H Koenig mxk30 3-in-1 Blender Instruction Manual

June 5, 2024
H Koenig

mxk30 3-in-1 Blender
Instruction Manual

H Koenig mxk30 3 in 1 Blender

H Koenig mxk30 3 in 1 Blender - qr code

http://goo.gl/eBPIQV

Thank you for choosing H.Koenig Blender. In order to let the product better working for you, please read the instruction before using it. Please put away well the instruction after reading for consulting in later days.

SAFETY PRECAUTIONS:

  • Read all the instructions before using the appliance. Keep these instructions for future reference.

  • Misuse or improper handling may cause problems in the appliance and cause injury to the user.

  • The unit shall only be used for the purpose for which it has been designed. No liability shall be accepted for damages arising from misuse or improper handling.

  • Before plugging in the appliance to the mains, check whether the supply and voltage correspond to those indicated on the bottom of the appliance.

  • Do not put the appliance or the power plug in water or any other liquids. In the event of the appliance falling in water, disconnect immediately from the mains supply and take it to an authorized service agent for repair before reusing.
    Electric shock hazard exists.

  • Do not attempt to open the blender motor casing. Do not insert any type of object into the blender motor casing.

  • Do not use the appliance with wet hands, on a wet floor, or in a damp environment.

  • Do not hold the power plug with wet or damp hands.

  • Regularly check whether the plug or Power cord is damaged. If damaged, contact the manufacturer or an authorized service agent to have the power cord and the plug replaced in order to prevent hazards.

  • Do not use the appliance, if the power cord or the plug is damaged or if the unit falls on the floor, or if it has been damaged in any other way. In such cases, return the unit to the technical service center to check and repair if necessary.

  • Do not attempt to repair the appliance yourself. Electric shock hazard exists.

  • Do not leave the power cord hanging from sharp edges and keep away from hot objects and flames.

  • Place the unit on a firm, level, heat resistant surface, keeping it away from open flames (like a gas oven) and keep it out of the reach of children.

  • This appliance is not suitable for commercial use or for outdoor use.

  • Unplug the appliance when not in use and also unplug it before cleaning.

  • Caution: the appliance is in standby mode while it remains connected to the main supply. Keep out of reach of children or persons requiring supervision.

  • Switch off the unit before disconnecting the power plug.

  • Use only the manufacturer’s spare parts.

  • Never move the unit by pulling the power cord.

  • Do not remove individual components from the blender motor casing.

  • If the power cord is damaged, it must be replaced by the manufacturer or an authorized service agent or by a qualified technician, to prevent hazards.

  • Unless supervised by an adult, children, or other persons whose physical, sensory, or mental condition prevents them from using the appliance safely are not permitted to use this product. Children should be supervised to ensure they do not play with the product.

  • Always use the blender with the lid securely in place.

  • Caution: blades are very sharp, care must be taken when using the unit or cleaning it.

  • This device is not intended for use by persons with reduced capacity on the physical, mental or sensory or lack of experience and knowledge (including children), unless he has them was asked to monitor or if they have had instructions on the use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the device.

  • If the power cord is damaged, it must be replaced with after-sales service to avoid any danger.

  • This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely, and are fully aware of the dangers involved.

  • Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.

  • Keep the appliance and its power cord out of reach of children under 8 years of age.

  • When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock, and/or injury in the event of misuse.

  • Make sure that the voltage rating on the typeplate corresponds to the main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit.

  • Never leave the unit unattended while in operation.

  • The device must not be used if it has been dropped, if obvious signs of damage are visible or if it has leaks.

  • Please keep this document at hand and give it to the future owner in case of transfer of your device.

  • Do not use outside.

  • The device is not intended to be operated by external timer means or a remote control system.

DESCRIPTION OF PARTS:

1. Measuring Cup 8. Power cord and plug
2. Lid 9. Anti-slip rubber base feet
3. Glass Jar 10. Speed selector switch
4. Rubber seal 11. Speed adjustment panel
5. Blade assembly 12. Function buttons
6. Jar base 13. Upper base of the housing
7. Motor housing

ASSEMBLY AND USE

  1. Make sure the unit is switched off and do not plug it in before assembling.
  2. Then fix the glass jar onto the motor base and make sure it is securely fixed to the base.
  3. Fill the glass jar with the food you wish to blend and make sure the jar does not overflow with liquid. The maximum capacity of liquid should not exceed 1500 ml.
  4. Never use the unit without putting food in the jar.
  5. Place the lid securely on the glass jar.
  6. Insert the measuring cup in the opening of the lid and turn counter-clockwise to lock it in position.

HOW TO OPERATE THE BLENDER

  1. Before using the blender, you must clean the glass jar with hot water as follows:
    a) Turn the speed selector switch to position “OFF” in order to make sure the unit is turned off.
    b) Remove the lid with a measuring cup
    c) Fill 700-1000ML hot water into the glass jar and then switch on the appliance for about 20 seconds, switch off the and then empty the glass jar before unplugging the unit.
    d) Clean the measuring cup and lid with a soft damp cloth.

  2. . Make sure the speed selector switch is turned to the “OFF” position and then plug the blender into a mains supply.

  3. Place the food you wish to blend in the glass jar. Please note the unit is equipped with two safety devices and the
    blender does not operate if the glass jar is not fixed securely to the motor base.

  4. Place the lid on the glass jar and close tightly. Insert the measuring cup in the hole of the lid and carefully turn counter-clockwise to lock it in position.

