Passive infrared detection technology for accurate sensing
  • True Zero-Cross relay technology provides maximum contact life and compatibility with electronic ballasts
  • Adjustable time delay located on sensor housing for easy access
  • Aesthetically pleasing design
  • Compact size for tight spaces
  • 20-40’ standard mounting heights for indoor and outdoor use
  • Internal fixture mount reduces number of devices on ceiling
  • Passive Infrared Technology (PIR): the OSF20 uses PIR technology to detect motion
  • Aisle mask: one unit includes interchangeable 360° high-bay (20-40’) and 360° low-bay (8-25’) lenses and an aisle mask  accessory
  • Time delay: the time out occurs when motion is no longer detected by the sensor and the device counts a set amount of time before turning off the load. If the device  sensor detects motion during this ’time delay’, the count resets and the device initiates a new count. The time delay can be adjusted to 30 seconds, 10, 20 and 30 minutes,  respectively.
  • Zero-crossing circuitry: relay uses a zero-crossing circuitry to provide reliable, long-life operation
  • LED: a green LED blinks when motion is detected

Installation

The OSF20 is designed to mount directly into a light fixture, with only the PIR lens being visible. The wiring and housing of the sensor is installed adjacent to the ballast,  hidden from view behind the reflector’s cover.

Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 tech line (8:00AM-10:00PM ET Mon-Fri, 9:00AM-7:00PM ET Sat, 9:00AM-5:00PM ET Sun) 800-824-3005.
©2022 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

Dimensions Diagram

![LEVITON OSF20 Fixture Mount PIR Outdoor Integral Luminaire Occupancy Sensor

Dimensions for Installation

![LEVITON OSF20 Fixture Mount PIR Outdoor Integral Luminaire Occupancy Sensor

Wiring Diagrams

![LEVITON OSF20 Fixture Mount PIR Outdoor Integral Luminaire Occupancy Sensor

Field of View Diagrams

![LEVITON OSF20 Fixture Mount PIR Outdoor Integral Luminaire Occupancy Sensor

Specifications

Electrical 120-347V  Model L o w Voltage Model
Input Voltage 120-230-277-347V 24VAC/VDC
Operational Frequency 50/60Hz
Wire Designation Line-Black, Load-Red, Neutral-  White Line-Black, Load-Red,

Neutral-White; OCC=Blue, PH=Gray
Load Rating| Fluorescent Ballasts: 800VA @ 120VAC, 1200VA @  277  VAC Incandescent: 800W @ 120V, Motor: 1/4  HP Load @ 120V| Input: 20mA Output: 120mA HVAC: 1A, 30VDC
Time Delay| 30 seconds, 10, 20 and 30 minutes
En vir onmental
Operating Temperature Range| -40 to 160°  F  (-40  to 71° C)
Storage Temperature Range| -14 to 60° F  (-25  to 71° C)
Relative  Humidity| 20 to 90% non-condensing
Physical
Size| 3.87” (98.30mm)L x 2.00” (50.80mm)W x 1.12” (28.45mm)D
Color| White
Lead  Length| 7.5” (190.50mm)
Other
Listings| IP65 rated, complies with FCC regulations, NOM certified
Energy Codes| Can be used to comply  with IECC, ASHRAE 90.1, and 2019 Title 24, Part 6 occupancy sensing requirements
Warranty| Limited Five-Year Warranty

Ordering Information

Fixtur e Mount PIR Outdoor Integral Luminaire Occupancy Sensor

C at. No.| Des cription
OSF20-IUW| Fixture Mount PIR Outdoor Integral Luminaire Occupancy Sensor,  360 degree high-bay lens (8-40’), 7.5” wire lead length, 120-230-277-347V; 50/60 Hz; aisle mask, UL listed, IP65 rated
OSF20-ILW| Fixture Mount PIR Outdoor Integral Luminaire Occupancy Sensor,  360 degree high-bay lens (20-40’), 7.5” wire lead length, 24V, aisle mask, UL listed, IP65 rated

Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 tech line (8:00AM-10:00PM ET Mon-Fri, 9:00AM-7:00PM ET Sat, 9:00AM-5:00PM ET Sun) 800-824-3005
©2022 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

Leviton Manufacturing Co., Inc. Lighting & Controls
10385 SW Avery Street, Tualatin, OR 97062 tel 800-736-6682 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 tech line (8:00AM-10:00PM ET Mon-Fri, 9:00AM-7:00PM ET Sat, 9:00AM-5:00PM ET Sun) 800-824-3005
Visit our Website at: www.leviton.com/sensors
©2022 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals