fri-jado MD Premium SQ Profile Hot Food Case User Manual
- June 4, 2024
- fri-jado
Table of Contents
fri-jado MD Premium SQ Profile Hot Food Case
KEEP THIS USER MANUAL FOR FUTURE USE
© 2022 Fri-Jado B.V., Oud Gastel, The Netherlands.
We advise you to contact your supplier for the guarantee period and
conditions. Further we refer to our General Terms and Conditions for Sales and
Delivery that are available upon request.
The manufacturer does not accept any liability for damage or injury caused by
failing to adhere to these regulations or by not observing the usual caution
or care in actions, operation, maintenance or repair activities, even if not
explicitly described in this manual.
As a result of constant commitment to improvement, it may happen that your
unit deviates in detail from what is described in this manual. For this
reason, the given instructions are only a guideline for the installation, use,
maintenance and repair of the unit referred to in this manual. This manual has
been composed with the utmost care. The manufacturer shall, however, not be
held responsible for any mistakes in this manual nor for any consequences
thereof. The user is allowed to copy this manual for own use. Further all
rights are reserved and nothing in this manual may be reproduced and/or made
public in any way.
Modifications
In case of unauthorized modifications in or on the unit, every liability on
the part of the manufacturer becomes null and void.
INTRODUCTION
General
This manual is intended for the user of the MD (Multi Deck). The features and
controls are being described, along with directions for the safest and most
efficient use, in order to guarantee a long life of the unit.
All pictograms, symbols and drawings in this manual apply to all MD models.
Identification of the unit
The identification plate can be found on the outside of the machine, and contains the following data:
- Name of the supplier or the manufacturer
- Model
- Serial number
- Year of construction
- Voltage
- Frequency
- Power consumption
Pictograms and symbols
In this manual, the following pictograms and symbols are used:
WARNING
Possible physical injury or serious damage to the unit, if the instructions
are not carefully followed.
WARNING
Hazardous electrical voltage.
WARNING
Danger of getting injured by hot surfaces.
Suggestions and recommendations to simplify indicated actions.
Recycling symbol.
Direction of view symbol.
Safety instructions
WARNING
See installation instructions for grounding requirements.
WARNING
The top and bottom of the trays and columns at the back of the unit can be
very hot.
WARNING
The maximum load on top of the unit may never exceed 50 kg (110 lbs.).
The maximum load per shelf may never exceed 35 kg (77 lbs.).
The maximum load of a drawer may never exceed 25 kg (55 lbs.).
WARNING
Never use aggressive or abrasive cleaning agents.
WARNING
Always use the brakes on both front wheels:
General
The user of the unit will be fully responsible for abiding the locally
prevailing safety- rules and regulations.
The pictograms, labels, instructions and warning signs attached to the unit,
are part of the safety measures. They may never be covered or removed, and
have to be clearly visible during the entire lifetime of the unit.
Immediately repair or replace damaged or illegible pictograms, warnings and instructions.
- Only pack the products in bags or containers that are suitable for this purpose.1
- To ensure good contact with the heated trays, only place a single layer of products.
- Make sure that the air slot at the front of the shelf remain free from obstructions.
- The unit must be cleaned regularly to ensure proper functioning.
- To avoid short-circuiting, never clean the unit using a water hose. For cleaning instructions, see section 5.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
Moving (when applicable)
When moving the unit:
- Before moving the unit, first switch off the mains voltage by pulling the plug from the wall socket.
- To avoid damage, remove the lower skirts when necessary.
- The units are not suited to pass ledges or obstacles higher than 10 mm (0.4 inch).
- Make sure that the wheels can move freely, so they never touch the power lead.
Hygiene
The quality of a fresh product always depends on hygiene.
It is essential that products are packaged immediately after preparation. At
that moment, the core temperature of the products should at least be 85°C
(185°F).
Immediately remove products in damaged packaging from the equipment. Clean all components that have come in contact with products from damaged packaging. Refer to section 5.
Service and technical support
The electrical schematics of your unit is included. In case of
malfunctions, you can contact your dealer/service agent. Make sure you have
the following data available:
- Model.
