Taco Comfort 007e ECM High Efficiency Circulator Instruction Manual

Taco Comfort 007e ECM High Efficiency Circulator

INTRODUCTION

The Taco 007e® is a variable-speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. It is ideal for hydronic systems zoned with circulators or zone valves, or used on potable water systems for domestic water recirculation. The 007e delivers the performance equivalent of the classic 007, plus the reliability and easy installation that made the 00® famous. Install it, forget it.®

Features & Benefits

• 10’ Shut-off head, 16 gpm max flow
• ECM performance equivalent to the legendary 007 circulator
• High-efficiency ECM motor uses up to 85% less electricity
• SureStart ® automatic unblocking and air purging mode
• BIO Barrier® protects pump from system contaminants (Cast Iron only)
• Green Mode active system monitoring and automatic power optimization
• Nut-grabber feature on flanges for easier fit-up
• Dual electrical knockouts, 6” stranded wire leads included for easy wiring
• Integral Flow Check (IFC®) included
• Double insulated — No ground wire required
• Whisper quiet operation
• Cast Iron models available with standard or universal flange
• Stainless Steel models available with universal flange or 1” union connection
  • Customizable 1/2” & 3/4” union fitting sets available in sweat, NPT or press (Sold Separately)

Multi-color LED showing operating mode and error code diagnostics

• Orange LED:
  Indicates 007e is running normally

• SureStart® LED:
  Indicates the innovative SureStart® automatic unblocking and air purge is active

• Green Mode LED:
  Indicates the 007e is running in Green Mode for power optimization

Applications & Performance

Typical Applications for Closed Loop Hydronic Heating Systems

Typical Installation for Open Loop Hot Water Recirculation Systems

Performance Curves

The 007e performance is ideal for hydronic zoning to reduce velocity noise or banging of zone valves closing against high head pressure circulators. The 007e has an additional Green Mode operating curve that will self-adjust automatically.

Green Mode: After 7 days of constant running, the 007e will adjust its curve to Low Proportional Pressure curve for power optimization.
(See Green Mode curve on the left) LED will change to green. The 007e will reset to the original normal mode curve every time it cycles OFF.

Specifications

• Max. Shut-off Head: 10 feet

• Max. Flow: 16 gpm

• Max. Operating Pressure:

  • Cast Iron: 125 psi (8.6 bar)
  • Stainless Steel: 150 psi (10 bar)

• Max. Water Temp: 230°F (110°C)

• Min. Water Temp: 36°F (2°C)

• Electrical specifications:

  • Voltage: 120V, 60 Hz
    Single phase

  • Max. Operating Power: 44W

  • Max. AMP Rating: 0.54

• Cast iron casing is suitable for closed-loop systems only

• Stainless steel casing suitable for potable water and open loop systems

• Not suitable for chilled water

• Taco circulator pumps are for indoor use only

• Acceptable for use with water or a maximum of 50% water/glycol solution

Materials of Construction

• Casing: ………………………….Cast Iron or
  • …………………………………………Stainless Steel
• Stator Housing: ………….Composite
• Cartridge: ……………………..Composite
• Impeller: ……………………….Composite
• Shaft: ………………………………Ceramic
• Bearings: ……………………….Carbon
• Thrust Bearing: …………..Ceramic
• O-Ring & Gaskets:……..EPDM

Applications

The 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. Its ECM performance is equivalent to the legendary 007 circulator. It is ideal for hydronic systems zoned with circulators or zone valves or used on potable water systems for domestic water recirculation. The 007e is not suitable for chilled water systems.

Pump Dimensions & Weights

Model Number| Connection Type| Casing| A| B| C| D| F| G| Ship Wt.
---|---|---|---|---|---|---|---|---|---
in.| mm| in.| mm| in.| mm| in.| mm| in.| mm| in.| mm| lbs.| Kg
007e-2F2| Standard| CI| 6| 152| 4-1/8| 104| 3-3/16| 80| 3-1/4| 82| 5| 126| 6-3/8| 161| 5.8| 2.6
007e-2F4| Universal| CI| 6| 152| 4-1/8| 104| 3-3/16| 80| 3-1/4| 82| 5| 126| 6-3/8| 161| 6| 3.7
007e-SF4| Universal| SS| 6| 152| 4-1/8| 104| 3-3/16| 80| 3-1/4| 82| 5| 126| 6-3/8| 161| 5.5| 2.5
007e-SU| Union| SS| 5-1/6| 131| 4-1/8| 104| 3-3/16| 80| 3-1/4| 82| 5| 126| 5-1/8| 130| 4.6| 2.1

Connection Types

Electrical Data

Model| Volts| Hz| Ph| Max. Amps| Max. Watts| RPM
---|---|---|---|---|---|---
All Models| 120| 60| 1| .54| 44| 1590-4830
Motor Type| ECM, Permanent Magnet, Thermally Protected

Taco Inc. , 1160 Cranston Street, Cranston, RI 02920 / 401-942-8000 / Fax 401-942-2360 Taco (Canada) Ltd., 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8 / 905-564-9422 / Fax 905-564-9436

References

• Taco Comfort Solutions | Leader in Hydronics and Pump Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>