CTA PAD-PARASW Premium Security Swan Neck Stand Instruction Manual
- June 13, 2024
- CTA
Table of Contents
Paragon: Premium Security Swan
Neck Stand for 7-14 inch Tablets
PAD-PARASW
INSTRUCTION – MANUAL
PAD-PARASW Premium Security Swan Neck Stand
Package Contents:
Instructions:
- Assembling the Base Stand 1A.Take the base plate (J) and attach the base pole (H) to setup the bottom portion of the floor stand. Rotate in (4) screws (E) using the provided tool (M) until securely tightened.
- Setup in Floor Stand, Kiosk or Tabletop Mode 2A. Use a combination of body pole (I), (H) and swan neck (G) to create the preferred setup of Floor Stand, Kiosk or Tabletop. When the proper desired pieces are linked, tighten the joint as shown with the provided tool (M). A combination of (G, I, H, J) for floor stand, (G, H, J) for kiosk mode and (G, J) for tabletop setup as shown above. Loosen joint connection for swivel adjustability.
- Assembling VESA Plate to Stand 3A. Align the VESA plate (K) holes to curved swan neck (G) holes. Then insert the (4) screws (J) and rotate in with the provided tool (M) until securely tightened.
- Assembling Holder to VESA Plate & Stand 4A. Align the tablet holder (A) holes with the VESA plate (K) holes which is now attached to the body. Using the (4) screws (D) and rotate in using provided tool (M). From behind hold the hex nut (C) with your hands. Rotate in screws until securely tightened.
- How to Insert a Tablet into Holder 5A. Press and hold on the release button as shown, open the arms of the holder as wide as the diagonal of your tablet. If security button is down, you can not flex the holder arms and you can’t push down the release button. You need to unlock the security press lock first with key. (shown at the bottom of page) 5B. Place the foam pad piece (L) followed by the tablet. The tablet should sit snug and not have any gaps or wiggle. If it doesn’t sit snug, you should either use a thicker foam piece OR a combination of foam pieces. 5C. Close arms to adjust frame to secure your tablet as shown. Press down the security press lock to lock your holder in place. (See graphics at the bottom of the page)
Foam Adjustability
Use the foam to adjust the thickness between the tablet and the stand
Paste Method
- Tear off the backing paper on the foam pad.
- Stick the foam pad to the frame as shown in the right picture.
Rotation / Tilt Adjustability
Tablet holder provides portrait / landscape orientation flexibility. There is
also tilt flexibility with the joint behind the VESA plate.
Loosen screw to adjust tilting position and tighten at desired position.
How to Setup Cable Routing
How to Lock / Unlock your Security Holder
Tablet Holder needs to be in unlocked mode before you can push down the other release button and flex the holder arms. If the security press lock button is popped up, then you know you are in unlocked mode. If it is down, you are in locked mode. To get out of locked mode, simply insert the key (provided) (B) and rotate a full 360 counterclockwise. You should hear a click.
36 Taaffe Place Brooklyn, NY 11205
support@ctadigital.com
888-733-4448
www.ctadigital.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>