- Serial number.
This data can be found on the identification plate.
Storage
If the unit will not be used temporarily, and will be stored, follow these
instructions:
- Clean the unit thoroughly.
- Wrap the unit from getting dusty.
- Store the unit in a dry, non-condensing environment.
Disposal
Dispose of the machine, any components or lubricants removed from it safely in accordance with all local and national safety and environment requirements.
DESCRIPTION OF THE UNIT
Technical description
The unit uses convection heat. Materials on the unit is made of stainless or coated steel and shatter-resistant clear side glass.
Intended use
The unit has been designed to maintain products at a minimum temperature at
65°C (150°F) for up to four hours. Any other use will not be regarded as
intended use.
The manufacturer accepts no liability whatsoever for loss or injury caused by
failing to strictly adhere to the safety guidelines and instructions in this
manual or due to carelessness during installation, use, maintenance and repair
of the unit referred to in this manual and any of its accessories.
Use the unit in perfect technical condition only.
Accessories
Your unit contains the following standard accessories:
- User manual.
For optional accessories see www.frijado.com.
INSTALLATION AND FIRST USE
WARNING
Electric chock hazard. Grounding instructions: only connect the appliance to
an alternating current provided by a grounded wall socket, with a mains
voltage in accordance with the information indicated on the data plate of the
appliance.
It is the consumer’s responsibility to make sure the electrical installation
conforms with current national and local codes and wiring regulations.
Do not use a multi plug or extension cord. Such can result in fire, electrical
shock, or other personal injuries.
Failure to follow these instructions can result in death or serious injury.
All packing materials used for this unit are suited for recycling.
After unpacking, check the state of the unit. In case of damage, store the packing material, and contact the transporter within fifteen working days after receiving the goods.
- Remove all packaging materials from the unit.
- Remove the foil from the illuminated sign, shelves and child guard.
- Remove all temporary tape.
- Before starting to use the unit, clean the inside with a damp cloth.
- Avoid excessive use of water on the shelves. Make sure no water goes into the air slots.
- Clean the side glass both inside and out. Avoid scratches on all plastic and varnished parts, do NOT use aggressive detergents.
OPERATION AND USE
Switch on
Note: Depending on execution can the heating and lighting be switched separately.
Checking the temperature in the unit
Checking the product temperature
Switch off
DAILY MAINTENANCE
WARNING
Never use aggressive cleaning agents, abrasive cleaning agents or scouring
sponge. Doing otherwise might damage the unit and will void the warranty.
MALFUNCTIONS AND SERVICE
Temperature fault
Replacing a lamp
Placing a price strip
Replacing the child guard
Replacing the mains cord
WARNING
Hazardous electrical voltage.
If the mains cord is damaged, it must be replaced by the manufacturer, by an authorized service agent or a similarly qualified person in order to avoid hazards.
TECHNICAL SPECIFICATIONS
WARNING
Consult the identification plate to get the proper specifications of the unit.
The electrical data may vary from country to country.
