SIRHC LABS 2006-2011 Honda Civic Si 44-Pin Connectors Instructions

June 3, 2024
SIRHC LABS

SIRHC LABS 2006-2011 Honda Civic Si 44-Pin Connectors

SIRHC-LABS-2006-2011-Honda-Civic-Si-44-Pin-Connectors-
product

WIRING

The 2006-2011 Civic Si ECU is in the engine bay next to the battery. The ECU has three 44-Pin connectors (A, B, C). RPM, vehicle speed, and throttle position can all be accessed at the A connector.SIRHC-LABS-2006-2011-Honda-
Civic-Si-44-Pin-Connectors-fig-1

  • The Cortex EBC wiring harness can be connected to ECU connector A as outlined in the following table. RPM and vehicle speed signals are required for boost by gear applications.

CORTEX EBC TO ECU CONNECTIONS

CORTEX SIGNAL| CORTEX WIRE COLOR| ECU SIGNAL| ECU PIN| ECU WIRE COLOR
---|---|---|---|---
Engine Speed| Pink| NEP (Engine Speed Pulse)| A-28| Blue
Vehicle Speed| Green| VSSOUT (Vehicle Speed Output)| A-29| Blue
General-Purpose| Orange| APSA (Accel Pedal Position A)| A-17| Yellow

VEHICLE CONFIGURATION SETTINGS

RPM DETECTION

  • Mode: RPM
  • Pulses Per Cycle: 4
  • Rotations Per Cycle: 2

SPEED DETECTION

  • Mode: VSS
  • Pulses Per Mile: 6,000
  • Scale Factor: 1/32
  • Hz Limit: 12.5 KHz

GEAR DETECTION

  • Follow the steps in the Setup – Gear Detection section of the Help utility to determine the correct EVS ratio settings for gear detection.SIRHC-LABS-2006-2011-Honda-Civic-Si-44-Pin-Connectors-fig-4

THROTTLE POSITION DETECTION

  • Mode: TPS
  • Closed TPS Voltage: 0.50
  • Open TPS Voltage: 4.70
  • SIRHC Labs 2022

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals