SEALEY APWSR01 Heavy-Duty Wall Mounted Storage Rack User Guide

: June 12, 2024
: SEALEY

Table of Contents

SEALEY APWSR01 Heavy-Duty Wall Mounted Storage Rack
Product Information
Product Usage Instructions
SAFETY
INTRODUCTION
SPECIFICATION
CONTENTS
ASSEMBLY
MAINTENANCE
ENVIRONMENT PROTECTION
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY APWSR01 Heavy-Duty Wall Mounted Storage Rack

SEALEY-APWSR01-Heavy-Duty-Wall-Mounted-Storage-Rack-
product

Product Information

Product Name: Heavy-Duty Wall-Mounted Storage Rack
Model Number: APWSR01
Overall Size (W x D x H): 1218 x 600 x 650mm
Capacity: 100kg
Features: Sturdy steel construction, supplied with hardware pack
Intended Use: Ideal for workshops, garages, and warehouses for storing a large variety of items

Product Usage Instructions

SAFETY:

Ensure Health & Safety and local authority regulations are adhered to when assembling and using this rack.
Locate the rack in a suitable area where it will not be an obstruction.
Keep the general area clean, uncluttered, and ensure there is adequate lighting.
Mount the rack on a flat and solid wall such as breeze block that is strong enough to hold the fully laden rack.
The rack should be firmly secured to the wall in a suitable location.
Please ensure suitable fixings are used for the type of wall you intend to mount this shelf.
Do not attempt to wall mount the rack on your own. Obtain assistance or use manual handling equipment.
Wall mount the rack at a height that minimizes the risk of injury when used.
Keep children and unauthorized persons away from the storage area.
Do not use the rack for any purpose other than that for which it is designed.
Do not site the rack outdoors.
Do not get the rack wet or use in damp or wet locations or areas where there is condensation.
Do not clean the rack with any solvents or abrasives which may damage the coated surface.
Do not overload the rack.
Ensure that the rack is properly and firmly assembled and installed before loading it.

ASSEMBLY:

MOUNT BRACKETS ONTO THE WALL

Step 1A: Mark out and drill holes in the wall for the anchors. Pay attention to the distance between the holes.
Step 1B: Use the 4pcs of self-tapping screws and 4pcs of washers to fix the left and right side brackets onto the wall.

ASSEMBLE THE FRAME

Step 2A: Fix the 4 frame connectors to the two long beams with M5 screws.
Step 2B: Fix the two long beams to the two brackets with M5 screws.
Step 3: Slot the two cross beams into the two long beams. Make sure they are properly located.
Place the wire shelf onto the frame.

The product is now ready for use.

MAINTENANCE:
No specific maintenance instructions were provided. Please refer to general maintenance guidelines for similar products.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using this rack.
Locate in a suitable area where it will not be an obstruction.
Keep the general area clean, uncluttered and ensure there is adequate lighting.
WARNING! Mount on a flat and solid wall such as a breeze block that is stro ng enough to hold fully laden rack.
The rack should be firmly secured to the wall in a suitable location.
Although a generic fixing kit has been provided please ensure suitable fixings are used for the type of wall you intend to mount this shelf.
DO NOT attempt to wall mount the rack on your own. Obtain assistance or use manual handling equipment.
Wall mount the rack at such a height that minimizes the risk of injury when used.
Keep children and unauthorized persons away from the storage area.
DO NOT use the rack for any purpose other than that for which it is designed.
DO NOT site the rack out of doors.
DO NOT get the rack wet or use in damp or wet locations or areas where there is condensation.
DO NOT clean the rack with any solvents or abrasives which may damage the coated surface.
DO NOT overload the rack.
Ensure that the rack is properly and firmly assembled and installed before loading it.

INTRODUCTION

Heavy-duty wall-mounted storage rack ideal for workshops, garages, and warehouses. Features sturdy steel construction and is supplied with a hardware pack. Suitable for storing a large variety of items with weight capacity of 100kg. Overall size: 1218 x 600 x 650mm.

SPECIFICATION

Model No.:……………………………………………………. APWSR01
Capacity:…………………………………………………………….. 100kg
Overall Size (W x D x H):…………………..1218 x 600 x 650mm

ASSEMBLY

MOUNT BRACKETS ONTO THE WALL

Step 1A

Mark out and drill holes in the wall for the anchors. Pay attention to the distance between the holes.

Step 1B

Use the 4pcs of self tapping screws and 4pcs of washers to fix the left and right side brackets onto the wall.

ASSEMBLE THE FRAME Step 2A
Fix the 4 frame connectors to the two long beams with M5 screws.

Fix the two long beams to the two brackets with M5 screws.

Step 2B

SEALEY-APWSR01-Heavy-Duty-Wall-Mounted-Storage-Rack-
fig-8

Slot the two cross beams into the two long beams. Make sure they are properly located.

Step 3

MAINTENANCE

Regularly check fixings and mountings are firmly fitted and that the rigidity and security of the rack are not compromised.
Wipe clean with a damp cloth.
- DO NOT use chemical or abrasive cleaners as this may result in damage to the surface.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and component parts without prior notice.

Important:
No Liability is accepted for the incorrect use of this product.