  5. Fix the glass jar onto the motor housing. Turn the Speed Selector switch to the ‘ON’ position. The blue light around the speed selector switch or speed adjustment panel indicates that the appliance is connected to the main supply.
    The blender may now be used as normal.

  6. If you use the grinder, place the coffee beans and similar foods such as dry soybean, dry corn, etc in the grinder glass container. The number of coffee beans must be less than 60% of the total capacity of the grinder glass container. Place the grinder blade assembly and the grinder rubber seal on the grinder base and firmly fix it to the grinder glass container. Fix the grinder onto the top of the motor housing. Coffee beans may now be ground as normal.

  7. Please note there are three function buttons, which is “ SMOOTHIE”,” ICE”, and” PULSE”. To use these function buttons, you must turn the speed selector switch to the “ON” position and press one of the function buttons. The button will light up indicating that the function is working.

  8. To select speed, turn the speed selector switch between the “MIN” (low power speed) and “MAX” (high power speed) positions in order to achieve the required speed.

  9. Use the appliance for a maximum of 1 minute continuously and wait for 3 minutes before using it again. For the grinder, you must work the appliance for not more than 40 seconds and rest at least for 1 minute before the next work.

FUNCTION BUTTONS

  1. SMOOTHIE
    The blade turns at high speed, suitable for smooth blending. You can use these function buttons if there is much food or hard food in a glass jar.

  2. ICE
    The blade turns at high speed; it operates for 1 second and shuts off for 0.5 seconds, perfect for crushing ice. You can use this function button to crush ice.

  3. PULSE
    The unit operates only when the pulse button is pressed and it shuts off once the button is released. The blade turns at high speed. You can use this function button at the beginning of the continuous blending.

  4. MIN
    The blade turns at low speed. You can use this function button to blend soft food or less food.

  5. MAX
    The blade turns at high speed. You can use this function button to blend hard food or much food.

  6. ON
    The unit is switched on and the “SMOOTHIE”, “ICE”, and “PULSE” functions can be used.

  7. OFF
    The unit is switched off.

SPEED SETTINGS

Low: For low-power use with liquids.
High: For a more solid consistency for blending liquids and solid foods.
Pulse: For softening ice cream; short, powerful pulse movements. To use this setting you must hold the speed selector
switch in the “ON” position and then press the ‘’PULSE’ button.
(Caution: Maximum capacity of the glass jar is 1.5L).

USEFUL TIPS

For the best results when blending solid ingredients, place small portions of the ingredients in the glass jar a little at a time instead of putting a large quantity all at once. For example, if you want to blend carrots, you should add some water into the glass jar at the same time. And the ratio of the quantity of carrot and water is2:3. That is to say, if you want to blend the maximal capacity of a mixture of carrots and water, the carrots are not more than 600g, and the water is about 900g (0.9L).

  • If you are blending solid ingredients, cut them first into small portions (1.5-2cm).
  • When blending solid ingredients, start by adding a small quantity of liquid. Gradually add further quantities of liquid through the lid opening.
  • Always hold the blender top steady with your hand while the appliance is operating.
  • Proceed carefully when blending thick liquids.
  • To blend solid ingredients or very thick liquids we recommend you use the “Pulse” setting to prevent the blades from sticking.
  • If you want to crush ice, the quantity of ice in a glass jar is not more than 12pcs, and the size of the ice is not more than 202020mm.

CAUTION
If the glass jar is filled with too many ingredients, the blades may not spin freely thus preventing the blending cycles from operating correctly. If this happens, switch off the unit and unplug from the socket. Empty some of the contents and then switch on again.

CLEANING AND STORAGE

Warning: Switch off the unit and then unplug the power cord before cleaning to prevent electric shocks and other hazards.

  1. In addition to this, you should read the “Safety precautions” section at the beginning of these instructions.
  2. Do not clean the motor housing, the power cord or the plug with water.
  3. Clean the motor housing with a soft, damp cloth and wash with a mild detergent.
  4. Half-fill the glass jar with hot water and a small amount of washing liquid. Leave the unit to operate at maximum speed until the glass jar is clean (maximum 1 minute).
  5. You know the jar base can be separated from the glass jar, you can turn the jar base in a counter-clockwise direction and remove the blade assembly together with the rubber seal. Then you can clean the blade base and rubber seal with a soft, damp cloth or wash with mild detergent. CAUTION: The blades are very sharp. Care must be taken when cleaning.
  6. Clean the grinder by half-filling the grinder glass container with hot water and a little washing liquid; fix the grinder onto the top of the motor base. Leave the unit to operate at maximum speed until cleaned (Maximum 30 seconds). Then use the water to clean all grinder components.
  7. Dry all components well before using them again.
  8. Never use abrasive detergents.
    • Never use aggressive cleaning agents.

Warning:
Do not touch the sharp blade. When clean, please wipe by dishcloth, to avoid accidentally injure.

SPECIFICATION

Rated voltage;220-240V,50/60Hz
Power: 700W
Capacity: 1.5L
Operating time: 1 minute
Maximum temperature of the blender: 70 °

NOTE :

  1. Unit suitable for household.
  2. Do not use it for commerce. Otherwise, the maintenance service will be invalid.

ENVIRONMENT

CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.

Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin – 77290 Mitry Mory – France
www.hkoenig.com[email protected][email protected] – Tél: +33 1 64 67 00 05

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

H Koenig User Manuals

Related Manuals