ULTIMA Tapio Pro 2.0 Channel Soundbar User Manual

ULTIMA Tapio Pro 2.0 Channel Soundbar

Thanks for purchasing Ultimea Tapio I Pro.
This guideline aims to offer you details on setting up this sound bar so that you can enjoy the ultimate sound experience.

ACCESSORIES

1. Ultimea Tapio I Pro

2. Remote Control
   

3. User Manual
   

4. Power adapter
   

5. Optical cable
   

6. AUX audio cable
   

7. Wall mounting bolts
   

DIAGRAM (BUTTONS, PORTS & INDICATOR)

1. Power: Short press to turn on, long press to turn off.
   Mode: Turn ion and then press to switch the mode.

2. Short press for next song.
   Long press for increasing volume.

3. Short press for previous song
   Long press for decreasing volume.

4. Play/Pause: Play/Pause in BT and USB mode.

5. ARC: Use to connect compatible devices using a HDMI cable (not provided).

6. OPTICAL IN: Use to connect compatible devices using an optical cable {provided).

7. USB IN: Connect to the flash drive for playing MP3/WAV files (FAT32 format and 64GB max)

8. AUX IN: Connect to the compatible devices via the 3.Smm-RC Stereo jack cable (provided)

9. DC IN: Use to connect the DC power supply.

MODE

PLACEMENT

1. Table Placement
   
   Placement
   Table placement
   Place the sound baron a solid surface.

2. Wall Mounted

Remote Control

Battery installation

Use remote control
The working range of remote is +/-30° in both Vertical and Horizontal Direction.

| Short press to turn on,long

press to turnoff

| MUSIC| Music Mode/EQ 1
---|---|---|---
| Mute/ Recover the Volume| MO V IE| Movie Mode/EQ 2
BT| Got BT Mode| NEWS/Game| News mode is displayed as EQ3/ Game mode is displayed as EQ4
HDMI| Goto HDMI Mode| OPTICAL| Go to Optical Mode
DYNAMIC| To enhance the dynamic effects of different EQ modes such as Music/Movie/News/Games/3D,suitable for scenes of needing more powerful sound effects.
Hi-Fi| To adjust the sound effects on different EQ Modes such as Music/Movie/News/Games/3Dto get clearer sound, suitable for some quiet scenes such as dialogue.
AUX/USB| Go to Aux/USB Mode| BASS+| Increase the Bass
| Volume Up| BASS-| Decrease the Bass
| Volume Down| 3D| 3D Surround sound on/off, can only be turned on in movie mode
| Previous Track| ►M| Next Track
| Play/Pause| O /LEDOFF| Short press button for Single loop or Full loop in USB mode /Short press to turn on/off the LED indicator
in standee mode.

USING YOUR SOUNDBAR

1. Connect to Power

2. Connect to 1VUse Remote Control or Button on Sound bar to change modes.
   Note:

3. Prior to usage, check whether your TV has HDMI ARC, Optical and Aux Output.

4. Prior to using HDMI ARC connection, please ensure your TV supports HDMI ARC and HDMI Cable is not lower than HDMI 1.4.

5. Turn on PCM settings of your TV When connected in Optical Mode in case there is no sound.

6. 32 is the maximum volume of the sound bar.

7. Connect to Other Device
   Need to purchase one 3.Smm-3. Smm audio cable if there is only 3.5mm female output on your Devices.

8. Connect to Bluetooth Device
   Short press “BT” button on the remote control to enter Bluetooth mode.
   The BT b~ will flash when entering the pairing mode, and bl: will stop flashing once successfully paired

SPECIFICATION

Safety Instructions

1. Avoid dropping
2. Do not disassemble
3. Avoid extreme temperatures
4. Don’ t use the device outdoors during thunderstorms
5. Use original or certified cables
6. Don’ t use any corrosive cleaner/ oil to clean
7. The products should not be exposed to dripping or splashing water

FCC Regulatory Compliance

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Correct Disposal of This Product
  (Waste Electrical& Electronic Equipment)
This mark shown on the product or its packaging, indicates that this product should not be disposed with other household waters at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact.
This product should not be mixed with other commercial wastes for disposal.

EU Representative: SHUNSHUN GmbH
Address: Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany
UK Representative : UK CROSSBORDER LIMITED
Address: 7 Bell Yard London WC2A 2JR, UK
Manufacturer: Gudang Dong Sub steno Technology CO. ,Ltd.
Address: 2508, Building4, Tian Cloud Park Phase II, Bantian Street, Longgang District, Shenzhen, China 518100

• support@www.ultimea.com
• www.ultimea.com

References

• ULTIMEA: Home Theater Solutions - Projectors and Soundbars
• Ultimea ­– Affordable Soundbars, Projectors and Home Audio Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>