European Models
Model | MD60 | MD100 | MD120 |
---|---|---|---|
Dimensions | |||
– Width | 600 mm | 1000 mm | 1200 mm |
– Depth | 800 mm | 800 mm | 800 mm |
– Height 3 level2 | 1420 mm | 1420mm | 1420mm |
– Height 4 level | 1972 mm | 1972 mm | 1972 mm |
– Height 5 level | 1972 mm | 1972 mm | 1972 mm |
Weight Net approx. | |||
– 3 level | 155 kg | 200 kg | 215 kg |
– 4 level | 190 kg | 235 kg | 250 kg |
– 5 level | 209 kg | 274 kg | 300 kg |
Sound pressure | < 70 dB(A) | < 70 dB(A) | < 70 dB(A) |
Electrical installation 3 level
Voltage3| 1N~ 230V| 3N~ 400/230V| 3N~ 400/230V
Frequency| 50/60 Hz| 50/60 Hz| 50/60 Hz
Required power| 2350 W| 3490 W| 4310 W
Plug| 16 A 2 pole + PE| 16 A (3~) CEE
form
| 16 A (3~) CEE
form
Power cord length| 2,40 m| 2,40 m| 2,40 m
| | |
Electrical installation 4 level
Voltage3| 1N~ 230V| 3N~ 400/230V| 3N~ 400/230V
Frequency| 50/60 Hz| 50/60 Hz| 50/60 Hz
Required power| 3000 W| 4500 W| 5400 W
Plug| 16 A 2 pole + PE| 16 A (3~) CEE
form
| 16 A (3~) CEE
form
Power cord length| 2,40 m| 2,40 m| 2,40 m
| | |
Electrical installation 5 level
Voltage3| 3N~ 400/230| 3N~ 400/230V| 3N~ 400/230V
Frequency| 50/60 Hz| 50/60 Hz| 50/60 Hz
Required power| 3600 W| 5400 W| 6500 W
Plug| 16 A (3~) CEE
form
| 16 A (3~) CEE
form
| 16 A (3~) CEE
form
Power cord length| 2,40 m| 2,40 m| 2,40 m
Height MD Eyeline: 1800 mm.
Modification 3N~ 400/230 to 1N~ 230V or 3~230V possible on site, refer to
electrical drawing.
American Models
Model | MD24 | MD40 | MD48 |
---|---|---|---|
Dimensions | |||
– Width | 23 5/8 in | 39 3/8 in | 47 1/4 in |
– Depth | 31 1/2 in | 31 1/2 in | 31 1/2 in |
– Height 3 level | 55 7/8 in | 55 7/8 in | 55 7/8 in |
– Height 4 level | 77 5/8 in | 77 5/8 in | 77 5/8 in |
– Height 5 level | 77 5/8 in | 77 5/8 in | 77 5/8 in |
Weight Net approx. | |||
– 3 level | 342 lbs | 441 lbs | 474 lbs |
– 4 level | 455 lbs | 598 lbs | 654 lbs |
– 5 level | 461 lbs | 604 lbs | 660 lbs |
Sound pressure | < 70 dB(A) | < 70 dB(A) | < 70 dB(A) |
Electrical installation 3 level
Voltage| 1~ 208V| 1~ 208V| | 1~ 208V|
Frequency| 60 Hz| 60 Hz| | 60 Hz|
Amperage| 11.3 A| 17 A| | 21 A|
Plug| NEMA6-20P| NEMA6-30P| | NEMA6-30P|
Power cord length| 10 ft.| 10 ft.| | 10 ft.|
| | | | |
Electrical installation 4 level
Voltage| 1~ 208V| 1~ 208V| 3~ 208V| 1~ 208V| 3~ 208V
Frequency| 60 Hz| 60 Hz| 60 Hz| 60 Hz| 60 Hz
Amperage| 14.2 A| 21.6 A| 15 A| 26.5 A| 17.6 A
Plug| NEMA6-20P| Note 1)| NEMA15-20P| Note 2)| NEMA15-30P
Power cord length| 10 ft.| Note 1)| 10 ft.| Note 2)| 10 ft.
| | | | |
Electrical installation 5 level
Voltage| 1~ 208V| 1~ 208V| 3~ 208V| 1~ 208V| 3~ 208V
Frequency| 60 Hz| 60 Hz| 60 Hz| 60 Hz| 60 Hz
Amperage| 17.1 A| 26.5 A| 15 A| 32 A| 19.1 A
Plug| NEMA6-30P| Note 2)| NEMA15-20P| Note 2)| NEMA15-30P
Power cord length| 10 ft.| Note 2)| 10 ft.| Note 2)| 10 ft.
Note 1: Unit supplied with 3 phase cord and plug. Single phase to be
converted in the field. Required plug NEMA6-30P and cable 12 AWG.
Note 2: Unit supplied with 3 phase cord and plug. Single phase to be
converted in the field. Required plug NEMA6-50P and cable 8 AWG.
Fri-Jado Inc.
1401 Davey Road, Suite 100 Woodridge IL 60517
USA
Tel: +1-630-633-7950
www.frijado.com