Feiyu Technology Vcam3S Remote Control Handle User Guide
- June 15, 2024
- Feiyu Technology
Table of Contents
**Feiyu Technology Vcam3S Remote Control Handle User Guide
**
Connection
USB-C connection
Put the dovetail slot which at the button of Feiyu Pocket 3 stabilized camera aim to the convex slot of remote handle, and slide in along the slot to connect the USB-C port. Then uers can control the camera through the remote handle after power on.
Bluetooth connection
Before using for the first time, please pair the remote handle with camera.
Connect the remote handle with camera through USB-C port, and they will be
paired automatically, after power on.
After they are paired successfully, detach the remote handle and the
stabilized camera, then the remote handle can control the camera wirelessly.
Overview
- Touch screen
- USB-C charging port
- Joystick
- Shutter cutton
- Zoom button
- Microphone
- 1/4 inch thread Hole
- USB-C port cover
- Power button
- Gimbal mode button
- Wrist strap Hole
- Gimbal connecting plug
Start to Use
Charging
Connect USB-C cable with charging port to charge remote handle.
We recommend that you charge your handle at least once a month.
Charging Status| While Working (Screen status)| While OFF
(Indicator status)
---|---|---
Charging| Display| Red light is on
Complete| Disappear| Green light is on
Button Operations
Power Button
Long press for 1s: Power ON/OFF
Single tap:
- Switch among video/ Photo mode/ Recently used function
- Return to the previous menu
Joystick
Push: Control the movement of the tilt and pan axes
Joystick
Push: Control the movement of the tilt and pan axes.
Gimbal mode button
Single tap: Follow mode/All follow mode/Pan mode (Switch in turn)
Double tap: Recenter
Triple tap: Enter/exit selfie mode
Press and hold: Enter lock mode
Shutter Button
Single tap: Start/stop recording/Take photo/ Return to the home page.
Zoom button
Slide up (T): z00min
Slide down(W): zoom out
Specifications
Product name: Remote Handle for Feiyu Pocket 3
Product model: FeiyuVCAM3SRH
Battery Capacity: 750mAh
Charging Time: 1.2h
Weight: 73g
Product Size: 105.3*30.8″23.1mm
List :Remote Handle x 1, USB-C Cable x 1, Portable bag x 1, Wrist strap x 1, Manual x 1
FCC regulatory conformance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interferen
- This device must accept any interference received, includ interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that t which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.
RF Exposure
The SAR limit of USA (FCC) is 4.0 W/Kg averaged over ten gram of tissue.
Device has also bee tested against this SAR limit, the testing distance of
limbs is 0mm.
Guilin Feiyu Technology Incorporated
Company
www.feiyu-tech.com
[email protected]
+86 773-2320865