EAST WEST FURNITURE LGGR7 Logan 7 Piece Set Instruction Manual
- June 14, 2024
- EAST WEST FURNITURE
Table of Contents
ASSEMBLY INSTRUCTION
VIDEO
SKU: LGT
http://cdn.eastwestfurniture.net/VID/LGT.mp4
VIEW ON SMARTPHONE
- Open Camera apphttp://cdn.eastwestfurniture.net/VID/LGT.mp4
- Postion camera to the QR codehttp://cdn.eastwestfurniture.net/VID/LGT.mp4
- Click on the pop-up link
VIEW ON Computer
175 Southbelt Industrial Dr
Houston, TX 77047
Email: info@eastwestfurniture.net
DescriptionDimensionCube Size
(Top)
Cube Size
(Leg)| : LOGAN COUNTER HEIGHT TAB: W.40″x D.60″(78″)x H.36″
: 62.5”x42.5”x 6.5”
: 36.9”x13.7”x4”| 18” CENTER LEAF
NW: 96.8 LBS
GW: 101.2 LBS
NW: 33 LBS
GW: 35.2 LBS
---|---|---
LOGAN COUNTER HEIGHT TABLE 18” CENTER LEAF
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed
for easy assembly and constructed fodurability. Please take the time to read
and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have
come loose inside the carton during shipmentPlease separate, identify, and
count all parts and metal hardware. Compare with part list to be sure all
parts are present. If hardware is missing or you have difficulty assembling
this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from beingscratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
NO| Description| Qty| Sketch| NO| Description|
Qty| Sketch
---|---|---|---|---|---|---|---
A| Top| 1| | B| Table Leg| 4|
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware:
NO| Description| Qty| Sketch| NO| Description|
Qty| Sketch
---|---|---|---|---|---|---|---
1| Bolt
(M8x70)| 8| | 2| Lock washer
( 4)8.5x4D1 1 mm)| 8|
3| Flat Washer
( 4)8.5×4)19mm)| 8| | 4| Allen key
(M4mm)| 1|
LOGAN COUNTER HEIGHT TABLE 18” CENTER LEAF
STEP 1
Attach legs (B) to the top (A) with Bolts (1) and washers (2), (3). Tighten
with the Allen Key (4). STEP 2
Unlatch 2 end pieces of table top by the latches underneath table top. Pull
the 2 ends of the table top apart. STEP 3
Unfold the butterfly leaf with the apron at both ends straightened up as shown
on the Step 3. Place flattened butterfly leaf at the center of the table. Then
push two end pieces inward making sure all pins & holes aligned. Latch them
together by the 4 latches underneath table top.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>