fri-jado BC 5 Hood BC Air Conditioner User Manual
- June 3, 2024
- fri-jado
Table of Contents
- **
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**
**
fri-jado BC 5 Hood BC Air Conditioner
KEEP THIS USER MANUAL FOR FUTURE USE
© 2019 Fri-Jado BV, Oud-Gastel, The Netherlands.
We advise you to contact your supplier for the guarantee period and
conditions. Further we refer to our General Terms and Conditions for Sales and
Delivery that are available upon request. The manufacturer does not accept any
liability for damage or injury caused by failing to adhere to these
regulations or by not observing the usual caution or care in actions,
operation, maintenance or repair activities, even if not explicitly described
in this manual. As a result of constant commitment to improvement, it may
happen that your unit deviates in detail from what is described in this
manual. For this reason, the given instructions are only a guideline for the
installation, use, maintenance and repair of the unit referred to in this
manual. This manual has been composed with the utmost care. The manufacturer
shall, however, not be held responsible for any mistakes in this manual nor
for any consequences thereof. The user is allowed to copy this manual for own
use. Further all rights are reserved and nothing in this manual may be
reproduced and/or made public in any way.
Modifications:
In case of unauthorized modifications in or on the unit, every liability on
the part of the manufacturer becomes null and void.
INTRODUCTION
General
This manual describes the cleaning of the extraction hood. The hood is
available for the basic convection oven. It can be placed on single or stacked
(double) unit.
Identification of the unit
The identification plate can be found on the outside of the machine, and
contains the following data:
- Name of the supplier or the manufacturer
- Model
- Serial number
- Year of construction
- Voltage
- Frequency
- Power consumption
Pictograms and symbols
In this manual, the following pictograms and symbols are used:
Safety instructions
WARNING
The outside of the unit can be very hot.
- Place no load on top of the unit.
- Risk of slippery floor: Spills may cause slippery surfaces, clean-up promptly.
The user of the unit will be fully responsible for abiding the locally
prevailing safety- rules and regulations.
The unit may be operated by qualified and authorised persons only. Anyone
working on or with this unit must be familiar with the contents of this manual
and carefully follow all guidelines and instructions. Never change the order
of the steps to be performed. The management must instruct the personnel on
the basis of this manual and follow all instructions and regulations. The
pictograms, labels, instructions and warning signs attached to the unit, are
part of the safety measures. They may never be covered or removed, and have to
be clearly visible during the entire lifetime of the unit. Immediately repair
or replace damaged or illegible pictograms, warnings and instructions.
- To avoid short-circuiting, never clean the unit using a water hose. For cleaning instructions, see section 5.
- During use, the unit can get very hot.
- The unit must be cleaned regularly to ensure proper functioning.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
Service and technical support
The electrical schematics of your unit is included. In case of malfunctions you can contact your dealer/service agent. Make sure you have the following data available:
- Model.
- Serial number.
This data can be found on the identification plate.
Storage
If the unit will not be used temporarily, and will be stored, follow these
instructions:
- Clean the unit thoroughly.
- Wrap the unit from getting dusty.
- Store the unit in a dry, non-condensing environment.
Disposal
Dispose of the machine, any components or lubricants removed from it safely in
accordance with all local and national safety and environment requirements.
DESCRIPTION OF THE UNIT
Technical description
The extraction-hood is controlled by the main switch. The plating of the unit is made of stainless steel. The mains cable is provided with a plug.
Accessories
Your unit contains the following standard accessory:
- User manual.
INSTALLATION AND FIRST USE
- All packing materials used for this unit are suited for recycling.
After unpacking, check the state of the unit. In case of damage, store the packing material, and contact the transporter within fifteen working days after receiving the goods.
Unpacking the unit
The Exhaust-Hood is placed in a cardboard box with protective corners on a wooden pallet.
Installation
WARNING
Place the Exhaust Hood only on a levelled unit. A inclined plane of maximum 5°
is allowed.
- Ensure there is sufficient freedom above the unit.
- Note the mass of the Exhaust-Hood. Lift the hood with two or more persons.
OPERATION AND USE
Switching on the unit
Switch on the extraction-hood with the power button.
Switching off the unit
Switch off the extraction-hood with the power button.
CLEANING AND MAINTENANCE
WARNING
Appliance must be disconnected from the power supply during cleaning or
maintenance and when replacing parts.
- Never use a water hose for cleaning. Water can seep into the unit through the ventilation holes of the unit.
- Because of hygiene aspects and optimum condition of the unit it is of utmost importance to keep a daily cleaning pattern from first use onwards.
Maintenance schedule
| Item | Action | Frequency |
|---|---|---|
| Exterior |
- Clean, see section 5.2
- Use Stainless Steel cleaning spray to remove stains, and restoring the gloss.
| Weekly
Grease-filters|
- Clean, see section 5.2
| Weekly
Weekly maintenance
WARNING
Do not use aggressive or abrasive materials. These will damage the surface
which will make it more difficult to remove dirt.
The exterior:
- Clean the exterior with cleaning agent. agent.
- Dry the exterior thoroughly by using a dry cloth.
- Switch off the unit.
- Remove the filter by moving the two slide buttons inwards.
- Clean the filter with a non-aggressive cleaning agent or hot water combined with a detergent. Let the filters dry.
- Reassemble the filter in reverse order.
- Switch on the unit.
MALFUNCTIONS AND SERVICE
Before you contact your supplier/dealer in case of a malfunction, there are some items you can check yourself:
- Is the power supply working properly?
- Check fuses and differential switch.
| Item | Malfunction | Possible action |
|---|---|---|
| Fan. | Fan not spinning. |
- Switch on the unit
- Check fuses and/or the differential switch
- Check the fan, see section 6.1
Mains cord.| Damaged.|
- Replace, see section 6.2
Check the fan
WARNING
Remove the power plug from the wall socket.
- Switch off the unit.
- Remove the power plug from the wall socket.
- Remove the filter
- Check what’s blocking the fan blade.
Replacing the mains cord
WARNING
Hazardous electrical voltage.
If the mains cord is damaged, it must be replaced by the manufacturer, his
service agent or a similarly qualified person in order to avoid hazards.
TECHNICAL SPECIFICATIONS
WARNING
Consult the identification plate to get the proper specifications of the unit.
The electrical data may vary from country to country.
European Models
Model|
---|---
Dimensions|
Width| 840 mm
Depth| 830 mm
Height| 156 mm
Sound pressure| < 70 dB(A)
Electrical installation|
Voltage| 1N~ 230 V
Frequency| 50/60 Hz
Required power| 0.4 kW
Max. nom. current| 1.5/1.7 A
Plug| Schuko 16 A
Length of power cable| 2,20 m
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>